UT35A-000-10-00 Yokogawa UTAdvanced Digital Indicating Controller 1/4 DIN

Technical Architecture: Yokogawa UT35A-000-10-00

Engineered within the Yokogawa UTAdvanced series, the UT35A-000-10-00 is a high-precision 1/4 DIN Digital Indicating Controller designed for thermal processing, industrial furnaces, and closed-loop process regulation. Featuring an ultra-compact 65 mm behind-panel depth, it fits shallow control cabinets while providing a high-visibility 14-segment active color LCD that shifts color during alarm states. Built-in ladder sequence logic allows engineers to execute auxiliary interlocking directly inside the controller without external micro-PLCs.

Model Suffix & Configuration Breakdown

• Base Model: UT35A — 1/4 DIN Universal Digital Indicating Controller (UTAdvanced Series)
  • Type 1 (Basic Control): -0 = Standard Control Type (Single-loop PID, ON/OFF, Heating/Cooling)
  • Type 2 (Optional Functions): 0 = None (Standard Base I/O Configuration)
  • Type 3 (Open Networks): 0 = None (No Fieldbus Card Installed)
  • Display Language: -1 = English Interface & Parameter Prompts
  • Case Color: 0 = White (Light Gray Industrial Bezel)
  • Fixed Suffix Code: -00 = Standard Factory Designation

Hardware & Control Matrix

Commercial & Logistics Terms

• Warranty Coverage: Backed by a full 12-month warranty covering factory workmanship and electronic component integrity.
• Global Express Dispatch: Fast international air freight via DHL, FedEx, and UPS with full tracking visibility.

Application Engineer FAQ & Selection Guide

Q1: How do I determine if the UT35A-000-10-00 suffix meets my SCADA communication requirements?

The UT35A-000-10-00 specifies Type 2 = 0 and Type 3 = 0, meaning it operates as a standalone controller without RS-485, Ethernet, or fieldbus modules (such as PROFIBUS-DP or CC-Link). Select this exact configuration for local panel loops that do not require supervisory PLC polling.

Q2: What wiring precautions prevent measurement drift when connecting low-level mV or Thermocouple signals?

Route thermocouple extension wires and mV lines in dedicated grounded conduits separated from 100–240V AC power lines and contactor coils. Enable the internal digital input filter and verify cold-junction compensation terminals remain free from cabinet fan drafts.

Q3: How does the built-in ladder sequence function save panel space in OEM skid designs?

Engineers can program simple start/stop interlocks, soak timers, and alarm latching directly inside the UT35A using Yokogawa LL50A Parameter Setting Software. This eliminates external timing relays and auxiliary logic modules inside compact enclosures.

Q4: What steps ensure the front panel maintains its IP66 washdown rating after installation?

Verify that the panel cutout is free of burrs, seat the rubber packing gasket evenly behind the bezel, and tighten the top and bottom mounting brackets symmetrically until the gasket compresses uniformly without warping the housing.

Q5: Should I choose relay output or voltage pulse output when driving high-frequency electric heaters?

For rapid proportional time-cycling (cycle times under 10 seconds), configure the controller for voltage pulse output driving an external Solid-State Relay (SSR). Reserve the mechanical relay output for slow-cycling alarms or contactor actuation to avoid premature contact wear.

Tags