GE IS200TVIBH2BBB Mark VI Turbine Vibration Input Termination Board

IS200TVIBH2BBB General Electric Mark VI Turbine Vibration Terminal Board

The General Electric IS200TVIBH2BBB is a high-performance vibration input termination module. Engineered specifically for the Speedtronic Mark VI control system, this board interfaces directly with rotating machinery sensors. It handles up to fourteen Bently Nevada vibration probes simultaneously. The board routes dynamic signals to the corresponding VVIB processor card via the VME backplane. This streamlined design ensures precise, real-time diagnostic monitoring across heavy-duty industrial applications.

This dynamic hardware features dual-stage voltage regulation. It safely distributes stable excitation power to connected field sensors. The terminal board operates reliably within an extended temperature envelope of -30°C to +65°C. It represents a vital physical layer component for industrial turbine protection networks. High-speed signal isolation and built-in short-circuit protection keep critical control systems safe from field wiring faults.

We supply this authentic component in its original, factory-sealed packaging. It comes complete with a comprehensive 12-month technical warranty.

Global PLC Spare HUB's Insight

From an instrumentation and engineering perspective, the GE IS200TVIBH2BBB is a masterclass in turbine signal conditioning. It serves as the primary barrier between harsh physical field environments and sensitive VVIB digital processing cards. One of its standout design elements is the integrated diode high-select circuit. In TMR (Triple Modular Redundant) applications, this circuit automatically selects the strongest -28 V DC supply line. This feature prevents power interruption if a power supply drops out. Field engineers will appreciate the onboard BNC utility connections. These ports allow direct hookups for dynamic signal analyzers without disconnecting permanent terminal wiring. This makes real-time troubleshooting fast and safe.

Module Hardware Anatomy

• Physical Footprint: Standard compact form factor measuring 23.8 cm (height) by 8.6 cm (width).
• High-Density Terminal Blocks: Two heavy-duty barrier strip blocks line the outer board edge.
  • Connection Interface: Features numbered screw clamp connectors arranged in a dual-line layout.
  • Field Probe Support: Designed to directly terminate up to fourteen Bently Nevada sensor cables.
• Excitation Power Distribution: Receives -28 V DC system power and converts it to stabilized probe voltage.
  • Regulated Range: Onboard low-noise regulators deliver dedicated -23 V DC to -26 V DC excitation power.
  • Short Circuit Protection: Built-in thermal shutoff limits current during field wiring faults.
• Analog Utility Interfacing: Equipped with dual multi-pin female D-shell connectors and onboard jumper switches.
  • Jumper Arrays: Dual-row center jumper switches allow physical routing adjustments of probe signals.
  • Passive Filtering: High-grade inductors and capacitors suppress high-frequency line noise.

Diagnostic Capabilities & System Compatibility

The IS200TVIBH2BBB is a crucial hardware element for advanced mechanical monitoring and predictive maintenance strategies.

Primary Diagnostic Capabilities:

• Continuous monitoring of radial shaft vibration to detect rotor unbalance, structural misalignment, or oil whirl.
• Real-time axial thrust position measurements to protect critical thrust bearings from catastrophic wear.
• Rotor eccentricity measurements during low-speed turbine startup and shutdown cycles.
• Precise phase angle reference measurements when paired with a permanent Keyphasor sensor.

Compatible Machinery & Equipment:

• Heavy-duty utility gas turbines (GE Frame 6, 7, and 9 systems) run by Mark VI controllers.
• Industrial steam turbines used in power generation and mechanical drive setups.
• High-speed centrifugal compressors and process air blowers.
• Large utility induction motors and high-voltage synchronous generators.

Technical Specifications Table

Commercial Terms & Global Shipping

• Item Condition: Brand new and original in factory-sealed box.
• Warranty Terms: Covered by our 12-month replacement warranty.
• Dispatch Speed: Rapid processing, with shipments leaving our warehouse within 24 to 48 hours.
• Express Couriers: Fast global shipping via FedEx, UPS, or DHL.

Professional Frequently Asked Questions (FAQ)

Question: How does the TVIB board coordinate with the VVIB board in a Mark VI system?

Answer: The TVIB acts as the physical termination layer where up to 14 field probes are landed. It routes these dynamic signals to the VVIB card, which performs high-speed analog-to-digital conversion and transmits the data over the VME bus to the controller.

Question: What is the purpose of the center-mounted jumper switch array on the board?

Answer: These hardware jumpers allow engineers to configure specific circuit routing. This includes setting sensor grounding, selecting probe types, and adjusting signal pathways for different monitoring needs.

Question: Can I plug a portable data collector into this board while the turbine is running?

Answer: Yes, the onboard BNC connectors are fully isolated. They let you connect dynamic signal analyzers or portable vibration instruments for diagnostics without risking system trips or interrupting the controller.

Question: How does the short-circuit protection on the excitation outputs work?

Answer: Each of the probe excitation outputs is equipped with an individual linear regulator. If a field wiring fault occurs, the regulator limits the fault current, keeping the other channels running smoothly.

Question: Are there any rotational speed limitations to be aware of during configuration?

Answer: Yes. Speed limits depend on the specific VVIB and controller sampling frequencies. For high-speed applications or overspeed protection, please refer to the specific GE turbine manual for proper limits.

Strategic Selection & Purchase Guide

Before purchasing the GE IS200TVIBH2BBB, confirm your controller version. This module is built specifically for the Mark VI Speedtronic platform and will not work with legacy Mark V or newer Mark VIe systems. Check the model suffix carefully; the "H2BBB" designation indicates a specific hardware revision with unique terminal configurations and component layouts.

Make sure to review your system's redundancy setup. In TMR setups, confirm that your power supply modules are set to deliver a stable -28 V DC input. This is necessary to properly activate the board's high-select diode circuit and ensure uninterrupted backup power.

Tags