330103-00-05-90-02-05 Bently Nevada 3300 XL 8 mm Metric Proximity Probe

1. Product Identification | 3300 XL 8 mm Series

Bently Nevada 330103-00-05-90-02-05 is a metric 3300 XL 8 mm Proximity Probe designed for non-contact displacement measurement in rotating machinery monitoring systems. It detects the position of a conductive target, typically a machine shaft, and works with a compatible 3300 XL Proximitor Sensor and monitoring instrument.

This configuration features an M10 x 1 threaded case, a 50 mm overall case length, a 9.0 m standard cable, and a miniature coaxial ClickLoc connector. Its PPS probe tip and stainless-steel case support industrial monitoring applications where stable mechanical installation and reliable signal transmission are required.

2. Configuration Breakdown | Decode the Full Part Number

Complete model: 330103-00-05-90-02-05

Follow the configuration tree below to identify the supplied probe arrangement.

• 330103 — 3300 XL 8 mm proximity probe, M10 x 1 thread, without armor
  • 00 — Unthreaded length option; minimum unthreaded length is 0 mm
  • 05 — Overall case length: 50 mm
  • 90 — Total probe cable length: 9.0 m (29.5 ft)
  • 02 — Miniature coaxial ClickLoc connector with standard cable
  • 05 — CSA, ATEX, and IECEx approval option, subject to the applicable certification and installation requirements

Before ordering: Confirm the complete suffix against the equipment documentation and the applicable manufacturer configuration drawing. Verify that the connector, cable length, thread, and approval requirements match the installed system.

3. Engineering Data | Key Specifications

4. Measurement Characteristics | Gap and Linear Range

The probe measures shaft displacement through an electromagnetic sensing arrangement. The output depends on the probe, extension cable, compatible Proximitor Sensor, target material, and installation geometry.

Commissioning note: Do not set the probe gap by mechanical distance alone. Verify the actual DC gap voltage with the compatible Proximitor Sensor and follow the system-specific installation procedure.

5. Mechanical and Environmental Limits

Pressure application warning: If the installation requires a verified pressure seal, request the manufacturer’s guidance on testing and suitability before commissioning. Do not assume the probe has passed a pressure test.

6. Cable, Connector and Field Wiring

• Probe assembly: This model includes a 9.0 m standard cable and a miniature coaxial ClickLoc connector.
• Field wiring conductor size: 0.2–1.5 mm² (16–24 AWG), according to the supplied technical data.
• Recommended wiring: Three-conductor shielded triad cable with tinned field wiring, as specified for the applicable system arrangement.
• Maximum field-wiring length: 305 m (1,000 ft) between the 3300 XL Proximitor Sensor and the monitor.
• High-frequency performance: Longer field wiring can cause signal roll-off. Review the manufacturer’s frequency-response data when designing long cable runs.

Important distinction: The 9.0 m length is the probe assembly’s specified total cable length. The 305 m figure refers to the separate field-wiring distance between the Proximitor Sensor and monitor. These are different cable segments and should not be treated as interchangeable limits.

7. Hazardous-Area Installation and Approvals

The specified suffix includes a CSA, ATEX, and IECEx approval option. The supplied technical information also describes installation arrangements for intrinsically safe and nonincendive circuits.

• Intrinsically safe installation: The referenced documentation describes use with suitable Zener barriers or galvanic isolators, following drawing 141092 and the applicable system requirements.
• Nonincendive installation: The referenced documentation identifies circuit connections following drawing 140979.
• Area classification: The listed classifications include specified Class I, Zone 0 and Zone 2, and Division 2 applications, depending on the protection method and approved configuration.

Hazardous-area suitability depends on the complete installed circuit, associated apparatus, wiring method, temperature class, gas or dust group, and local regulations. Confirm the exact markings and certificates for the supplied item before installation. Do not rely on the suffix alone to establish system-level compliance.

8. Applications | Where This Probe Fits

• Steam and gas turbines: Shaft vibration and relative displacement monitoring when the installed monitoring system supports the probe configuration.
• Centrifugal compressors: Non-contact shaft movement measurement for machinery protection and condition monitoring.
• Pumps and industrial drives: Radial shaft vibration monitoring on compatible machinery.
• Gearboxes and rotating equipment: Shaft position and dynamic displacement measurement where an appropriate conductive target and mounting arrangement are available.
• Plant machinery protection systems: Integration with compatible Bently Nevada 3300 XL Proximitor Sensors and monitoring channels.

Compatibility check: Verify the required probe system length, Proximitor Sensor model, monitor input, target material, mounting thread, and hazardous-area design. A probe should not be selected by physical appearance or thread size alone.

9. Diagnostic Guidance | Common Field Checks

Diagnostic limitation: The probe is a sensing component, not a standalone diagnostic monitor. Fault alarms, vibration trends, alert limits, and machine-protection decisions depend on the connected Proximitor Sensor, monitor channel, configuration, and monitoring software.

10. Global PLC Spare HUB's Insight | Selection and Maintenance Notes

For machinery monitoring, the probe assembly and its associated electronics must be treated as one measurement chain. A correct thread and cable length do not guarantee electrical compatibility or measurement accuracy.

• For replacement planning: Match the complete part number, including the case-length, cable-length, connector, and approval suffixes.
• For retrofit projects: Confirm the installed Proximitor Sensor and monitor requirements before substituting a different probe or cable arrangement.
• For commissioning: Check the gap voltage, mechanical mounting, connector engagement, signal stability, and monitor channel configuration.
• For harsh environments: Assess temperature exposure, cable routing, pressure-seal requirements, and hazardous-area certification as separate engineering checks.
• For maintenance teams: Record the installed model, measured gap voltage, machine operating state, and baseline vibration data. This helps distinguish installation problems from actual machinery changes.

11. Five Professional FAQs | Selection and Troubleshooting

Q1. Can the 330103-00-05-90-02-05 replace another 3300 XL 8 mm probe with the same M10 x 1 thread?

Not automatically. Confirm the complete part number, case length, cable length, connector type, approval requirements, and compatibility with the existing Proximitor Sensor. A matching thread does not establish electrical or mechanical interchangeability.

Q2. What should an engineer verify if the replacement probe produces a different DC gap voltage?

First confirm the measurement method and the specified gap-setting procedure. Then check the mounting position, target material, connector seating, cable condition, and Proximitor Sensor compatibility. Compare results with the manufacturer's system specifications before concluding that the probe is defective.

Q3. Is the 9.0 m cable suitable for every installation requiring a 3300 XL 8 mm probe?

No. The cable length must match the compatible Proximitor Sensor and the complete measurement-chain requirements. Check the existing system documentation before ordering. Also distinguish the probe assembly's 9.0 m cable from the separate field wiring between the Proximitor Sensor and monitor.

Q4. Can this standard-cable version be installed where temperatures reach the extended-temperature limits?

Do not assume so. The supplied specifications list separate limits for the standard probe and an extended-temperature configuration. Verify the exact part configuration and temperature ratings of the probe tip, cable, and connector against the actual operating conditions.

Q5. What information should be provided when requesting a replacement quote?

Provide the full part number, installed Proximitor Sensor model, monitor or rack type, required cable length, mounting-thread details, operating temperature, and hazardous-area requirements. If possible, include a photo of the nameplate and the existing installation. This reduces the risk of ordering a probe with the wrong connector, cable, or approval configuration.

12. Ordering, Warranty and Shipping

• Product: Bently Nevada 330103-00-05-90-02-05
• Series: 3300 XL 8 mm Proximity Probes, Metric
• Warranty: 12 months, subject to the seller's written warranty terms.
• Shipping carriers: FedEx, UPS, and DHL, subject to destination and service availability.
• Dispatch target: 24–48 hours after order confirmation, subject to stock availability and payment clearance.
• Before dispatch: Confirm the model suffix, product condition, packaging, and any documentation required for the installation.

Request a quotation for the Bently Nevada 330103-00-05-90-02-05. Include your quantity, destination country, and any compatibility or certification requirements so the order can be reviewed against your application.

Tags