330905-08-13-10-02-05 Bently Nevada 3300 NSv M10 Sensor Probe

Product Overview

The Bently Nevada 3300 NSv 330905-08-13-10-02-05 proximity probe delivers precise, non-contact shaft vibration and position measurements. Designed for tight-clearance industrial environments, this eddy current sensor features superior side-view suppression and enhanced chemical resistance. It directly replaces legacy 3300 RAM probes, providing reliable machine protection for process compressors and fluid-film bearing machinery.

Technical Specifications

Ordering Option Breakdown

• Base Model 330905: 3300 NSv Probe, M10X1 thread, without armor
• Option -08: Unthreaded length of 80 mm
• Option -13: Overall case length of 130 mm
• Option -10: Total cable length of 1.0 meter (39 inches)
• Option -02: Miniature coaxial ClickLoc connector, standard cable
• Option -05: Multiple international safety agency approvals

Installation Guidelines

• Maintain a recommended physical gap setting of 1.0 mm (40 mils) during installation.
• Tighten probe case to 11.3 N•m (100 in•lb) recommended torque, not exceeding 33.9 N•m (300 in•lb).
• Torque the first three case threads to 7.5 N•m (66 in•lb) recommended, maximum 22.6 N•m (200 in•lb).
• Keep cable bends above the minimum 25.4 mm (1.0 inch) bend radius to prevent inner core damage.
• Tighten probe connector hand-tight only, maximum 0.56 N•m (5 in•lb).

Commissioning & Maintenance Ease

Field commissioning requires simple DC voltage checks at the proximitor output. Set the bias target to -9.0 Vdc to align with the center linear range. ClickLoc connectors provide tactile feedback to ensure secure connection without special tooling.

System Compatibility

The 3300 NSv 330905 probe integrates fully with legacy 3300 RAM systems. It operates seamlessly with standard 3300 XL NSv Proximitor Sensors. It connects directly to 3500 and 1900/65 machinery monitoring systems using three-conductor shielded triad field wiring up to 305 meters (1,000 feet).

Agency Approvals & Certifications

• Agency Option -05: Multiple global approvals for hazardous areas including CSA, ATEX, and IECEx certifications.
• Material Compliance: AISI 304 stainless steel case and PPS tip comply with rigorous industrial chemical standards.

Package Contents & Warranty

• 1 x Bently Nevada 330905-08-13-10-02-05 Proximity Probe
• 1 x Factory Sealed Packaging Box
• 12 Months Comprehensive Factory Warranty

Shipping & Express Delivery

We process and dispatch all orders within 24 to 48 hours. Fast global express shipping is available via FedEx, UPS, and DHL with full tracking support.

Typical Application Scenarios

• Centrifugal process gas compressors with counterbore mounting constraints
• High-speed boiler feed pumps using fluid-film sleeve bearings
• Small shaft radial vibration and axial (thrust) position monitoring
• Gearboxes with narrow internal installation clearances

Machinery Diagnostics Capabilities

The 3300 NSv probe feeds high-fidelity dynamic vibration signals to diagnostic software like System 1. Reliability engineers analyze shaft orbit plots, spectrum cascades, and peak-to-peak vibration trends. These metrics identify imbalance, shaft misalignment, oil whirl, and bearing rub conditions before catastrophic failure occurs.

Global PLC Spare HUB's Insight

Our field reliability engineering team frequently specifies the Bently Nevada 330905-08-13-10-02-05 for retrofits on older natural gas booster compressors. Standard 8 mm probes often suffer from target side-view interference when mounted in narrow counterbores. The probe side-wall contact creates false electrical noise. During a recent refinery overhaul, replacing standard probes with the 3300 NSv eliminated false high-vibration trips caused by tight housing clearances. This upgrade saved the operator over 18 hours of unplanned downtime.

Selection Guide

• Thread Type: Choose M10X1 (330905) for metric taps or 3/8-24 UN (330901) for imperial taps.
• Unthreaded Length: Select based on your mounting bracket thickness to ensure threads do not jam inside the casing tap.
• Total System Length: Match probe cable length plus extension cable length exactly to your Proximitor Sensor rating (e.g., 5m probe + extension system).

Frequently Asked Questions (FAQ)

Q1: What makes the 3300 NSv probe superior to older 3000-series 190 probes in tight spaces?

A: The 3300 NSv features a smaller tip diameter and optimized magnetic field emission. This design drastically reduces side-view sensitivity to adjacent metal walls, allowing accurate shaft measurements in deep counterbores.

Q2: Can I splice the coaxial cable if my cable length is too long?

A: No. Splicing coaxial probe cables alters system impedance and capacitance. Cable modification degrades scale factor accuracy and invalidates calibration.

Q3: How do I verify if my installed probe tip is damaged or shorted?

A: Measure DC resistance between the center conductor and outer conductor of the ClickLoc connector using a multimeter. A healthy 1.0-meter 330905 probe must read 4.2 ± 0.5 ohms.

Q4: Why does my gap voltage read outside the -1 to -13 Vdc range after installation?

A: Out-of-range voltage indicates incorrect physical mechanical gap distance, target material differences from 4140 steel, or severe side-wall metal interference.

Tags