1746-OV8 Allen-Bradley SLC 500 24VDC Output Module

Product Overview

The 1746-OV8 Allen-Bradley SLC 500 24VDC Output Module provides eight discrete current-sinking output channels grouped into a single common. Engineered for single-slot chassis integration, this hardware drives 10-50 VDC industrial loads with fast switching dynamics, robust thermal management, and reliable backplane communication across legacy control platforms.

Configuration and Technical Parameters

Installation and Mechanical Guidelines

Insert the 1746-OV8 module directly into any available single slot of an SLC 500 chassis or local expansion rack. The front panel features color-coded removable terminal blocks with self-lifting pressure plates supporting up to two 14 AWG (2 mm²) wires per terminal, or quick-connect pre-wired cables paired with 1492 interface modules.

Debugging and Maintenance Convenience

Global PLC Spare HUB's Insight: Front-panel LED status indicators offer immediate visual verification of individual output point energization. If an output channel fails to latch under load, check the 1 mA minimum load requirement and verify that operating temperatures do not exceed the derated 60°C threshold.

Compatibility and Environmental Standards

Fully compatible with all standard SLC 500 modular processors and remote chassis racks, this unit carries Class I, Division 2 hazardous location certifications. It operates dependably in dry industrial environments enduring up to 30g operating shock and 95% non-condensing relative humidity.

Package Contents, Warranty, and Logistics

The shipment includes the 1746-OV8 discrete output module and associated terminal blocks. Global PLC Spare HUB backs this industrial component with a solid 12-month warranty. All orders dispatch securely within 24 to 48 hours through trusted global carriers including FedEx, UPS, and DHL.

Target Applications and Diagnostic Capabilities

• High-speed solenoid valve actuation and pneumatic cylinder control
• DC relay and contactor switching in automated assembly lines
• Discrete indicator lamp signaling and audible alarm driving
• Interlock control management in localized machine skids

Selection Guide and Engineering Advice

When engineering high-density 24VDC architectures, verify that total module current draw does not exceed 8.0 Amperes at 30°C. If ambient cabinet temperatures approach 60°C, apply the derated 4.0 Ampere total module limit to prevent thermal overload and premature component degradation.

Frequently Asked Questions

Q: Why does a low-current LED indicator flicker when connected to this sinking output module?
A: The 1746-OV8 requires a minimum load current of 1 mA; ultra-low-current LED indicators drawing less than this threshold may fail to turn off completely due to the 1 mA maximum off-state leakage current.

Q: How does ambient temperature variation impact the continuous current capacity per point?
A: The continuous current rating halves from 1.0 Ampere at 30°C down to 0.50 Amperes at 60°C due to internal thermal accumulation limits within the single-slot enclosure.

Q: Can pre-wired 1492 interface cables be used to streamline multi-point cabinet wiring?
A: Yes, technicians can substitute traditional individual wire terminations with pre-wired cables linked to 1492 interface blocks to reduce wiring time and eliminate mis-termination errors.

Q: What protection is integrated to handle inductive kickback when driving DC solenoids?
A: Users must install external flyback diodes across inductive DC loads like solenoids and relays to suppress voltage transients and protect the internal switching transistors.

Q: Does the 1746-OV8 draw any power from the 24V DC backplane bus rail?
A: No, backplane current consumption is strictly 135 milliamps from the 5 Volts DC bus, drawing 0 mA from any internal 24V backplane source.

Tags