{"product_id":"yokogawa-f3nc96-0n-motion-control-module-mechatrolink-ii","title":"Yokogawa F3NC96-0N Motion Control Module | MECHATROLINK-II","description":"\u003ch3\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #0070c0;\"\u003eYokogawa F3NC96-0N\u003c\/span\u003e\u003c\/strong\u003e is a positioning module with a \u003cstrong\u003eMECHATROLINK-II interface\u003c\/strong\u003e. It supports coordinated motion control and independent axis operation through compatible network devices. The module exchanges motion commands and status data over a synchronous master\/slave network. It supports linear interpolation and independent axis movement, subject to the connected equipment and available commands. With selectable communication cycles, the \u003cstrong\u003eF3NC96-0N\u003c\/strong\u003e helps engineers configure multi-axis motion systems around application timing requirements. Its parameter access functions also support equipment configuration and operational diagnostics. \u003cstrong\u003eGlobal PLC Spare HUB's Insight:\u003c\/strong\u003e Engineers should verify the servo drive's MECHATROLINK-II command support before selecting this module. This step helps prevent command mismatches during commissioning.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eYokogawa\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eF3NC96-0N\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003ePositioning Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Interface\u003c\/td\u003e\n\u003ctd\u003eMECHATROLINK-II\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Rate\u003c\/td\u003e\n\u003ctd\u003e10 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Data Size\u003c\/td\u003e\n\u003ctd\u003e32 bytes, including subcommands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Cycle\u003c\/td\u003e\n\u003ctd\u003e1.0 ms for up to 8 axes; 2.0 ms for up to 15 axes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Topology\u003c\/td\u003e\n\u003ctd\u003eBus, multi-drop configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Method\u003c\/td\u003e\n\u003ctd\u003eSynchronous master\/slave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Cable\u003c\/td\u003e\n\u003ctd\u003e2-wire shielded twisted-pair proprietary cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Transmission Distance\u003c\/td\u003e\n\u003ctd\u003e50 m total cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Distance Between Stations\u003c\/td\u003e\n\u003ctd\u003e0.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition Reference Range\u003c\/td\u003e\n\u003ctd\u003e-2,147,483,648 to 2,147,483,647 reference units\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotion Functions\u003c\/td\u003e\n\u003ctd\u003eLinear interpolation and independent axis movement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStatus Monitoring\u003c\/td\u003e\n\u003ctd\u003eReads target position, current position, and other available status data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParameter Access\u003c\/td\u003e\n\u003ctd\u003eReads and writes parameters on compatible external equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification Note:\u003c\/strong\u003e The reference range uses signed 32-bit integer values. Actual travel distance depends on the configured reference unit and machine mechanics.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eCore Motion Control Functions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Interpolation:\u003c\/strong\u003e Coordinates supported axes with simultaneous movement starts and stops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndependent Axis Control:\u003c\/strong\u003e Executes MECHATROLINK-II commands for individual axes when connected devices support them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition Feedback Access:\u003c\/strong\u003e Reads target and current position data from compatible external equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParameter Management:\u003c\/strong\u003e Supports parameter reading and writing for connected devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Communication Timing:\u003c\/strong\u003e Offers 1.0 ms or 2.0 ms cycles according to the selected axis configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eTypical Industrial Applications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomated Assembly:\u003c\/strong\u003e Coordinates supported axes during component placement and mechanical positioning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging Machinery:\u003c\/strong\u003e Supports synchronized motion in feeding, indexing, and positioning operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Handling:\u003c\/strong\u003e Controls compatible motion axes in transfer and positioning systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Tool Auxiliaries:\u003c\/strong\u003e Supports positioning tasks that require coordinated or independent axis commands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduction Equipment:\u003c\/strong\u003e Provides access to position and parameter data for motion supervision.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Guidelines\u003c\/strong\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerify the Controller:\u003c\/strong\u003e Confirm that the target PLC platform supports the \u003cstrong\u003eF3NC96-0N\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck Device Compatibility:\u003c\/strong\u003e Verify MECHATROLINK-II compliance and command support for every connected device.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlan the Network:\u003c\/strong\u003e Keep total transmission cable length within 50 m. Maintain at least 0.5 m between stations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelect the Cable:\u003c\/strong\u003e Use the specified two-wire shielded twisted-pair cable. Confirm the cable type against the equipment manuals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfigure the Cycle:\u003c\/strong\u003e Select 1.0 ms for up to 8 axes or 2.0 ms for up to 15 axes, as applicable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerify Position Units:\u003c\/strong\u003e Confirm scaling, reference units, travel limits, and coordinate conventions before operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest Motion Safely:\u003c\/strong\u003e Start with low-speed movements and verify each axis before coordinated operation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAlways isolate hazardous machine motion before wiring or servicing. Follow the applicable PLC, drive, and machine safety procedures.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eCommissioning, Diagnostics, and Maintenance\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe module's status and parameter access functions help engineers investigate motion-system behavior. Actual diagnostic details depend on the connected devices and controller software.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition Verification:\u003c\/strong\u003e Compare target position and reported current position during controlled test movements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication Checks:\u003c\/strong\u003e Inspect cable connections, network configuration, and device readiness when communication fails.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParameter Verification:\u003c\/strong\u003e Compare drive parameters with approved commissioning records.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCycle-Time Assessment:\u003c\/strong\u003e Confirm that the selected communication cycle meets the application's motion requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoutine Inspection:\u003c\/strong\u003e Check connectors, cable shielding, terminal security, and cabinet conditions during planned maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eField Experience:\u003c\/strong\u003e An axis may respond incorrectly when the controller and servo drive use different position scaling. For example, a commanded movement may produce a smaller physical displacement than expected. Compare the configured reference unit with the drive's scaling parameters before changing motion commands. If a network fault occurs, check the cable and station configuration first. Then verify device compatibility and supported commands. This sequence helps separate communication issues from motion-parameter errors.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eCompatibility and Integration\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eF3NC96-0N\u003c\/strong\u003e uses the MECHATROLINK-II communication protocol. Successful integration requires matching hardware, firmware, configuration, and command support.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the host PLC model and supported module configuration.\u003c\/li\u003e\n\u003cli\u003eVerify the connected drive or external device supports MECHATROLINK-II.\u003c\/li\u003e\n\u003cli\u003eCheck the command set required for interpolation and independent axis movement.\u003c\/li\u003e\n\u003cli\u003eConfirm the selected cycle time supports the planned number of axes.\u003c\/li\u003e\n\u003cli\u003eValidate cable requirements and total network length.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not assume compatibility with MECHATROLINK-III, EtherCAT, or other motion networks. Confirm the exact protocol and hardware requirements in the applicable manufacturer's documentation.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eEnvironmental Limits and Certification\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe available specifications do not establish the module's operating temperature, storage temperature, humidity limits, vibration rating, shock rating, ingress protection, or electromagnetic immunity level. They also do not confirm specific CE, UL, UKCA, or hazardous-area approvals. Consult the official Yokogawa documentation for the exact hardware revision before installation in regulated environments.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003ePackaging and Delivery\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Yokogawa F3NC96-0N positioning module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessories:\u003c\/strong\u003e Included accessories depend on the confirmed supply configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocumentation:\u003c\/strong\u003e Availability depends on the order and supplied documentation package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Options:\u003c\/strong\u003e FedEx, UPS, and DHL, subject to destination and service availability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDispatch Time:\u003c\/strong\u003e 24–48 hours after order confirmation, subject to stock availability and order processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months, subject to the seller's written warranty terms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease confirm the module configuration, included accessories, shipping schedule, and warranty conditions with the sales team before ordering.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ1: What does the Yokogawa F3NC96-0N do?\u003c\/strong\u003e The \u003cstrong\u003eF3NC96-0N\u003c\/strong\u003e provides positioning control through a MECHATROLINK-II interface. It supports linear interpolation, independent axis commands, and access to external equipment status and parameters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ2: How many axes can the module support?\u003c\/strong\u003e The specified communication cycles support up to 8 axes at 1.0 ms or up to 15 axes at 2.0 ms. Confirm the complete system's configuration limits before commissioning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ3: Does the module support simultaneous multi-axis movement?\u003c\/strong\u003e Yes. It supports linear interpolation with simultaneous movement starts and stops. The connected equipment must support the required motion commands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ4: What should engineers check when communication fails?\u003c\/strong\u003e First, inspect the specified cable, connector seating, total cable length, and station spacing. Next, verify the protocol, station configuration, and device readiness. Consult controller diagnostics for additional fault details.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ5: Can the module work with any servo drive?\u003c\/strong\u003e No. The drive must support MECHATROLINK-II and the commands required by the application. Confirm compatibility with the relevant hardware and software manuals. \u003cstrong\u003eQ6: What does the 32-bit position range mean in practice?\u003c\/strong\u003e The module accepts signed 32-bit position reference values. The physical distance depends on the configured reference unit, electronic gearing, and mechanical transmission.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ7: What should buyers confirm before placing an order?\u003c\/strong\u003e Confirm the exact model, host PLC compatibility, communication protocol, axis requirements, cable specification, and required motion functions. Request written confirmation if the module must replace an existing installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ8: What information helps identify an intermittent positioning fault?\u003c\/strong\u003e Record the controller configuration, drive model, communication status, target position, current position, and fault timing. These details help engineers determine whether the problem relates to communication, scaling, or drive behavior.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ9: Does the product include cables or mounting accessories?\u003c\/strong\u003e The available product information does not confirm the accessory list. Ask the supplier to confirm the package contents before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ10: What warranty and shipping options are available?\u003c\/strong\u003e The stated sales terms provide a 12-month warranty and shipping options through FedEx, UPS, or DHL. Dispatch within 24–48 hours depends on stock availability, order confirmation, and processing.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy Source from Global PLC Spare HUB?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eGlobal PLC Spare HUB Review:\u003c\/strong\u003e Industrial spare-part selection requires more than matching a model number. Engineers should also verify the communication protocol, controller compatibility, supported motion commands, and installation requirements. Global PLC Spare HUB supports purchasing decisions with model identification and technical compatibility checks. Contact the team to confirm availability, delivery arrangements, warranty terms, and application requirements for the \u003cstrong\u003e\u003cspan style=\"color: #0070c0;\"\u003eYokogawa F3NC96-0N\u003c\/span\u003e\u003c\/strong\u003e. \u003cstrong\u003eRequest a Quote:\u003c\/strong\u003e Provide your required quantity, destination country, PLC model, and connected drive information. The sales team can then review compatibility and provide a quotation.\u003c\/p\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":67643674165430,"sku":"F3NC96-0N","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/F3NC96-0N-3.jpg?v=1792032119","url":"https:\/\/www.plcsparehub.com\/products\/yokogawa-f3nc96-0n-motion-control-module-mechatrolink-ii","provider":"Global PLC Spare Hub","version":"1.0","type":"link"}