Emerson DeltaV SE4304T01 AO 4-20mA HART CHARM I/O Module

Global PLC Spare HUB's Insight

• The Emerson DeltaV SE4304T01 represents a pinnacle in Electronic Marshalling technology.
• It utilizes CHARM architecture to eliminate traditional cross-wiring complexities.
• The module integrates into DeltaV S-series and M-series environments seamlessly.
• It provides flexible I/O mapping for critical process control loops.
• Engineering teams value the late-binding I/O capabilities for reduced cabinet footprint.

Product Introduction

• The SE4304T01 is a high-performance Analog Output 4-20 mA HART CHARM.
• This module converts digital control signals into precision analog currents.
• It supports HART v7 pass-through for advanced instrument asset management.
• The Electronic Marshalling design allows landing field wires anywhere.
• Signals assign to any controller electronically for maximum flexibility.

Technical Specifications

• Brand: Emerson DeltaV
• Model: SE4304T01
• Module Type: AO 4-20 mA HART CHARM
• Nominal Signal Range: 4 to 20 mA (Optional 0 to 20 mA)
• Full Signal Range: 0 to 24 mA for over-range capabilities
• Resolution: High-precision 16-bit D/A converter
• Accuracy (0 to 60°C): 0.25% of span for tight control
• Accuracy (-40 to 70°C): 0.5% of span in extreme conditions
• Frequency Response: HART updates occur faster than every second
• Available Field Power: 20 mA at 15V DC into 750 Ohm load
• Heat Dissipation: Efficient 0.48 W low-heat design
• Anti-Interference: Built-in 24 mA current limiting circuit
• Environment Tolerance: Rated for G3 harsh environmental levels

Installation and Compatibility

• Controller Support: Compatible with SD Plus, SX, and SQ controllers
• Modern Integration: Supports MD Plus, MQ, MX, and PK controllers
• Software Requirement: Requires DeltaV v11.3.1 or v14.3 depending on hardware
• System Networking: Works on DeltaV Area Control Network (ACN)
• Mounting: Plugs directly into the CHARM terminal block
• Inter-Controller Support: Fully supports references between different controller types

Maintenance and Diagnostics

• HART Support: Provides HART v7 pass-through for AMS Device Manager
• Status Monitoring: Real-time device status available to the control strategy
• Calibration: Factory calibrated and requires no field calibration
• Field Protection: Detects field wiring disconnects automatically
• System Health: Monitor communication loading via DeltaV Diagnostics

Certification Information

• Hazardous Area (US/Canada): Class I, Division 2, Groups A, B, C, D
• Zone Ratings: AEx ec IIC Gc T4 and Ex ec IIC Gc T4
• European Safety: ATEX II 3G Ex ec IIC T4 Gc compliant
• Marine Standards: Certified by ABS, DNV, and IACS E10
• Cybersecurity: Achilles Communications Certification Level 1 and Level 2
• General Standards: CE, FM, CSA, and IEC-Ex listed

Packaging and Shipping

• Packing List: One (1) New SE4304T01 Analog Output CHARM
• Warranty: 12-month standard warranty coverage
• Shipping Carriers: Worldwide delivery via FedEx, UPS, or DHL
• Dispatch Time: Ready for shipment within 24 to 48 hours

Typical Application Scenarios

• Chemical Processing: Precise control of modulating valves in corrosive environments.
• Oil and Gas: Remote I/O deployment in hazardous Class I Div 2 areas.
• Pharmaceuticals: High-resolution signal output for sensitive batch control.
• Power Generation: Reliable field instrument integration with HART diagnostics.

FAQ: Selection and Experience

• Why choose the SE4304T01 over standard I/O?
  It eliminates physical marshalling cabinets and allows flexible software-based I/O assignment.
• Does this module support non-HART devices?
  Yes, you can configure it for standard 4-20 mA or 0-20 mA signals.
• How do I check if my controller can handle more CHARMs?
  Check the Time Utilization Chart in DeltaV Diagnostics to verify communication capacity.
• What is the primary benefit of the 16-bit D/A converter?
  It provides finer control increments for precise actuator and valve modulation.
• Can I mix this module with other CHARM types?
  Yes, the Electronic Marshalling baseplate supports mixing various signal types.

Tags