IC695CEP001 GE Fanuc RX3i PROFINET Carrier Module

Product Introduction

The GE Fanuc IC695CEP001 coordinates high-speed remote I/O data across decentralized industrial networks. This compact RX3i PacSystem PROFINET CEP carrier connects field modules directly to a central supervisor controller. It establishes a rugged copper Ethernet communication infrastructure for distributed machinery. Automation engineers deploy this interface to achieve deterministic data synchronization. The slim hardware frame saves valuable footprint space inside packed distribution enclosures.

Technical Specifications

• Brand: GE Fanuc / GE Intelligent Platforms
• Model: IC695CEP001
• Series: RX3i PacSystem Automation Infrastructure
• Module Type: Remote PROFINET CEP Carrier Block
• Ethernet Interface: Dual RJ-45 10/100 Base-TX copper receptacles
• PROFINET Compliance: Supported PROFINET version 2.3 (Class A specification)
• Input Voltage Range: 19.2 to 30 Volts DC operational window
• Nominal Power Consumption: 5.25 Watts (0.22 Amps at 24 VDC nominal)
• Station Module Capacity: Accommodates exactly 1 I/O module per carrier station
• Station I/O Allocation: 1024 bytes maximum total data per remote station
• Input Mapping Threshold: 512 bytes maximum allocated for input variables
• Output Mapping Threshold: 512 bytes maximum allocated for output variables
• Integrated Bit Registers: Provides 32 input status bits and 32 output control bits
• Local Maintenance Interface: 1 USB 2.0 compliant Micro-B connector port
• Physical Unit Dimensions: 177.2 x 51 x 35 mm (7 x 2 x 1.3 inches)
• Operating Ambient Temperature: 0 to 60 degrees Celsius operational range

Global PLC Spare HUB's Insight

Our distributed automation engineers inspected the architecture of the IC695CEP001 remote node device. This network tool facilitates the deployment of isolated single-slot I/O clusters without installing full-sized multi-slot sub-racks. Because it includes dual RJ-45 copper receptacles, it enables flexible line or ring network topologies directly on the factory floor. It operates efficiently within the high-speed I/O LAN layer. This setup ensures that decentralized field components communicate with near-zero transmission latency.

Suitable Equipment

• GE Fanuc RX3i PacSystem PROFINET Controller Modules
• RX3i compatible discrete and analog standalone I/O modules
• Proficy Machine Edition engineering software configurations
• Industrial shielded twisted-pair Cat5e/Cat6 network patch leads
• Regulated 24V DC industrial control power supply units

Target Application Scenarios

• Decentralized conveyor routing sensor aggregation nodes
• Remote water processing facility pump monitoring stations
• Skid-mounted manufacturing apparatus standalone control interfaces
• Localized HVAC air handler digital data integration loops
• Automotive manufacturing line localized safety interlock tracking

Diagnostic Capabilities

The IC695CEP001 utilizes specialized firmware sub-routines to execute advanced remote node module scanning. It intercepts field-side faults and reports status anomalies directly through the 32 integrated input status bits. The dual Ethernet ports provide link verification and speed indicators to isolate physical cabling damage immediately. Technicians execute deep real-time hardware tracking or upload firmware updates quickly by connecting via the front Micro-B USB port.

FAQ

Which minimum software revision is required to configure this PROFINET carrier?

You must use Proficy Machine Edition version 8.0 SIM 5 or later to configure the hardware properties.

Can a single carrier module support multiple expansion I/O blocks concurrently?

No, this specific CEP carrier station supports exactly one single I/O module per station setup.

What specific function do the 32 input status bits serve during operation?

They continuously transmit carrier health parameters and internal module error states to the master CPU controller.

Is the front-facing Micro-B USB port used for active runtime communication?

No, the Micro-B interface is dedicated exclusively to performing local hardware firmware upgrades and diagnostics.

What happens if the field input power drops below 19.2 Volts DC?

The unit undergoes an under-voltage shutdown routine and reports a communication fault to the main controller.

Selection & Buying Guide

• Verify that your network master module supports PROFINET version 2.3 Class A operations.
• Ensure your decentralized node requires only a single I/O block expansion before ordering.
• Calculate the total byte load to ensure data fits within the 512-byte input/output constraints.
• Check that your 24V DC field electrical lines match the 19.2 to 30 Volts operational window.

Package List & Warranty

• 1 x GE Fanuc IC695CEP001 PROFINET CEP Carrier Assembly
• Factory Shielded Component Installation Manual Sheet
• 12-Month Comprehensive Global Warranty Protection Policy

Shipping & Logistics

• We dispatch all active in-stock item orders within 24 to 48 hours.
• Our logistical partners utilize premium express couriers: FedEx, UPS, and DHL.
• We send tracking update notifications to your email immediately upon freight departure.
• Every package features heavy-duty industrial cushioning to safeguard internal electronics.

Tags