10F5A1D-3AGA KEB Combivert F5 2.2kW 400V AC Drive Fast Shipping

Technical Breakdown

KEB Combivert F5 Multi Frequency Inverter Specifications

The 10F5A1D-3AGA is a high-precision multi-frequency inverter belonging to the KEB Combivert F5 series. Engineered for controlled AC motor operations, this unit delivers 4.0 kVA power output at 400V AC 3-phase, supporting continuous motor loads up to 2.2 kW (3 HP) with a rated current of 5.8A.

It features integrated dual TTL incremental encoder inputs for closed-loop vector control, an internal GTR7 braking transistor for rapid dynamic deceleration, and an air-cooled heat sink structure inside a compact IP20 housing.

Specifications Matrix

System Target Applications & Diagnostics

Application Compatibility & Real-Time Monitoring

• Target Equipment: High-speed CNC spindles, positioning tables, packaging conveyors, textile spinning machines, and dynamic lift mechanism drives.
• Dual-Encoder Feedback Handling: Interface 1 and 2 accept differential RS422/TTL incremental feedback, allowing dual-loop velocity monitoring or master-slave speed synchronization.
• Overcurrent Protection: Trip tracking triggers instantaneous shutdown when output exceeds the 10.4A threshold to safeguard IGBT power modules.
• Thermal Dissipation Monitoring: Onboard heat sink sensors trigger air cooling fan regulation and thermal fault reporting prior to junction damage.
• Braking Circuit Supervision: Integrated GTR7 chopper continuously measures DC bus overvoltage during regenerative deceleration phases.

Global PLC Spare HUB Review

Engineering Field Observations

• The 10F5A1D-3AGA remains a benchmark for compact 2.2kW closed-loop VFD replacements due to its onboard dual TTL channels.
• Its 90mm slim footprint allows high-density side-by-side mounting inside crowded control enclosures.
• The GTR7 braking transistor simplifies high-duty cycle stopping applications without needing external chopper units—only an external resistor bank is required.
• Operating at an 8kHz switching frequency balances low acoustic motor noise with manageable thermal losses on the heat sink.

Fulfillment & Warranty Terms

Global Logistics & Support

• Covered under a comprehensive 12-month functional warranty.
• Worldwide expedited shipping handled via FedEx, UPS, and DHL.
• Dispatched with protective ESD-safe packaging and physical quality check reports.

Frequently Asked Questions (FAQ)

Technical Selection & Operational Guidance

Q: How do you configure dual encoders on this VFD variant?
A: TTL incremental encoders plug directly into Interfaces 1 and 2; channel scaling and impulse counts must be configured in the F5 parameter tree to match motor PPR settings.

Q: What size braking resistor should be paired with the internal GTR7 transistor?
A: Select a resistor value based on the DC bus voltage threshold and peak power rating, ensuring minimum resistance limits stated in the technical manual are maintained.

Q: Can this drive operate standard asynchronous induction motors without encoder feedback?
A: Yes, it supports open-loop V/f and sensorless vector control modes alongside its closed-loop TTL capabilities.

Q: What precautions are necessary when operating near the 599Hz output limit?
A: High-frequency operation requires verifying motor insulation ratings, de-rating output current for high switching frequencies, and minimizing output cable length.

Q: What thermal clearance is required around the air cooler housing?
A: Maintain at least 100mm clearance above and below the 90x250x181mm chassis to ensure unrestricted vertical airflow through the heat sink fins.

Tags