GE Fanuc IC693MDL752 Series 90-30 32-Point TTL/24VDC Output Module

Product Introduction

The IC693MDL752 serves as a high-density discrete output solution for the Series 90-30 PLC platform. This negative logic (sinking) module manages up to 32 independent output channels with exceptional precision. Engineers often select this module for its unique ability to bridge the gap between standard 24VDC field devices and 5VDC TTL logic circuits. 

Technical Specifications

• Brand: GE Fanuc / Emerson Automation
• Model: IC693MDL752
• Series: Series 90-30
• Module Type: Discrete Negative Logic (Sinking) Output
• Channel Count: Thirty-Two (32) Points arranged in 4 Isolated Groups
• Voltage Range (12/24V Mode): 10.2 to 28.8 VDC
• Voltage Range (TTL Mode): 4.75 to 5.25 VDC
• Peak Inrush Current: 4.6 Amperes for 20 milliseconds
• Output Voltage Drop: Maximum 0.3 Volts
• Off-State Leakage: 1.0 mA Maximum
• Response Time: 0.5 ms (On/Off)
• Isolation Rating: 1500V Field-to-Logic; 250V Group-to-Group
• Backplane Current Draw: 260mA at 5VDC (Maximum)
• Environmental Tolerance: Designed for standard industrial control cabinet environments
• Interference Immunity: Built-in opto-coupler isolation for high-noise rejection

Configuration Breakdown

• IC693MDL752 Platform Architecture
  • Operational Mode Selection
    • Standard 12/24 VDC Mode
      • 0.5A per point capacity
      • Optimized for solenoids and relays
    • High-Speed TTL Mode
      • 5 VDC nominal operation
      • Ideal for logic-level interfacing
  • Connection Interface
    • Dual 24-pin Front Connectors
    • Compatible with IC693CBL327 Flying Lead Cables
    • Supports Terminal Block Quick Connect (TBQC)

Installation and Compatibility

The IC693MDL752 installs directly into any standard I/O slot of a Series 90-30 baseplate. It integrates seamlessly with IC693 CPUs and expansion racks. For streamlined wiring, use the IC693CBL328 pre-terminated cable assembly. This avoids manual pin-out errors during high-density deployments.

Diagnosis and Maintenance

The module features front-facing LED indicators for real-time status monitoring. These lights provide immediate visual confirmation for each output point's state. Routine maintenance involves checking the 24-pin connector seating and verifying user-side power supply stability. The negative logic design ensures the module sinks current safely during active-low operations.

Typical Application Scenarios

• Interfacing with high-speed TTL logic gates in specialized machinery.
• Driving 24VDC pilot lights and small contactors in automation skids.
• Control systems requiring high-density output points in limited rack space.
• Hybrid voltage environments involving both 5V and 24V peripheral devices.

Shipping and Warranty

• Packaging List: One (1) New IC693MDL752 module in protective anti-static packaging.
• Warranty: 12-month comprehensive functional warranty.
• Shipping Lead Time: Orders ship within 24-48 hours.
• Express Carriers: Worldwide delivery via FedEx, UPS, and DHL.

Frequently Asked Questions (FAQ)

Can I mix TTL and 24V modes on the same module?

Yes, each of the four groups is independently configurable for either voltage mode.

What happens if I exceed the 3 Ampere limit per common pin?

Overcurrent may damage the internal traces. Always calculate total simultaneous load per group.

How do I choose between the direct wiring and TBQC method?

Select the IC693CBL327 for custom lengths. Use TBQC for faster field replacement and troubleshooting.

Why are my outputs failing to switch despite the LEDs being ON?

Verify that the external user power supply is correctly wired to the specific group's common.

Purchasing Guide

When ordering the IC693MDL752, confirm your existing cable compatibility. If replacing an older GE Fanuc unit, this Emerson version provides 1:1 functional equivalence. Ensure your power supply matches the 0.5A per point requirement for 24V inductive loads. For mission-critical systems, always stock one spare unit to minimize potential production downtime.

Tags