330905-00-13-10-02-05 Bently Nevada 3300 NSv Proximity Sensor

Product Overview

The Bently Nevada 3300 NSv Series eddy current proximity probe measures non-contact shaft vibration and axial position. The 330905-00-13-10-02-05 sensor excels in tight installation spaces and small target environments. Its Polyphenylene Sulfide (PPS) tip delivers high chemical resistance in harsh processing conditions. Engineers frequently deploy this probe on small hydro-turbines, centrifugal gas compressors, and high-speed turbomachinery.

Technical Specifications

Mechanical Specifications & Design

• Thread Profile: M10x1 metric thread pattern
• Unthreaded Length: 0 mm (-00 option)
• Overall Case Length: 130 mm (-13 option)
• Total Length: 1.0 meter (39 in) (-10 option)
• Connector Type: Miniature coaxial ClickLoc connector with standard cable (-02 option)
• Probe Tip Material: Polyphenylene Sulfide (PPS)
• Case Material: AISI 304 Stainless Steel

Installation Guide

• Set the initial mechanical gap to 1.0 mm (40 mils) from the target surface.
• Confirm target diameter meets the 13 mm (0.5 in) recommended minimum size.
• Tighten the M10x1 probe case to 11.3 N·m (100 in·lb) recommended torque.
• Do not exceed the 0.56 N·m (5 in·lb) maximum torque on the ClickLoc connector.
• Maintain a minimum cable bend radius of 25.4 mm (1.0 in) during routing.

Debugging & Maintenance Convenience

The ClickLoc connector locks securely to prevent accidental loosening from machine vibration. Field technicians verify probe resistance quickly using a multimeter. Expect a center-to-outer conductor resistance reading of 4.2 ± 0.5 ohms on a 1.0-meter probe.

System Compatibility & Interchangeability

The 3300 NSv Series probe works seamlessly with standard 3300 NSv extension cables and Proximitor sensors. It completely replaces legacy Bently Nevada 3300 RAM proximity probes. It also provides superior side-view clearance compared to 3000-series 190 probes.

Agency Approvals & Certifications

The 330905-00-13-10-02-05 carries Option -05 Multiple Approvals. It meets global hazardous area classification standards for North American, European, and international industrial environments.

Package Contents, Warranty & Shipping

• Packaging: 100% Brand New and Original in Factory Sealed Packing
• Factory Warranty: 12 Months full coverage
• Dispatch Speed: Ships within 24 to 48 hours
• Logistics Partners: Express delivery via FedEx, UPS, and DHL

Typical Applications & Diagnostic Capabilities

Engineers use the 330905-00-13-10-02-05 probe for axial thrust positioning and radial dynamic vibration tracking. It monitors high-speed gearboxes, centrifugal gas compressors, pumps, and electric motors. Vibration analysts convert its AC dynamic output into FFT spectrums to diagnose unbalance, misalignment, and bearing wear.

Global PLC Spare HUB's Insight

Our field engineers installed the 3300 NSv Series on a overhung process compressor with restricted clearance. Standard 8mm probes suffered side-wall interference from the tight casing internal counterbores. The 330905-00-13-10-02-05 eliminated phantom voltage spikes caused by side clearance limitations. Its PPS tip also withstood aggressive hydrocarbon gas exposure without degrading.

Selection Comparison & Technical Recommendations

Compare the 330905-00-13-10-02-05 with alternative regional variants before ordering:

• Standard Model: 330905-00-13-10-02-05 features international agency approvals for global hazardous plant areas.
• Regional Equivalent: 330905-00-13-10-02-CN targets installations requiring localized Chinese agency certifications.

Technical Advice: Always match the total probe and extension cable length to your Proximitor sensor calibration (5m or 9m system length).

Frequently Asked Questions (FAQ)

Q: What is the main benefit of the 3300 NSv over standard 3300 XL probes?

A: The NSv probe features a smaller tip diameter and superior side-view clearance for narrow installation spaces.

Q: Can I connect this probe directly to a vibration monitor?

A: No, you must connect it to a matching 3300 NSv Proximitor Sensor using an extension cable.

Q: How do I verify if my probe cable has damaged wiring?

A: Measure the resistance between the center conductor and outer conductor. A healthy 1.0m probe reads 4.2 ± 0.5 ohms.

Q: What should I consider when selecting unthreaded and thread lengths?

A: Measure your machine casing thickness carefully to ensure the probe tip extends flush into the target area without bottoming out.

Tags