IMDSI13 ABB INFI 90 Digital Slave Input Module | 16-Ch 24VDC
Manufacturer: ABB
Product No.: IMDSI13
Condition: In stock
Product Type: Digital Slave Input Module
Product Origin: USA
Payment: T/T, Western Union
Weight: 500g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Control Architecture & Functional Role
The ABB IMDSI13 is a 16-channel digital slave input module built for distributed control racks within the Bailey Net 90, INFI 90, and Harmony automation architectures. Interfacing directly via the I/O expander bus, the IMDSI13 acquires passive field contact states and transfers discrete process telemetry to host Multi-Function Processors (MFP) or Logic Master Modules (LMM). Engineered with fixed hardware input conditioning and zero onboard jumper configuration, it streamlines panel commissioning while providing a direct 24 VDC functional replacement path for legacy IMDSI02 assemblies.
Electrical & Environmental Specification Matrix
| Engineering Parameter | Technical Specification |
|---|---|
| Manufacturer & Series | ABB — Bailey Net 90 / INFI 90 / Harmony Rack |
| Module Designation | IMDSI13 (Digital Slave Input Module) |
| Channel Density & Bus Interface | 16 independent discrete input channels; polled via I/O Expander Bus (MFP / LMM) |
| Nominal Input Rating | 24 VDC (+10% tolerance) at 5.5 mA nominal loop current |
| Switching Thresholds | Turn-on (min): 16.8 VDC | Turn-off (max): 13.0 VDC |
| Threshold & Leakage Limits | Min turn-on current: 4 mA at 14.7 VDC | Max off-leakage: 7 μA (Vin ≤ 12 VDC) |
| Input Conditioning & Overvoltage | Fixed factory debounce (no user jumpers); Overvoltage Category II (IEC 1010-1) |
| Backplane Power Draw | 95 mA typical at 5 VDC; 115 mA maximum |
| Rack Form Factor | Occupies 1 standard slot in an INFI 90 OPEN Module Mounting Unit (IEMMU) |
| Operating Temperature Window | 0°C to 70°C (32°F to 158°F) internal cabinet rating (IEC 68-2-1, 2, 14) |
| Relative Humidity & Altitude | 5%–95% up to 55°C; 5%–45% at 70°C (noncondensing); Sea level to 3 km |
| Air Quality & Pollution Rating | ISA S71.04 Class LA, LB, LC Level 1 (noncorrosive); Pollution Degree 1 |
Rack Installation & Field Commissioning
- Verify Backplane Power Capacity: Confirm the IEMMU 5 VDC power supply accommodates the 115 mA maximum draw per IMDSI13 card.
- Inspect Slot Dipswitches: Set slave module address dipswitches prior to insertion, noting that the board contains no physical debounce jumpers.
- Seat Module into IEMMU: Align the PCB edges with the designated INFI 90 OPEN card guides and lock the front faceplate latches firmly.
- Verify Field Termination: Confirm 24 VDC field wetting voltage across the associated termination unit (TU) and validate logic states inside the host MFP/LMM database.
Field Diagnostics & Maintenance Insights
- Leakage Current Immunity: The 7 μA maximum off-state leakage tolerance prevents false logic-high triggers from two-wire proximity switches or long parallel cable runs.
- Zero-Jumper Reliability: Eliminating mechanical debounce jumpers removes oxidation failure points in high-humidity or elevated-temperature cabinets.
- Thermal Derating Awareness: Maintain cabinet humidity below 45% noncondensing whenever internal enclosure temperatures approach the 70°C upper threshold.
Compatibility & Migration Guidelines
- Legacy Replacement Path: Serves as a direct functional upgrade for older IMDSI02 modules in existing 24 VDC field circuits, provided system logic does not require custom jumper-selectable debounce intervals.
- Controller Interoperability: Fully supported across Bailey Net 90, INFI 90, and Harmony racks managed by MFP or LMM processors.
Package Contents
- 1 × ABB IMDSI13 16-Channel Digital Slave Input Module
- Anti-static protective packaging
Frequently Asked Questions (FAQ)
Q1: What critical hardware difference must engineers check before replacing an IMDSI02 with the IMDSI13?
A1: Verify that your field circuits operate exclusively at 24 VDC and that your process logic does not depend on hardware-adjustable debounce jumpers, as the IMDSI13 has no user-configurable jumpers.
Q2: Why might a 24 VDC field contact fail to register a clean logic transition on this module?
A2: Voltage drop across long field wiring can pull the signal below the 16.8 VDC minimum turn-on threshold; measure terminal voltage under load to ensure at least 4 mA flows at 14.7 VDC or higher.
Q3: How does the 13 VDC maximum turn-off specification protect against induced AC noise on field cables?
A3: The 3.8 VDC hysteresis band between the 16.8 VDC turn-on and 13 VDC turn-off thresholds prevents rapid contact chatter caused by electromagnetic induction in crowded cable trays.
Q4: Can this module be installed in cabinets located in corrosive chemical processing areas?
A4: The IMDSI13 is rated for ISA S71.04 Class LA, LB, LC Level 1 noncorrosive environments, so cabinets in harsh chemical zones require positive-pressure air purging or chemical filtration.
Q5: Does the IMDSI13 require external termination units to connect field wiring?
A5: Yes, like all INFI 90 OPEN rack I/O cards, field wires terminate onto a compatible rear or remote Termination Unit (TU) linked via standard ribbon cables.

Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.



