IC200MDL730 GE Fanuc Versamax 8-Point 24VDC Output Module

Product Overview

• The IC200MDL730 is a high-performance Versamax Discrete Output Module.
• It provides 8 sourcing (positive logic) outputs for industrial switching applications.
• This module features integrated electronic protection against overcurrent and short circuits.
  

Technical Specifications

• Brand: GE Fanuc
• Model: IC200MDL730
• Output Voltage: 17.5 to 30 Volts DC (24VDC nominal).
• Current Rating: High-capacity 2.0 Amps per point at 30VDC.
• Response Time: Ultra-fast 0.5ms for precision timing control.
• Isolation: Non-isolated between points or groups.
• Backplane Load: Low power consumption of 50mA at 5VDC.
• External Supply: Requires 18 to 30 VDC field power.
• Diagnostics: OK, FLD PWR, and 8 individual amber fault/status LEDs.

Configuration Tree

• IC200MDL730 Versamax Discrete Output
  • ∟ Point Density: 8 Discrete Outputs in 1 Group
    • ∟ Architecture: Scalable Versamax modular platform
  • ∟ Safety Layer: Integrated Electronic Short Circuit Protection
• ∟ Output Logic: Positive Logic (Sourcing Type)

Global PLC Spare HUB's Insight

• The IC200MDL730 is the workhorse of the Versamax family for high-current loads.
• Unlike lower-spec modules, its 2.0A rating reduces the need for external interposing relays.
• The intelligent fault reporting allows the CPU to identify specific point-level failures immediately.
• Engineers value its compact footprint, which maximizes cabinet space in distributed I/O setups.

Diagnostic Capabilities & Applications

• Fault Identification: Amber LEDs provide instant visual cues for short circuits or overload conditions.
• Dynamic Reporting: Fault data is transmitted to the PLC CPU for system-wide diagnostics.
• Typical Scenarios: Heavy-duty solenoid control, contactor coils, and industrial actuators.
• Equipment Fit: Seamlessly integrates with IC200CPB001 and other Versamax controllers.

Installation & Maintenance

• Sequencing: Ensure backplane power is active for 1s before applying field voltage.
• Hot Swapping: Supports hot-insertion; verify carrier alignment to protect backplane pins.
• Energy Storage: Use local capacitors if your external power supply has limited peak capacity.
• Wiring: Use appropriate gauge wire for the 2.0A load current to prevent voltage drops.

Commercial Logistics

• Warranty: Includes a 12-month comprehensive quality guarantee.
• Global Shipping: Priority delivery via FedEx, UPS, and DHL.
• Dispatch: Guaranteed 24-48 hour processing for in-stock inventory.
• Product Condition: Original equipment from GE Fanuc / Emerson.

FAQ and Selection Guidance

• How do I identify a short circuit on a specific output?
• Look for the amber LED corresponding to the output point; this indicates a fault condition like a short.
• Can I mix sinking and sourcing devices on the IC200MDL730?
• No, this module is strictly for sourcing (positive logic) applications where the load is tied to the common negative.
• What is the "Experience-Based" tip for high-current operation?
• Since there is no thermal derating, you can run all 8 points at 2.0A, but ensure your I/O carrier wiring is rated for the total 16A current.
• Does this module require a specific carrier?
• It is compatible with standard Versamax I/O carriers, but check the terminal torque specs in the manual.
• How do I reset the module after an overcurrent event?
• Clear the physical fault at the load, then acknowledge the fault in the PLC software or cycle the field power.

Tags