GE Fanuc IC200UDD110 Micro PLC Unit 16 In / 12 Out Transistor Module

Product Overview

• The IC200UDD110 is a versatile 28-point Micro PLC designed for compact automation.
• It integrates 16 digital inputs and 12 transistor outputs in a single DIN-rail mounted unit.
• Equipped with 10kHz High-Speed Counters (HSC) and PWM outputs for precise motion tasks.
• We recommend technical operators verify power supply stability within the 19.2-30Vdc range before startup.

Technical Specifications

• Brand: GE Fanuc
• Model: IC200UDD110
• Total I/O: 28 Points (16 In / 12 Out).
• Input Voltage: 24Vdc nominal; ON state ≥15Vdc.
• Transistor Outputs: 4x 1A (High-load) and 8x 0.75A (Standard-load).
• Isolation: 1500V RMS field-to-logic galvanic protection.
• Motion Control: 4x 10kHz counters and 4x 5kHz PWM outputs.
• Response Speed: 0.1ms output switching; 100µs high-speed input capture.
• Form Factor: Compact 460g module for space-constrained control cabinets.

Configuration Tree

• IC200UDD110 Micro PLC Assembly
• ∟ Input Logic: 16-point 24Vdc with 4 isolated groups
• ∟ Output Logic: 12-point 24Vdc Transistor (Sourcing)
• ∟ Functional Extras: Integrated HSC/PWM high-speed hardware
• ∟ Mounting: Integrated 35mm DIN-rail locking mechanism

Global PLC Spare HUB's Insight

• The IC200UDD110 provides an all-in-one control solution that bypasses the need for modular I/O racks.
• Its high-speed counting capabilities make it ideal for simple positioning tasks without a dedicated motion card.
• The GE Fanuc Micro series is renowned for its reliability in dusty and high-vibration industrial zones.
• Engineers favor this model for its 1500V isolation, which acts as a robust firewall for the internal logic.

Diagnostic Capabilities & Applications

• Visual Feedback: Comprehensive LED array for Run, Stop, Fault, and individual I/O status.
• Software Diagnostics: Real-time monitoring of counter values and pulse outputs via serial interface.
• Target Equipment: Packaging machinery, pump skids, small-scale assembly lines, and conveyor drives.
• Motion Tasks: Direct control of stepper motor drives and high-frequency pulse-counting sensors.

Installation & Maintenance

• Thermal Management: Maintain ambient cabinet temperature below 55°C for maximum lifespan.
• Fusing: Mandatory external fusing is required for transistor outputs to prevent internal FET damage.
• Grounding: Ensure the DIN rail is properly bonded to earth ground to minimize signal noise.
• Power: Logic power must be within 19.2-30Vdc to maintain 1500V isolation integrity.

Commercial Logistics

• Warranty: Full 12-month industrial quality assurance.
• Shipping Partners: Worldwide priority dispatch via FedEx, UPS, and DHL.
• Handling Time: In-stock units are processed and shipped within 24-48 hours.
• Packing List: Contains one (1) new/genuine IC200UDD110 PLC unit.

FAQ and Selection Guidance

• Can I use the IC200UDD110 for high-frequency pulse width modulation?
• Yes, it supports up to four 5kHz PWM outputs suitable for basic motor speed control.
• What is the maximum current capacity of the 12 outputs combined?
• The total load must not exceed the power supply capacity; individual outputs are limited to 1A (Q1/2/11/12) or 0.75A (Q3-10).
• How do I prevent false triggers on the high-speed inputs?
• Expert Tip: Use shielded cables and keep 24Vdc signal wires away from high-voltage AC motor leads.
• Does this unit support expansion I/O?
• The Micro PLC is typically a stand-alone unit; check your CPU firmware version for specific serial expansion capabilities.
• What happens if the input voltage drops below 15Vdc?
• The input may flicker or fail to register as "ON," leading to logic errors. Always maintain a stable 24Vdc field supply.

Tags