ABB PHARPS32000000 Power Supply Module | Bailey MPS III System

Manufacturer: ABB
Product No.: PHARPS32000000
Condition： In stock
Product Type: Power Supply Module
Product Origin: SE
Payment: T/T, Western Union
Weight: 1500g
Shipping port: Xiamen
Warranty: 12 months

Quantity

Selected quantity: 1

Estimate delivery times: 12-26 days (International), 3-6 days (United States).

Return within 30 days of purchase. Duties & taxes are non-refundable.

Guaranteed Safe Checkout

Product Overview

The ABB PHARPS32000000 (also designated as P-HA-RPS-32000000) serves as a primary modular power unit for ABB Bailey Infi 90 and Symphony Harmony control architectures. Engineers deploy this MPS III power supply module to convert universal AC mains into regulated multi-rail DC power. It supports high-density logic racks, analog I/O modules, and field termination assemblies in continuous process control environments.

The unit accepts wide-range 90–264V AC input and delivers up to 320W of continuous output power. Built-in over-voltage, over-current, and short-circuit protections safeguard downstream rack electronics against electrical faults.

Technical Specifications

Manufacturer / Brand	ABB (Bailey Controls)
Model / Part Number	PHARPS32000000 / P-HA-RPS-32000000
System Series	MPS III / Bailey Infi 90 / Harmony Rack
Input Voltage & Measurement Range	90–264V AC (Nominal 120/240V AC), 11.5A max input current, 1150VA
Frequency Response	47–63 Hz auto-sensing line frequency
DC Output Rails & Capacity	+5V DC @ 60A; +15V DC @ 3A; -15V DC @ 3A; +24V DC @ 17A (Optional 48V DC configuration)
Continuous Power Rating	320W continuous total output
Regulation Linearity & Sensitivity	High-precision line and load regulation maintains tight DC bus tolerances across dynamic rack loads.
Ripple & Noise Resolution	Low-ripple switching topology isolates sensitive analog I/O signals from high-frequency switching noise.
Operating Temperature Range	-20°C to +70°C (-4°F to +158°F)
Environmental Tolerance	Industrial cabinet rating resistant to continuous thermal cycling and standard plant humidity levels.
EMI / RFI Immunity	Integrated input line filtering suppresses electromagnetic interference and transient voltage surges.
Physical Dimensions & Weight	228.6 mm x 330.2 mm x 635 mm (D x H x W); Net Weight: 5.9 kg (13 lbs)

Installation & Commissioning Guidelines

Rack Mounting Architecture:
- Slide the PHARPS32000000 chassis directly into the dedicated MPS III power entry slot within the Harmony or Infi 90 cabinet.
- Align the rear blind-mate backplane connectors firmly before tightening the front retaining screws.
Wiring & Grounding:
- Connect the 90–264V AC feed using properly rated copper conductors and verify earth ground continuity.
- Maintain physical separation between high-voltage AC input cables and low-voltage DC bus bars.
Commissioning & Maintenance Convenience:
- Front-panel LED indicators display real-time health status for each individual DC output rail.
- Accessible front test points let technicians verify rail voltages with a multimeter without removing the module.
- Modular hot-swap capability in redundant MPS III configurations reduces mean time to repair (MTTR).

System Compatibility & Certifications

Controller Compatibility	ABB Bailey Infi 90, Net 90, and Symphony Harmony process control racks.
Power Bus Integration	Interoperates with MPS III modular power distribution backplanes and redundant diode auctioneering assemblies.
Safety & Regulatory Certifications	UL Listed and CE Marked for industrial control equipment compliance.
Circuit Protection Standards	Built-in Over-Voltage Protection (OVP), Over-Current Protection (OCP), and Short-Circuit Protection (SCP).

Package Contents

1 x ABB PHARPS32000000 (P-HA-RPS-32000000) MPS III Power Supply Module
1 x Factory Inspection & Test Verification Sheet
1 x Protective Anti-Static Packaging & Foam Insert

Selection Guide & Frequently Asked Questions (FAQ)

How do I confirm if my rack requires the standard or 48V DC option?

Check your cabinet bill of materials and field I/O termination units. Standard Infi 90 logic and transmitter loops utilize the +5V, ±15V, and +24V DC rails, whereas specialized high-voltage contact wetting circuits require the 48V DC variant.

Can I run two PHARPS32000000 modules in parallel for N+1 redundancy?

Yes, the MPS III architecture supports N+1 redundant configurations. Install both modules into adjacent slots connected via the system load-sharing and diode isolation backplane to ensure uninterrupted failover.

What is the difference between PHARPS32000000 and P-HA-RPS-32000000?

Both codes identify the exact same ABB hardware unit. PHARPS32000000 serves as the unhyphenated ERP catalog number, while P-HA-RPS-32000000 appears on legacy Bailey hardware labels and engineering drawings.

How should field engineers troubleshoot a tripped output rail during commissioning?

Disconnect the downstream rack bus bars and measure the unloaded voltages at the front test points. If all rails normalize within tolerance, inspect the I/O modules for a localized short circuit.

12-Month Comprehensive Warranty

Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.

Coverage: Functional defects and hardware failures under normal operating conditions.
Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.

Returns & Exchange Policy

We offer a 30-day return policy to ensure you receive the exact part your system requires.

Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.

Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.