UM33A-000-11 Process Monitor | Yokogawa UTAdvanced 1/8 DIN Indicator

Engineering Summary & Operational Role

The Yokogawa UM33A-000-11 is a compact 1/8 DIN digital process indicator engineered within the UTAdvanced series. It continuously monitors critical industrial parameters including temperature, pressure, and volumetric flow rates. Featuring a high-contrast 14-segment active color LCD, the unit transitions process value digits from white to red during alarm events for immediate operator recognition on dense control panels.

Model Suffix & Configuration Breakdown

• Base Model: UM33A — 1/8 DIN Digital Indicator with Alarm Functions
  • Basic Code (-0): Standard type configuration (100–240 V AC power supply)
  • Additional Functions (0): None (Base hardware specification)
  • Open Networks (0): None (Standalone local indication and alarm control)
  • Display Language (-1): English default menu guide (User-switchable to German, French, or Spanish)
  • Case Color (1): Black / Light charcoal gray polycarbonate housing

Technical Architecture & I/O Specifications

Panel Integration & Mounting Constraints

• Cut a precise 92 mm (W) × 45 mm (H) rectangular opening in the control cabinet door to maintain the IP66 front seal.
• Maintain a shallow rear clearance of 65 mm behind the panel face, allowing extra space for terminal lug bending radii.
• Install the UM33A-000-11 horizontally or tilted upward up to 30 degrees maximum; downward tilting is strictly prohibited to prevent heat accumulation.
• Terminate all signal and 100–240 V AC power leads onto the M3 screw terminals using ring or fork lugs suited for square washers.

Supply Chain, Warranty & Logistics

• Warranty Coverage: Backed by a comprehensive 12-month operational warranty against manufacturing and functional defects.
• Global Dispatch: Rapid international fulfillment via FedEx, UPS, and DHL express air freight with full tracking visibility.

Technical FAQ & Selection Guidance

Q: How does the shared retransmission and loop power output affect two-wire transmitter wiring?

A: The UM33A-000-11 shares its single analog output hardware between 4–20 mA retransmission and the 15 V DC sensor power supply. If your field transmitter requires internal loop excitation from this unit, you cannot simultaneously use the analog retransmission signal to feed a downstream PLC.

Q: Why does the specification list two discrete contact inputs alongside the universal analog input?

A: Those two no-voltage or transistor contact inputs allow operators to trigger remote functions such as peak/bottom hold resets, alarm latch clearances, or display mode switching directly from external panel pushbuttons.

Q: Can I add RS-485 Modbus communication to this specific part number later?

A: No. The middle zeros in UM33A-000-11 indicate that open network and communication hardware boards are omitted at the factory. If your architecture requires Modbus/RTU or CC-Link integration, specify a different suffix code prior to ordering.

Q: What makes the Alarm-4 output different from Alarms 1 through 3 during safety interlock wiring?

A: Alarms 1, 2, and 3 provide Form-A (1a) normally open contacts with independent commons, whereas Alarm-4 offers a Form-C (1c) changeover contact, making Alarm-4 ideal for fail-safe de-energize-to-trip annunciator circuits.

Q: How should engineers select between the 50 ms and 200 ms sampling periods during commissioning?

A: Use the 50 ms fast scan rate for rapid pressure spikes or dynamic flow monitoring, and select 200 ms for slow thermal loops to maximize 50/60 Hz power-line noise rejection.

Tags