330901-00-08-05-02-05 Bently Nevada 3300 NSv Proximity Probe - New Stock

Product Introduction

The Bently Nevada 330901-00-08-05-02-05 is a high-precision 3300 NSv proximity probe designed for small-shaft vibration and position measurements. Engineered for tight spaces where standard probes cannot fit, this sensor utilizes eddy-current technology to monitor target movement without physical contact. For detailed installation clearances and voltage output curves, please download the technical documentation here: Download 3300 NSv Datasheet & Manual.

Technical Breakdown: Configuration Tree

• 330901 — 3300 NSv Probe (1/4-28 UNF Thread, No Armor)
  • └─ 00 — Unthreaded Length: 0.0 in
  • └─ 08 — Overall Case Length: 0.8 in
  • └─ 05 — Total Length: 0.5 meter (20 in)
  • └─ 02 — Miniature Coaxial ClickLoc Connector
  • └─ 05 — Multiple Agency Approvals (Hazardous Areas)

Engineering Specifications

• Brand: Bently Nevada
• Model: 330901-00-08-05-02-05
• Probe Tip Material: Polyphenylene sulfide (PPS) high-performance polymer
• Case Material: AISI 304 Stainless Steel (SST)
• Cable Impedance: 75 Ω coaxial with FEP insulation
• DC Resistance: 4.0 ± 0.5 Ω (Center to Outer Conductor)
• Operating Temperature: -52°C to +177°C (-62°F to +351°F)
• Pressure Seal: Integrated Viton O-ring for differential pressure integrity
• Standard Compliance: Certified for EPL Ga, Gc, and Dc environments

Global PLC Spare HUB's Insight

The 330901-00-08-05-02-05 is the "Small Machine Specialist." Unlike the 3300 XL series, the 3300 NSv (Near Side Vibration) is optimized for targets with a small radius of curvature, such as small pump shafts. Its miniature ClickLoc connector prevents signal noise caused by vibration-induced loosening. This specific 330901 configuration is mandatory for replacements in tight centrifugal compressors where a short case length is required for clearance.

Target Equipment & Diagnosis

• Centrifugal Pumps: Monitoring shaft radial vibration and axial thrust position.
• Small Steam Turbines: High-accuracy detection of unbalance and bearing wear.
• Gearboxes: Measuring gear mesh frequency and shaft eccentricity.
• Diagnostic Capabilities: Identifies oil whirl, whip, and rotor-to-stator rubs in real-time.

Commercial Logistics & Warranty

• Condition: Factory New and Original (Made in U.S.A.)
• Warranty Protection: Full 12-Month Factory Warranty
• Dispatch Time: Fast shipping within 24-48 hours
• Courier Partners: Worldwide express delivery via FedEx, UPS, or DHL
• Procurement Advice: Always verify thread engagement limits (0.563 in max) during installation.

Industrial FAQ (Experience-Based)

• Q: Why does the 330901-00-08-05-02-05 use 75 Ω cable instead of 50 Ω?
• A: The 3300 NSv system is engineered with 75 Ω impedance to maintain signal linearity on small-diameter shafts where standard 8mm probes experience "side-viewing" interference.
• Q: Can I use this probe with a standard 3300 XL Proximitor?
• A: No. The 330901 must be paired with a 3300 NSv Proximitor Sensor. Mismatching will lead to incorrect scale factors and false alarms.
• Q: What is the significance of the "05" total length in this model?
• A: This indicates a 0.5-meter lead. Ensure your extension cable length, when combined with this 0.5m, matches the system calibration (typically 5m or 7m total).
• Q: How do I protect the probe seal in extremely cold environments?
• A: Avoid sustained exposure below -34°C (-30°F) before machine startup, as the Viton O-ring can lose elasticity, potentially compromising the pressure seal.
• Q: Is the ClickLoc connector compatible with standard BNC?
• A: No, the 02 option features a miniature ClickLoc coaxial connector designed for high-vibration security; it requires a matching ClickLoc extension cable.

Tags

PDF

• Download PDF