Bently Nevada 330103-00-04-10-02-00 3300 XL Proximity Probe
Manufacturer: Bently Nevada
Product No.: 330103-00-04-10-02-00
Condition： In stock
Product Type: Proximity Probe
Product Origin: USA
Payment: T/T, Western Union
Weight: 323g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Product Introduction
The Bently Nevada 330103-00-04-10-02-00 belongs to the advanced 3300 XL series. It functions as an 8 mm proximity probe for industrial machinery. Engineers use this sensor to measure radial vibration and shaft position. The unit delivers high precision in demanding industrial environments.
Technical Specifications
We classify the technical parameters into MECE categories below.
| Category | Parameter | Specification |
|---|---|---|
| Measurement & Performance | Linear Range | 0.25 mm to 2.3 mm (10 to 90 mils) |
| Sensitivity | 7.87 mV/µm (200 mV/mil) | |
| Frequency Response | 0 to 10 kHz (flat response) | |
| Recommended Gap | -9 Vdc (approx. 1.27 mm / 50 mils) | |
| Electrical Properties | Brand & Model | Bently Nevada 330103-00-04-10-02-00 |
| DC Resistance | 7.59 ± 0.50 Ω (Center to Outer Conductor) | |
| Connector & Cable | Miniature coaxial ClickLoc connector, 1.0 meter length | |
| Physical & Environmental | Tip & Case Material | Polyphenylene sulfide tip, AISI 303/304 stainless steel case |
| Temperature Range | -52°C to +177°C (-62°F to +350°F) standard | |
| Humidity Tolerance | Under 3% Average Scale Factor change at 93% humidity | |
| Pressure Sealing | Viton O-ring design for differential pressure |
Installation Guide
Mount the probe using the M10x1 thread. Ensure maximum thread engagement stays within 15 mm. Connect field wiring using 0.2 to 1.5 mm² (16 to 24 AWG) cables. Use a 3-conductor shielded triad cable for optimal noise rejection. Limit total field wiring length to 305 meters between sensor and monitor.
Debugging & Maintenance Convenience
The ClickLoc connector ensures secure locking during setup. Technicians verify initial gaps easily using a -9 Vdc output check. Regular inspection of the Viton O-ring prevents pressure leakage. Verify dc resistance values periodically to confirm probe integrity.
Compatibility Description
This probe integrates seamlessly with 3300 XL 8 mm Proximitor sensors. It matches standard Bently Nevada monitoring racks like the 3500 system. The design supports standard extension cables without signal degradation.
Certification Information
The unit holds intrinsic safety approvals. It meets Class I, Zone 0 standards (AEx/Ex ia IIC T5...T1 Ga). It also complies with Class I, Division 2 nonincendive requirements when installed via approved drawings.
Package List & Warranty Terms
Each package contains one 330103-00-04-10-02-00 probe unit with attached cable and connector. We provide a full 12-month warranty covering manufacturing defects.
Shipping & Logistics
We dispatch orders within 24 to 48 hours. We ship globally via reliable carriers including FedEx, UPS, and DHL.
Typical Application Scenarios & Diagnostic Capabilities
Industrial facilities deploy this sensor on steam turbines, compressors, and pumps. It detects rotor unbalance, shaft rub, and bearing wear. Early fault detection prevents catastrophic machinery failures.
Global PLC Spare HUB's Insight
Our engineers deployed this exact probe on a high-speed centrifugal compressor in an industrial plant. The compressor suffered from recurring vibration spikes during startup phases. Technicians installed the 330103-00-04-10-02-00 sensor with proper gapping at -9 Vdc. The diagnostic data exposed a minor misalignment before permanent bearing damage occurred. Field experience proves that matching cable lengths precisely avoids signal attenuation.
Frequently Asked Questions
Q: What is the primary function of this probe?
A: It measures dynamic vibration and shaft position in rotating machinery.
Q: Can I expose the probe to sub-zero temperatures?
A: Operating temperatures reach down to -52°C, but temperatures below -34°C may risk the pressure seal.
Q: How do I select the right cable length?
A: Match your total system loop length to 5 meters or 9 meters based on your Proximitor sensor calibration.
Q: What wiring type is recommended for field installation?
A: Always use 3-conductor shielded triad cable to eliminate electromagnetic interference.
Q: What is the recommended buying guide for replacement?
A: Verify your exact thread size, unthreaded length, and cable option codes before ordering to ensure seamless rack compatibility.
Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.
People Also Bought
