100630-08-15-05-02 Bently Nevada 3300 XL Proximity Probe Underwater Sensor

Engineering Architecture Overview

The 100630-08-15-05-02 proximity probe, engineered by Bently Nevada within the 3300 XL series, delivers high-accuracy vibration and displacement measurement in submerged industrial environments. Constructed from durable 304 Stainless Steel with protective Tefzel Tubing, this 8mm sensor tracks shaft dynamics reliably while withstanding harsh fluid exposure up to a 34 Bar nitrogen pressure seal rating.

Technical Specification Matrix

Model 100630 Configuration Breakdown

• Base Part Number: 100630 (Submersible 8mm proximity assembly)
• Option A (Unthreaded Length - 08): Configured to 0.8 inches (Scalable from 0.8 in to 9.6 in in 0.1-inch increments)
• Option B (Overall Case Length - 15): Configured to 1.5 inches (Scalable from 0.0 in to 8.9 in in 0.1-inch increments)
• Option C (Total Length - 05): 0.5 metre (1.6 feet) integral cable length
• Option D (Connector & Cable - 02): Miniature coaxial ClickLoc connector with standard protective tubing

Global PLC Spare HUB Insight

Field engineering data on the 100630-08-15-05-02 sensor indicates that premature cable failures in fluid environments usually stem from submerging the unsealed ClickLoc connector end. Technicians must ensure that connector junctions remain isolated inside dry terminal enclosures, while utilizing the 304 stainless steel case strictly in non-saline media to prevent localized pitting corrosion.

Recommended Applications and Target Machinery

• Hydroelectric turbine guide bearing vibration monitoring
• Submerged industrial fluid pump shafts and gearboxes
• Compressor crankcase lubrication and oil sump tracking
• Process fluid mixing vats and hydraulic power units

Advanced Diagnostics and Safety Compliance

The sensor integrates smoothly with proximity transducer systems to deliver continuous gap voltage feedback, allowing monitoring software to detect excessive rotor runout or bearing wear instantly. Hazardous area compliance is maintained via intrinsic safety zener barriers (drawing 141092) or galvanic isolators, satisfying Class I Zone 0 and Division 2 safety standards.

Buying Guide and Selection Criteria

When selecting a submersible probe configuration, verify your exact insertion depth requirements for unthreaded and overall case lengths. Confirm that your operating medium avoids salt-water exposure, and verify that your system architecture accommodates the ClickLoc miniature coaxial connector specification.

Frequently Asked Questions

Q: Can the complete probe assembly including the connector be fully submerged in liquid?

A: No, while the tubing protects the cable, the connector end is not sealed against liquids and must remain in a dry environment.

Q: Is the 304 Stainless Steel probe body suitable for offshore or marine salt-water applications?

A: No, the standard 304 stainless steel material is not rated for salt-water exposure and can experience corrosion in saline environments.

Q: What specific safety installation method is required for Class I Zone 0 hazardous locations?

A: The probe must be installed with certified intrinsically safe zener barriers per drawing 141092 or paired with appropriate galvanic isolators.

Q: How should field technicians handle custom length ordering increments during replacement planning?

A: Unthreaded and overall case lengths must be specified and ordered in exact 0.1-inch increments within their respective minimum and maximum limits.

Q: What pressure threshold is the factory nitrogen seal rated to withstand?

A: The standard pressure seal is factory-rated to withstand up to 34 Bar (500 psi) of Nitrogen pressure.

Logistics, Packaging, and Warranty

• Global express distribution via FedEx, UPS, and DHL.
• Guaranteed rapid order dispatch within 24 to 48 hours.
• Secured in heavy-duty industrial anti-static packaging.
• Backed by a robust 12-month warranty.

Tags