GE Emerson IC698PSA350 RX7i AC/DC Power Module

Product Introduction

• The IC698PSA350 is a high-capacity power supply module designed for the PACSystem RX7i controller platform.
• It provides critical backplane power for internal circuitry, ensuring all modules in the rack remain operational.
• Occupying a single slot, the IC698PSA350 is engineered for exclusive installation in Slot 0 (the leftmost slot) of the RX7i rack.
  

Global PLC Spare HUB's Insight

• The IC698PSA350 stands out for its 350W output capacity and high-current 5V rail (60A), making it the standard for fully-loaded RX7i racks.
• Its 0.99 power factor correction significantly improves energy efficiency and reduces heat generation in industrial cabinets.
  

Technical Specifications

• Brand: GE Fanuc / Emerson
• Model: IC698PSA350
• Series: PACSystem RX7i
• Input Voltage Range: 85 to 264 VAC (Universal) or 100-150 VDC
• Input Frequency: 47-63 Hz
• Total Output Power: 350 Watts
• DC Output Rails:
  • +5.1 VDC: 0 to 60 Amperes
  • +12 VDC: 0 to 12 Amperes
  • -12 VDC: 0 to 4 Amperes
• Input Power (Typical/Max): 437 Watts / 500 Watts
• Ride-Through Time: 15 ms minimum (protection against power dips)
• Hold-Up Time: 5 ms minimum
• Operating Temperature: 0 to 60 degrees Celsius
• Isolation: 1500 Volts DC (Input to Output)

Application Scenarios & Device Compatibility

• Central power distribution for PACSystem RX7i universal backplanes.
• High-density I/O configurations requiring significant +5V logic power.
• Energy and utility sectors utilizing 125VDC station power.
• Compatible with all IC698 series processors and communication modules.

Diagnostic & Protection Capabilities

• Status Indicators: Front-panel LEDs for Field OK, Output OK, and OVER TEMP.
• Airflow Protection: Built-in sensor detects cessation of 70 CFM forced air cooling.
• Thermal Safety: Automatic shutdown logic paired with the Over-Temperature LED.
• Electrical Safeguards: Integrated overvoltage and overcurrent protection on all three DC output rails.

Package List and Warranty

• 1 x GE Fanuc IC698PSA350 Power Supply Module
• Anti-static protective housing
• Warranty: Industry-leading 12-month replacement guarantee

Shipping and Logistics

• Courier Partners: Global express delivery via FedEx, UPS, and DHL.
• Dispatch Time: Ready-to-ship units are dispatched within 24-48 hours.
• In-Transit Security: Professional industrial-grade packaging to prevent vibration damage.

Professional FAQ

• What is the physical difference between Series A and Series B of the IC698PSA350? The internal fuse architecture changed; Series A uses 0.25” x 1.25” fuses, while Series B uses 5 x 20 mm fuses. The electrical performance remains identical.
• Can I install the IC698PSA350 in any slot of the RX7i rack? No, this module is specifically designed for Slot 0 only to ensure proper electrical distribution through the backplane.
• What causes the "OVER TEMP" LED to activate? This usually indicates an airflow failure (fan tray malfunction) or an ambient temperature exceeding 60°C. Check the airflow sensor jumper if no fan is present.
• Does this module support redundant power configurations? The IC698PSA350 is a high-capacity supply; redundancy depends on the specific RX7i backplane and chassis configuration used.
• Can this unit handle both AC and DC input simultaneously? It is designed for either AC (85-264V) or DC (100-150V) input. Consult the wiring diagram on the front of the module for terminal assignments.

Purchasing Guide

• Always verify your total rack load; if your 5V requirement is near 60A, the IC698PSA350 is the required choice over lower-wattage modules.
• Ensure your 12 AWG ground wire is ready for installation to meet safety and EMC standards.
• Confirm whether your application requires the airflow sensor enabled (standard for forced-air racks).
• Contact our technical support for compatibility verification with legacy GE Fanuc 90-70 components.

Tags