1747-AENTR Allen-Bradley SLC 500 EtherNet/IP Adapter Migration Module

Manufacturer: Allen-Bradley
Product No.: 1747-AENTR
Condition： In stock
Product Type: Ethernet/IP Adapter
Product Origin: USA
Payment: T/T, Western Union
Weight: 540g
Shipping port: Xiamen
Warranty: 12 months

Quantity

Selected quantity: 1

Estimate delivery times: 12-26 days (International), 3-6 days (United States).

Return within 30 days of purchase. Duties & taxes are non-refundable.

Guaranteed Safe Checkout

Allen-Bradley 1747-AENTR SLC 500 EtherNet/IP Adapter Overview

The 1747-AENTR serves as a critical bridge for industrial modernization, acting as an EtherNet/IP Adapter Module for the SLC 500 series. This module is specifically engineered to facilitate the migration of legacy SLC I/O to high-performance Logix platforms. By replacing the original SLC 500 processor in Slot 0, the 1747-AENTR transforms a standard chassis into a distributed I/O station controlled by a Master processor. We recommend downloading the latest 1747-AENTR AOP for seamless integration in Studio 5000.

Technical Specifications

Manufacturer: Rockwell Automation / Allen-Bradley
Model: 1747-AENTR
Series: SLC 500
Module Type: EtherNet/IP Adapter / Gateway
Communication Ports: Two (2) RJ-45 (Integrated Switch)
Speed: 10/100 Mbps (Full or Half Duplex)
Topologies: Star, Tree, Linear, and DLR (Ring)
Installation: **Slot 0** (Replaces SLC CPU)
Backplane Draw: 470 mA @ 5V DC
Thermal Dissipation: 2.49 Watts (8.5 BTU/hr)
Isolation Voltage: 50V Continuous
Operating Temp: 0 to 60 °C (32 to 140 °F)

Global PLC Spare HUB's Insight

The 1747-AENTR is the "silver bullet" for avoiding costly full-system rip-and-replace projects. Our engineering team highlights that the "R" designation is vital for modern plant floor resiliency; it allows the module to participate in a Device Level Ring (DLR), ensuring that a single cable break won't crash your I/O rack. Unlike older remote adapters, the 1747-AENTR leverages standard CIP messaging, allowing for deep diagnostic integration. It essentially grants a second life to your existing 1746 I/O hardware investment.

Application & Diagnostic Capabilities

Phased Migration: Replace SLC processors with the 1747-AENTR to upgrade control while keeping wiring intact.
Distributed I/O: Turn any SLC chassis into a remote rack over an EtherNet/IP backbone.
Diagnostic Ability: CIP server functionality provides real-time health and I/O status to the Master controller.
Flexible Networking: Dual ports eliminate the need for external switches in daisy-chain configurations.

Shipping & Warranty

Dispatch Time: Orders for the 1747-AENTR ship within 24-48 hours.
Global Logistics: Expedited worldwide delivery via FedEx, UPS, and DHL.
Warranty Terms: Includes a comprehensive 12-month technical warranty.
Package List: One 1747-AENTR Module and technical safety documentation.

Frequently Asked Questions (FAQ)

Can I use the 1747-AENTR in any slot of the SLC chassis?

No. The 1747-AENTR must be installed in **Slot 0**, as it takes over backplane management duties from the original SLC processor.

Does this module require a separate IP address for each port?

No. The two ports function as an embedded switch; the module and I/O rack share a single IP address.

Is it possible to configure the 1747-AENTR via BOOTP/DHCP?

Yes. The module is shipped with DHCP enabled by default. Use the Rockwell BOOTP Utility to assign a static IP.

What is the maximum number of SLC I/O racks per processor?

This is limited by your Logix controller's Ethernet nodes and bandwidth, but the module supports full 3-chassis expansion.

How do I troubleshoot communication drops in a DLR configuration?

Check the Link LEDs. In DLR, if one link is down but communication continues, the ring has "wrapped" due to a cable fault.

Purchasing & Maintenance Guide

Confirm your 1746 power supply can provide the 470mA required on the 5V rail for this gateway.
If your architecture uses linear or ring topology, the "R" version (this module) is mandatory for link redundancy.
Verify the firmware version of your Logix controller to ensure the 1747-AENTR AOP is fully compatible.

PDF

Download PDF

Q: Are these parts 100% original and new?

A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.

Q: How fast is the shipping to my country?

A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.

Q: Can I get a formal quotation with shipping costs?

A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.

Q: Do you offer discounts for bulk orders?

A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.

12-Month Comprehensive Warranty

Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.

Coverage: Functional defects and hardware failures under normal operating conditions.
Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.

Returns & Exchange Policy

We offer a 30-day return policy to ensure you receive the exact part your system requires.

Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.

Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.