200150-10-05 Bently Nevada Trendmaster Pro Accelerometer Sensor In Stock
Manufacturer: Bently Nevada
Product No.: 200150-10-05
Condition： In stock
Product Type: Accelerometer Sensor
Product Origin: USA
Payment: T/T, Western Union
Weight: 300g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Product Overview
The 200150-10-05 is a general-purpose piezoceramic accelerometer engineered for the Bently Nevada Trendmaster Series condition monitoring systems. This sensor utilizes a shear-mode ceramic sensing element to measure casing vibration across industrial rotating machinery. Its 316L stainless steel hermetic housing and multiple hazardous area certifications allow direct mounting in harsh processing environments. The sensor integrates with Trendmaster Pro or Trendmaster 2000 ProTIM modules using a standard acceleration-to-velocity channel type.
Configuration & Part Number Breakdown
Model Structure: 200150-AA-BB
-
AA (Mounting Stud Option): 10
- 3/8-24 to 1 NPT thread adapter with 1-3/8 inch hex mounting stud
-
BB (Agency Approval Option): 05
- Multiple Approvals rating (CSA, ATEX, and IECEx certified for hazardous locations)
Technical & Electrical Specifications
| Brand & Origin | Bently Nevada (Made in U.S.A.) |
| Model & Part Number | 200150-10-05 (Trendmaster Series) |
| Sensitivity | 10.2 mV/(m/s²) [100 mV/g] ±12% at 80 Hz reference frequency |
| Measurement Range | ±245 m/s² peak (±25 g peak) dynamic motion range |
| Frequency Response | 10 Hz to 1000 Hz (600 to 60,000 CPM) ±10% referenced to 80 Hz |
| Mounted Resonant Frequency | Greater than 20 kHz (>1,200 kcpm) |
| Amplitude Linearity | ±2% from 1 g to 10 g peak vibration levels |
| Transverse Sensitivity | Less than or equal to 7% cross-axis interference |
| Excitation Voltage & Current | 4.7 Vdc to 5.5 Vdc supply voltage; less than 800 µA quiescent current draw |
| Output Bias Voltage & Settling | +2.5 Vdc ± 0.23 Vdc bias voltage; bias settling time under 300 ms |
| Noise Floor Resolution | 14.7 mm/s² (1.5 mg) minimum detectable vibration resolution |
Mechanical & Environmental Specifications
| Sensing Construction | Shear-geometry ceramic element housed in 316L stainless steel |
| Hermetic Seal Rating | 5 x 10⁻⁸ atm·cc/s maximum helium leak rate (100% relative condensing humidity immunity) |
| Operating Temperature | -40°C to +105°C (-40°F to +221°F) continuous operating thermal range |
| Axial Shock Limit | 49,050 m/s² peak (5,000 g peak) maximum non-destructive shock capacity |
| Physical Dimensions & Mass | 17.5 mm hex x 45.7 mm height (11/16 in x 1.8 in); 58 g (2.0 oz) typical weight |
| Mounting Thread & Torque | 3/8-24 female mounting connection; 2.7 N·m to 6.8 N·m (2 ft·lbf to 5 ft·lbf) installation torque |
Target Machinery & Diagnostic Capabilities
The 200150-10-05 accelerometer monitors general machinery train components including electric motors, balance-of-plant pumps, small gearboxes, and centrifugal blowers. When tied to Trendmaster Pro TIM channels, the sensor output converts into overall vibration velocity levels or peak spectral data. Diagnostic engineers analyze this signal to identify structural looseness, rolling element bearing degradation, shaft misalignments, and rotor unbalance during early failure phases.
Global PLC Spare HUB's Insight
During routine predictive maintenance integration on a battery of cooling water pumps, high ambient electrical noise intermittently corrupted standard vibration lines. Installing the Trendmaster Series 200150-10-05 sensors resolved signal attenuation due to the shear ceramic element's low cross-axis susceptibility. Utilizing the 1 NPT adapter option allowed rigid thread engagement into existing bearing housing taps, delivering clean 10-1000 Hz spectral data back to the ProTIM network without signal drift.
Model Selection Comparison & Technical Recommendations
Compare the 200150-10-05 with alternative mounting variants within the Trendmaster Series:
- Large Thread Adapter Variant: 200150-10-05 includes a heavy-duty 3/8-24 to 1 NPT stud adapter suited for direct replacement into 1-inch conduit or process taps.
- Standard Thread Adapter Variant: 200150-05-05 utilizes a smaller 3/8-24 to 1/2-20 UNF stud adapter for tight spaces or direct tapped flat surface mounts.
Selection Advice: Verify the existing tapped hole thread on the machinery bearing housing prior to purchasing. If your site utilizes standard 1/2-20 tapped holes on motor endbells, choose the 200150-05-05. If you require rigid mounting into 1 NPT pipe thread entries on rugged pump casings, specify the 200150-10-05.
Warranty, Shipping & Product Quality
- Condition: 100% Brand New and Original in Factory Sealed Packaging
- Factory Coverage: Comprehensive 12 Months factory warranty provided
- Dispatch Lead Time: Fast shipping within 24 to 48 hours from order placement
- Global Carriers: Shipped worldwide via express FedEx, UPS, and DHL couriers
Frequently Asked Questions (FAQ)
Q: How does the 200150 accelerometer power requirement differ from standard 24 Vdc loop-powered sensors?
A: It requires low excitation voltage between 4.7 Vdc and 5.5 Vdc, which is supplied directly by the Trendmaster ProTIM interface module.
Q: Can I connect this sensor directly to a 4-20 mA PLC analog input card?
A: No, it produces a raw mV voltage signal and must connect through a Trendmaster ProTIM module to process digital trend data.
Q: What occurs if technicians over-torque the 3/8-24 mounting thread past 6.8 N·m?
A: Excessive mounting torque distorts the 316L stainless steel base, pre-stressing the ceramic shear element and skewing sensitivity calibration.
Q: Is thread sealant or Teflon tape recommended on the 1 NPT mounting stud adapter?
A: Avoid insulating tape on the primary mounting faces. Metal-to-metal contact is essential for clean high-frequency vibration transmission up to 1000 Hz.
Q: How do field teams determine if a sensor bias voltage has drifted out of spec?
A: Measure DC voltage across SIG+ and SIG- under static conditions. A healthy unit measures between +2.27 Vdc and +2.73 Vdc.
Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.
People Also Bought
