{"product_id":"tm0180-01-05-35-05-02-provibtech-8mm-probe-sensor","title":"TM0180-01-05-35-05-02 ProvibTech 8mm Probe Sensor","description":"\u003ch3\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #1673c9;\"\u003eProvibTech TM0180-01-05-35-05-02\u003c\/span\u003e\u003c\/strong\u003e is an industrial \u003cstrong\u003e8mm eddy current proximity probe\u003c\/strong\u003e. It measures shaft displacement and vibration in rotating machinery. Its M10×1 threaded design supports standard industrial mounting arrangements.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eTM0180 Series\u003c\/strong\u003e addresses demanding machinery monitoring environments. Its rugged cable jacket resists tearing, abrasion, and corrosive exposure. This construction helps protect signal integrity during long-term operation.\u003c\/p\u003e\n\u003cp\u003eThe probe and extension cable include protective rubber boots. These boots shield connector interfaces against oil and dirt penetration. The design also helps reduce installation-related contamination risks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Engineering Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8mm eddy current sensing technology\u003c\/strong\u003e for non-contact displacement measurement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.0mm linear measurement range\u003c\/strong\u003e for shaft vibration monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7.87 mV\/μm sensitivity\u003c\/strong\u003e for dynamic displacement signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0–10 kHz frequency response\u003c\/strong\u003e for machinery vibration analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRugged cable construction\u003c\/strong\u003e for demanding industrial environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHazardous-area approvals\u003c\/strong\u003e for specified industrial installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIN rail or plate mounting\u003c\/strong\u003e for flexible driver installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eProvibTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTM0180-01-05-35-05-02\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Series\u003c\/td\u003e\n\u003ctd\u003eTM0180 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eStandard 8mm Eddy Current Proximity Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Configuration\u003c\/td\u003e\n\u003ctd\u003eM10×1, without armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Type\u003c\/td\u003e\n\u003ctd\u003e01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnthreaded Length\u003c\/td\u003e\n\u003ctd\u003e0.5 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Length\u003c\/td\u003e\n\u003ctd\u003e3.5 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Length Code\u003c\/td\u003e\n\u003ctd\u003e05 (0.5 m, according to supplied ordering information)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Configuration\u003c\/td\u003e\n\u003ctd\u003eCode 02: Connector included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.45 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Height\u003c\/td\u003e\n\u003ctd\u003e75 mm (2.95 inches)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Mounting\u003c\/td\u003e\n\u003ctd\u003e35mm DIN rail or plate mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cstrong\u003eElectrical and Measurement Performance\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003e-23 to -30 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Current\u003c\/td\u003e\n\u003ctd\u003eLess than 12 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasurement Technology\u003c\/td\u003e\n\u003ctd\u003eEddy current displacement sensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Linear Range\u003c\/td\u003e\n\u003ctd\u003e2.0 mm (80 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasurement Range\u003c\/td\u003e\n\u003ctd\u003e0.25–2.25 mm (10–90 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInitial Linear Range Point\u003c\/td\u003e\n\u003ctd\u003e0.25 mm (10 mils) from probe face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReference Target Material\u003c\/td\u003e\n\u003ctd\u003eAISI 4140 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003e7.87 mV\/μm (200 mV\/mil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinearity\u003c\/td\u003e\n\u003ctd\u003eWithin ±0.0254 mm (±1.0 mil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical Linearity Including Interchangeability\u003c\/td\u003e\n\u003ctd\u003e±0.038 mm (±1.5 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e0–10.0 kHz (±3 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Target Size\u003c\/td\u003e\n\u003ctd\u003e15 mm (0.6 inch) diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003eNot separately specified in the supplied datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eMeasurement Engineering Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe specified sensitivity supports dynamic shaft displacement measurement.\u003c\/li\u003e\n\u003cli\u003eThe 2.0mm linear range covers the specified 0.25–2.25mm operating interval.\u003c\/li\u003e\n\u003cli\u003eThe ±0.0254mm linearity specification applies to a calibrated probe system.\u003c\/li\u003e\n\u003cli\u003eThe ±3dB frequency response extends to 10kHz.\u003c\/li\u003e\n\u003cli\u003eUse the specified AISI 4140 target material during calibration.\u003c\/li\u003e\n\u003cli\u003eTarget diameter and surface geometry affect measurement performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eEnvironmental and Thermal Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eComponent\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Driver\u003c\/td\u003e\n\u003ctd\u003e-40°C to +80°C\u003c\/td\u003e\n\u003ctd\u003e-50°C to +100°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe\u003c\/td\u003e\n\u003ctd\u003e-40°C to +177°C\u003c\/td\u003e\n\u003ctd\u003e-40°C to +177°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtension Cable\u003c\/td\u003e\n\u003ctd\u003e-40°C to +177°C\u003c\/td\u003e\n\u003ctd\u003e-40°C to +177°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Environmental Performance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHumidity tolerance: 100% non-condensing.\u003c\/li\u003e\n\u003cli\u003eProbe and extension cable support demanding thermal conditions.\u003c\/li\u003e\n\u003cli\u003eThe rugged cable jacket resists mechanical tearing and environmental corrosion.\u003c\/li\u003e\n\u003cli\u003eProtective rubber boots help prevent oil and dirt from entering connector interfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTemperature Sensitivity:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReference configuration: Probe and 5-meter cable.\u003c\/li\u003e\n\u003cli\u003eTemperature interval: -35°C to +120°C.\u003c\/li\u003e\n\u003cli\u003eMid-range tolerance: Within ±0.3%\/°C.\u003c\/li\u003e\n\u003cli\u003eAt 2.25mm displacement: Nominal ±0.5%\/°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eProbe Configuration and Ordering Code\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCode Segment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eTM0180\u003c\/td\u003e\n\u003ctd\u003eStandard 8mm proximity probe family\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Type\u003c\/td\u003e\n\u003ctd\u003e01\u003c\/td\u003e\n\u003ctd\u003eProbe configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnthreaded Length\u003c\/td\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e0.5 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Length\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e3.5 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Length Code\u003c\/td\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003e0.5 m, according to supplied data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Code\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eConnector included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eComplete Ordering Number:\u003c\/strong\u003e \u003cspan style=\"color: #1673c9;\"\u003e\u003cstrong\u003eTM0180-01-05-35-05-02\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAlways verify the complete ordering number before replacement. Confirm connector configuration, cable length, thread dimensions, and driver compatibility.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Guide\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1. Mechanical Installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVerify the mounting thread and available installation clearance.\u003c\/li\u003e\n\u003cli\u003eConfirm the M10×1 mounting interface before installing the probe.\u003c\/li\u003e\n\u003cli\u003eCheck the shaft surface and target material before positioning the probe.\u003c\/li\u003e\n\u003cli\u003eMaintain the required probe-to-target clearance within the linear measurement range.\u003c\/li\u003e\n\u003cli\u003eSecure the probe without applying excessive mechanical force.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e2. Cable and Connector Installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRoute the cable away from high-current power conductors.\u003c\/li\u003e\n\u003cli\u003eAvoid sharp bends, excessive tension, and repeated mechanical movement.\u003c\/li\u003e\n\u003cli\u003eInspect connector contacts before making electrical connections.\u003c\/li\u003e\n\u003cli\u003eFit the protective rubber boot correctly.\u003c\/li\u003e\n\u003cli\u003eKeep connector interfaces clean and free from oil contamination.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e3. Driver Installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMount the driver on a 35mm DIN rail or suitable plate.\u003c\/li\u003e\n\u003cli\u003eVerify the driver supply voltage against the -23 to -30 VDC requirement.\u003c\/li\u003e\n\u003cli\u003eCheck the electrical grounding arrangement before commissioning.\u003c\/li\u003e\n\u003cli\u003eConfirm signal polarity and termination requirements against the system documentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eCommissioning and Maintenance\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCommissioning Checks:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eInspect the probe body, cable jacket, and connector assembly.\u003c\/li\u003e\n\u003cli\u003eVerify the probe mounting position and target material.\u003c\/li\u003e\n\u003cli\u003eApply the specified DC supply voltage.\u003c\/li\u003e\n\u003cli\u003eMeasure the static gap voltage with suitable test equipment.\u003c\/li\u003e\n\u003cli\u003eConfirm the displacement output across the calibrated linear range.\u003c\/li\u003e\n\u003cli\u003eCompare measured vibration signals with the machinery baseline.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePractical Maintenance Recommendations:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInspect cable jackets during scheduled machinery shutdowns.\u003c\/li\u003e\n\u003cli\u003eCheck rubber boots for cracks, looseness, and contamination.\u003c\/li\u003e\n\u003cli\u003eMonitor gradual changes in static gap voltage.\u003c\/li\u003e\n\u003cli\u003eInvestigate unstable readings before changing alarm thresholds.\u003c\/li\u003e\n\u003cli\u003eRecalibrate the complete measurement chain after probe replacement.\u003c\/li\u003e\n\u003cli\u003eRecord baseline vibration data after every maintenance intervention.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eTypical Applications and Diagnostic Capabilities\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eProvibTech TM0180 Series\u003c\/strong\u003e supports non-contact shaft displacement monitoring. It provides measurement signals for machinery condition monitoring systems.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eMonitoring Objective\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDiagnostic Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndustrial Pumps\u003c\/td\u003e\n\u003ctd\u003eShaft vibration monitoring\u003c\/td\u003e\n\u003ctd\u003eIdentifies abnormal vibration trends and potential bearing-related changes.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressors\u003c\/td\u003e\n\u003ctd\u003eRotor displacement monitoring\u003c\/td\u003e\n\u003ctd\u003eHelps detect changing rotor vibration patterns.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteam Turbines\u003c\/td\u003e\n\u003ctd\u003eShaft movement measurement\u003c\/td\u003e\n\u003ctd\u003eSupports vibration analysis and machinery protection.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGas Turbines\u003c\/td\u003e\n\u003ctd\u003eRotating shaft condition monitoring\u003c\/td\u003e\n\u003ctd\u003eProvides displacement signals for monitoring systems.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndustrial Fans\u003c\/td\u003e\n\u003ctd\u003eDynamic shaft displacement\u003c\/td\u003e\n\u003ctd\u003eHelps identify abnormal operating vibration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGearboxes\u003c\/td\u003e\n\u003ctd\u003eShaft movement monitoring\u003c\/td\u003e\n\u003ctd\u003eSupports trend analysis of rotating components.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eDiagnostic Examples from Field Engineering:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnstable vibration readings:\u003c\/strong\u003e Inspect connector contamination and cable jacket damage first. Check grounding and cable routing before replacing the probe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnexpected shaft displacement:\u003c\/strong\u003e Verify the static gap voltage and target surface condition. Check probe alignment before changing alarm limits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent signal fluctuations:\u003c\/strong\u003e Inspect connector engagement and cable movement. Look for damaged insulation or moisture ingress.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature-related signal drift:\u003c\/strong\u003e Compare operating temperature with the specified temperature sensitivity. Check the complete probe and driver configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese checks help engineers separate sensor installation problems from genuine machinery condition changes. The probe alone does not identify specific mechanical faults. Engineers must evaluate its signal alongside operating conditions and other vibration measurements.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eCompatibility and System Integration\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasurement Principle:\u003c\/strong\u003e Eddy current proximity displacement measurement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTarget Material:\u003c\/strong\u003e Verify compatibility with the specified conductive target material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalibration:\u003c\/strong\u003e Use a compatible driver and calibrated probe-extension cable system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Interface:\u003c\/strong\u003e Confirm the receiving monitor supports the probe driver's electrical output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Interface:\u003c\/strong\u003e Verify M10×1 thread dimensions and installation clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement:\u003c\/strong\u003e Match the complete part number and electrical characteristics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Compatibility Notice:\u003c\/strong\u003e Do not assume direct interchangeability with Bently Nevada, Metrix, or other proximity probe systems. Different manufacturers may use different driver voltages, sensitivities, connector configurations, and calibration curves.\u003c\/p\u003e\n\u003cp\u003eConfirm the complete measurement chain before replacing an existing probe. This includes the probe, extension cable, driver, monitor input, and calibration requirements.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eCertifications and Hazardous-Area Approvals\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eClassification or Approval\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eATEX – Driver\u003c\/td\u003e\n\u003ctd\u003eII 1 G, EEx ia IIC T4, Ta = -40°C to +80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eATEX Certificate – Driver\u003c\/td\u003e\n\u003ctd\u003eKEMA06ATEX0217X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA – Intrinsically Safe\u003c\/td\u003e\n\u003ctd\u003eClass I, Division 1, Groups A, B, C, D, T4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA – Zone Classification\u003c\/td\u003e\n\u003ctd\u003eClass I, Zone 0, Ex ia IIC T4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA – Non-Incendive\u003c\/td\u003e\n\u003ctd\u003eClass I, Division 2, Groups A, B, C, D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCEC\u003c\/td\u003e\n\u003ctd\u003eEx ia IIC T4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGOST R\u003c\/td\u003e\n\u003ctd\u003e0Ex ia IIC T4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eATEX – Probe and Cable\u003c\/td\u003e\n\u003ctd\u003eII 1 G, Ex ia IIC T4, Ta = -55°C to +115°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eATEX – Probe and Cable\u003c\/td\u003e\n\u003ctd\u003eII 2 G, Ex ia IIC T2, Ta = -55°C to +232°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eATEX Certificate – Probe and Cable\u003c\/td\u003e\n\u003ctd\u003eKEMA07ATEX0110X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA – Probe and Cable\u003c\/td\u003e\n\u003ctd\u003eClass I, Division 1, Groups A, B, C, D, Ex ia IIC T4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eEngineering Compliance Note:\u003c\/strong\u003e Verify the exact certificate, equipment marking, installation conditions, and associated apparatus requirements before hazardous-area deployment. Driver and probe\/cable approvals have different temperature limits. Do not treat their ratings as interchangeable.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eGlobal PLC Spare HUB's Insight\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eIn rotating machinery applications, proximity probe reliability depends on more than the sensing element. Cable integrity, connector protection, grounding, target material, and calibration all influence measurement stability.\u003c\/p\u003e\n\u003cp\u003eConsider a centrifugal pump with intermittent shaft vibration readings. The monitoring system may show unstable displacement values during operation. An engineer should inspect the cable jacket and connector interfaces before replacing the sensor.\u003c\/p\u003e\n\u003cp\u003eA damaged cable jacket can increase electrical interference risks. Poor connector protection can also allow oil and dirt to enter the connection. These conditions may affect signal stability.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eTM0180-01-05-35-05-02\u003c\/strong\u003e addresses several installation challenges through its rugged cable construction and protective rubber boot. However, engineers must still verify grounding, cable routing, and complete system calibration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Selection Advice:\u003c\/strong\u003e Confirm the full part number before ordering. Check the 0.5m length code, M10×1 thread, connector configuration, and driver compatibility. For hazardous-area installations, verify the complete certification chain.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003ePackaging and Delivery\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStandard Packaging List:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 × ProvibTech TM0180-01-05-35-05-02 Standard 8mm Probe.\u003c\/li\u003e\n\u003cli\u003eStandard connector configuration according to ordering code 02.\u003c\/li\u003e\n\u003cli\u003eProtective rubber boot, as specified for the probe and extension cable assembly.\u003c\/li\u003e\n\u003cli\u003eStandard protective export packaging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Note:\u003c\/strong\u003e Confirm the exact supplied accessories and cable configuration against the purchase order. Driver and extension cable inclusion require separate confirmation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping and Fulfillment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShipping Methods: FedEx, UPS, and DHL.\u003c\/li\u003e\n\u003cli\u003eDispatch Time: Typically within 24–48 hours after order confirmation.\u003c\/li\u003e\n\u003cli\u003ePackaging: Protective packaging for international transportation.\u003c\/li\u003e\n\u003cli\u003eWarranty: \u003cstrong\u003e12-month warranty\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eTechnical Assistance: Support for model verification and compatibility checks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ1: What does the ProvibTech TM0180-01-05-35-05-02 measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures shaft displacement through eddy current sensing. Monitoring systems use its output for shaft vibration and machinery condition analysis.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ2: What is the linear measurement range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe specified linear range is 2.0mm. Its operating interval extends from 0.25mm to 2.25mm from the probe face.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ3: Can this probe operate in high-temperature environments?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe probe and extension cable support temperatures from -40°C to +177°C. The driver has a separate operating range of -40°C to +80°C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ4: Why does a proximity probe produce unstable readings after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCommon causes include incorrect probe clearance, poor grounding, damaged cable insulation, and contaminated connectors. Check these conditions before replacing the sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ5: Can I connect this probe directly to a PLC analog input?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo not connect it directly without verifying the interface. Confirm the driver output type and PLC input requirements. Use a compatible signal-conditioning arrangement when necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ6: What should engineers check when replacing an existing proximity probe?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVerify the thread, cable length, connector, sensitivity, driver voltage, and calibration curve. Matching the mechanical dimensions alone does not guarantee electrical compatibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ7: Does the TM0180-01-05-35-05-02 include an extension cable and driver?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe supplied ordering information identifies the probe configuration and connector code. Confirm separate driver and extension cable inclusion before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ8: How should engineers select a replacement for a hazardous-area installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCheck the probe and cable certificates separately. Verify the driver approval, gas group, temperature class, ambient limits, and associated apparatus requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ9: How can maintenance teams identify cable-related measurement problems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInspect the cable jacket, connector contacts, and protective boots. Compare signal stability during stationary and operating conditions. Check grounding before adjusting alarm settings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ10: What information should buyers provide when requesting a quotation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProvide the complete part number, required quantity, operating environment, and delivery destination. Include existing driver and extension cable models when requesting compatibility confirmation.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWarranty and Technical Support\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eGlobal PLC Spare HUB\u003c\/strong\u003e provides a \u003cstrong\u003e12-month warranty\u003c\/strong\u003e for this product, subject to the applicable sales terms.\u003c\/p\u003e\n\u003cp\u003eContact our team for pricing, stock confirmation, product identification, and technical compatibility assistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequest a quotation for:\u003c\/strong\u003e \u003cspan style=\"color: #1673c9;\"\u003e\u003cstrong\u003eProvibTech TM0180-01-05-35-05-02\u003c\/strong\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/TM0180.png?v=1783929557\" alt=\"\"\u003e\u003c\/p\u003e","brand":"ProvibTech","offers":[{"title":"Default Title","offer_id":67980321325238,"sku":"TM0180-01-05-35-05-02","price":152.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/TM0180-07-00-04-10-02_a5833fae-a384-45e7-a7aa-e582748b6fd4.jpg?v=1793605395","url":"https:\/\/www.plcsparehub.com\/products\/tm0180-01-05-35-05-02-provibtech-8mm-probe-sensor","provider":"Global PLC Spare Hub","version":"1.0","type":"link"}