{"product_id":"tlp-b200-300-djmd2a-allen-bradley-tl-series-3-0-kw-servo-motor","title":"TLP-B200-300-DJMD2A Allen-Bradley TL-Series 3.0 kW Servo Motor","description":"\n\u003ch2\u003eAllen-Bradley TLP-B200-300-DJMD2A Kinetix TL-Series Servo Motor\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eTLP-B200-300-DJMD2A\u003c\/strong\u003e is an Allen-Bradley Kinetix TL-Series servo motor designed for industrial motion-control systems that require controlled torque and repeatable positioning. Its 400 V class design, 3.0 kW rating, and 28.7 N·m continuous stall torque make it a candidate for demanding automated machinery.\u003c\/p\u003e\n\n\u003cp\u003eThis configuration combines a 200 mm bolt-circle frame, a 24-bit single-turn absolute encoder with multi-turn capability requiring a battery, and a keyed shaft. It has no holding brake and uses the standard shaft configuration without a shaft seal. Verify the complete motor code and drive compatibility before ordering.\u003c\/p\u003e\n\n\u003ch3\u003e01 | Configuration at a Glance\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAllen-Bradley\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Series\u003c\/th\u003e\n\u003ctd\u003eKinetix TL-Series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003eTLP-B200-300-DJMD2A\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eTL-Series Servo Motor\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage Class\u003c\/th\u003e\n\u003ctd\u003e400 V AC class\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRated Power\u003c\/th\u003e\n\u003ctd\u003e3.0 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eContinuous Stall Torque\u003c\/th\u003e\n\u003ctd\u003e28.7 N·m\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFrame Size\u003c\/th\u003e\n\u003ctd\u003e200 mm bolt-circle frame\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFeedback Device\u003c\/th\u003e\n\u003ctd\u003e24-bit single-turn absolute encoder; multi-turn operation requires a battery\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eShaft Configuration\u003c\/th\u003e\n\u003ctd\u003eKeyed shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHolding Brake\u003c\/th\u003e\n\u003ctd\u003eNot included in the specified configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eShaft Seal\u003c\/th\u003e\n\u003ctd\u003eStandard configuration without shaft seal\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003e02 | Model Code and Configuration Breakdown\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003cth\u003eConfiguration Meaning\u003c\/th\u003e\n\u003cth\u003eSelection Consideration\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTLP\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTL-Series servo motor family\u003c\/td\u003e\n\u003ctd\u003eConfirm that the intended servo drive supports this motor family and feedback interface.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400 V AC class\u003c\/td\u003e\n\u003ctd\u003eMatch the motor voltage class to the selected drive and facility power architecture.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e200\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200 mm bolt-circle frame size\u003c\/td\u003e\n\u003ctd\u003eCheck mounting dimensions, flange clearance, and mechanical alignment.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e300\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.0 kW motor rating in the supplied model description\u003c\/td\u003e\n\u003ctd\u003eEvaluate the complete speed-torque curve, load inertia, and duty cycle.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24-bit single-turn absolute encoder; multi-turn capability requires a battery\u003c\/td\u003e\n\u003ctd\u003eConfirm encoder support, battery requirements, and position-retention behavior with the drive documentation.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eJ\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eKeyed shaft\u003c\/td\u003e\n\u003ctd\u003eMatch the coupling or pulley bore and key dimensions to the motor shaft.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard configuration without shaft seal\u003c\/td\u003e\n\u003ctd\u003eAssess exposure to dust, moisture, oil, and other contaminants at the installation point.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eOrdering note:\u003c\/strong\u003e The breakdown above follows the supplied model description. Confirm the complete catalog number against the applicable Allen-Bradley documentation, particularly connector, mounting, and encoder details that are not fully specified here.\u003c\/p\u003e\n\n\u003ch3\u003e03 | Motion-Control Engineering Considerations\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTorque sizing:\u003c\/strong\u003e The stated 28.7 N·m continuous stall torque is a useful reference, but it does not establish the available torque at every operating speed. Check the motor's torque-speed curve and drive limits.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower and drive matching:\u003c\/strong\u003e Select a compatible 400 V-class servo drive based on motor current, continuous and peak torque, feedback interface, and application duty cycle.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePosition feedback:\u003c\/strong\u003e The 24-bit single-turn absolute encoder supports position feedback. Multi-turn position tracking requires the specified battery arrangement; verify the manufacturer's retention and startup procedures.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMechanical transmission:\u003c\/strong\u003e The keyed shaft suits compatible couplings, pulleys, or other keyed transmission components. Check shaft dimensions, key fit, alignment, and allowable radial and axial loads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStopping and holding:\u003c\/strong\u003e This configuration has no holding brake. If a vertical axis or suspended load must remain stationary after power loss, engineer a separate load-holding solution.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnvironmental protection:\u003c\/strong\u003e The standard configuration has no shaft seal. Assess the installation environment and required protection before using it near washdown areas, lubricants, or airborne contaminants.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e04 | Suitable Equipment and Applications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eEquipment\u003c\/th\u003e\n\u003cth\u003eTypical Motion Task\u003c\/th\u003e\n\u003cth\u003eEngineering Checks\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAutomated assembly machines\u003c\/td\u003e\n\u003ctd\u003eIndexing, positioning, and repeatable component handling\u003c\/td\u003e\n\u003ctd\u003eCycle time, load inertia, acceleration, and repeatability requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging equipment\u003c\/td\u003e\n\u003ctd\u003eFeed control, synchronized movement, and rotary positioning\u003c\/td\u003e\n\u003ctd\u003ePeak torque, starts per minute, and thermal duty\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial-handling systems\u003c\/td\u003e\n\u003ctd\u003eControlled movement of machine sections and transfer mechanisms\u003c\/td\u003e\n\u003ctd\u003eTransmission ratio, external loads, and stopping behavior\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCNC auxiliary axes\u003c\/td\u003e\n\u003ctd\u003eServo-driven positioning and coordinated machine movement\u003c\/td\u003e\n\u003ctd\u003eDrive compatibility, feedback configuration, stiffness, and backlash\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRobotic fixtures and tooling\u003c\/td\u003e\n\u003ctd\u003eRotary actuation and fixture positioning\u003c\/td\u003e\n\u003ctd\u003eMounting geometry, shaft coupling, inertia matching, and collision loads\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConverting and processing machinery\u003c\/td\u003e\n\u003ctd\u003eFeed, indexing, and controlled rotary motion\u003c\/td\u003e\n\u003ctd\u003eContinuous torque demand, speed range, and process-cycle profile\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThese are potential application categories, not a guarantee of suitability for every machine. Final selection depends on the load profile, drive combination, mounting arrangement, operating environment, and required safety measures.\u003c\/p\u003e\n\n\u003ch3\u003e05 | Installation and Commissioning Checklist\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVerify the hardware:\u003c\/strong\u003e Confirm the motor nameplate, complete model code, voltage class, power rating, encoder type, and shaft configuration.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCheck the mechanical interface:\u003c\/strong\u003e Confirm the 200 mm bolt-circle mounting arrangement, shaft and key dimensions, coupling fit, and alignment before applying power.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eValidate the drive:\u003c\/strong\u003e Use the manufacturer's supported motor configuration and verify the feedback interface, motor parameters, and applicable firmware requirements.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInspect the encoder setup:\u003c\/strong\u003e Follow the specified wiring and commissioning procedure. If multi-turn operation is needed, confirm the battery installation and status.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTest motion at low risk:\u003c\/strong\u003e Start with a controlled, low-speed movement where permitted by the machine procedure. Check direction, feedback response, mechanical interference, and abnormal noise.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eValidate the load cycle:\u003c\/strong\u003e Monitor current, following error, acceleration, stopping behavior, and motor temperature under representative operating conditions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReview power-loss behavior:\u003c\/strong\u003e Because this model has no holding brake, verify that the machine can safely manage gravity loads and unexpected loss of servo power.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003e06 | Field Diagnostics: Symptoms and Checks\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eObserved Symptom\u003c\/th\u003e\n\u003cth\u003ePossible Cause\u003c\/th\u003e\n\u003cth\u003eRecommended Diagnostic Action\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDrive does not recognize the motor\u003c\/td\u003e\n\u003ctd\u003eIncorrect motor selection, unsupported feedback configuration, or wiring issue\u003c\/td\u003e\n\u003ctd\u003eCheck the drive's supported motor list, configured catalog number, feedback connections, and drive fault history.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePosition feedback is unavailable or unstable\u003c\/td\u003e\n\u003ctd\u003eEncoder cable fault, connector issue, electrical interference, or incorrect setup\u003c\/td\u003e\n\u003ctd\u003eInspect the feedback cable and connectors, review diagnostic codes, and verify the approved grounding and routing practices.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePosition shifts after power cycling\u003c\/td\u003e\n\u003ctd\u003eMulti-turn battery issue, incorrect feedback setup, or a mismatch between expected and actual position-retention behavior\u003c\/td\u003e\n\u003ctd\u003eCheck battery status and the manufacturer's encoder retention procedure. Confirm the required homing or position-validation sequence.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMotor trips during acceleration\u003c\/td\u003e\n\u003ctd\u003eHigh reflected inertia, excessive acceleration, mechanical binding, or drive-current limitation\u003c\/td\u003e\n\u003ctd\u003eReview the motion profile, load inertia, coupling alignment, current limits, and the drive's recorded fault information.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMotor runs hot during normal production\u003c\/td\u003e\n\u003ctd\u003eExcessive RMS torque demand, frequent cycling, poor mechanical alignment, or inadequate cooling conditions\u003c\/td\u003e\n\u003ctd\u003eCompare the measured duty cycle with the motor ratings, inspect the transmission, and review the manufacturer's thermal limits.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAxis moves unexpectedly when power is removed\u003c\/td\u003e\n\u003ctd\u003eNo holding brake in this motor configuration or inadequate external load restraint\u003c\/td\u003e\n\u003ctd\u003eSecure the machine, assess the load-holding design, and implement an appropriate engineered restraint or braking solution.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAbnormal vibration or noise\u003c\/td\u003e\n\u003ctd\u003eMisalignment, loose mounting, damaged coupling, resonance, or excessive load\u003c\/td\u003e\n\u003ctd\u003eInspect mounting fasteners and transmission components. Check vibration across the operating speed range and review the motion profile.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eDiagnostic safety:\u003c\/strong\u003e Isolate hazardous energy before inspecting wiring or mechanical components. Secure gravity-loaded axes before releasing the servo, and follow the machine's lockout and verification procedures. Use drive fault codes and the applicable manufacturer's manuals to confirm the root cause.\u003c\/p\u003e\n\n\u003ch3\u003e07 | Global PLC Spare HUB's Insight\u003c\/h3\u003e\n\u003cp\u003eFor servo motor replacement, matching power and frame size alone is not sufficient. The feedback interface, shaft geometry, drive support, and machine stopping requirements can determine whether a replacement is suitable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor maintenance teams:\u003c\/strong\u003e Record the full catalog number and existing drive configuration before removing the installed motor. Photograph connector arrangements and note the machine's established commissioning parameters.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor controls engineers:\u003c\/strong\u003e Verify encoder compatibility and the handling of absolute position after power cycling. Do not assume that a single-turn encoder retains multi-turn position without the required battery arrangement.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor mechanical engineers:\u003c\/strong\u003e Confirm shaft and key dimensions, flange geometry, alignment, and allowable shaft loads. A matching frame designation does not independently establish mechanical interchangeability.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor machine safety:\u003c\/strong\u003e The specified motor has no holding brake. Evaluate vertical loads, stored mechanical energy, and safe stopping requirements separately from the servo's positioning function.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis engineering review is intended to support preliminary selection and replacement planning. Verify all electrical, mechanical, and control-system details against the applicable manufacturer documentation before installation.\u003c\/p\u003e\n\n\u003ch3\u003e08 | Global PLC Spare HUB Review\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eAllen-Bradley TLP-B200-300-DJMD2A\u003c\/strong\u003e is worth evaluating when a machine requires a 3.0 kW TL-Series servo motor with a 400 V-class configuration, keyed shaft, and absolute encoder feedback. Its stated 28.7 N·m continuous stall torque provides a useful starting point for load assessment.\u003c\/p\u003e\n\u003cp\u003eBefore purchase, confirm the supported servo drive, encoder and battery requirements, shaft dimensions, mounting interface, and absence of a holding brake. These checks help reduce the risk of receiving a motor that matches the headline rating but does not meet the machine's integration requirements.\u003c\/p\u003e\n\n\u003ch3\u003e09 | Warranty and Shipping\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month warranty, subject to the applicable seller warranty terms.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipping options:\u003c\/strong\u003e FedEx, UPS, or DHL, subject to destination and service availability.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBefore ordering:\u003c\/strong\u003e Provide the complete part number and, where possible, the existing drive model and application details for a compatibility review.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuotation:\u003c\/strong\u003e Contact Global PLC Spare HUB for current pricing, availability, and order details.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e10 | Frequently Asked Questions\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ1: Is the TLP-B200-300-DJMD2A a direct replacement for another 3.0 kW servo motor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Not necessarily. Compare the full catalog number, drive compatibility, encoder interface, mounting dimensions, shaft and key geometry, and motor performance data. A matching power rating does not confirm drop-in compatibility.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ2: What should I check if the axis loses its expected position after a power cycle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e First, determine whether the application depends on multi-turn absolute position. This configuration requires a battery for multi-turn capability. Check battery status, encoder configuration, drive diagnostics, and the manufacturer's position-retention procedure before changing machine parameters.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ3: Can this motor safely hold a vertical load when the servo drive is disabled?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The specified configuration has no holding brake. Do not rely on motor torque alone to secure a gravity-loaded axis when power is removed. Use an appropriately engineered load-holding device and validate the machine's safety requirements.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ4: How do I determine whether 28.7 N·m is enough for my machine?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Calculate the torque required during acceleration, steady motion, and deceleration, including reflected inertia, friction, transmission efficiency, and external loads. Then compare the full operating profile with the manufacturer's continuous and peak torque curves. Continuous stall torque alone cannot establish suitability across the speed range.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ5: What information should I provide when requesting a quotation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Provide the full model number, required quantity, destination country, existing servo drive model, and any available nameplate or installation details. If replacing a failed unit, include the fault symptoms and application duty cycle. This information helps the supplier review the requested configuration and potential compatibility concerns.\u003c\/p\u003e\n\n\u003ch3\u003eRequest Pricing and Compatibility Support\u003c\/h3\u003e\n\u003cp\u003eContact Global PLC Spare HUB with your required quantity and application details for the \u003cstrong\u003eAllen-Bradley TLP-B200-300-DJMD2A\u003c\/strong\u003e. Our team can help review the model identification and key integration requirements before you place an order.\u003c\/p\u003e\n","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":67716322689206,"sku":"TLP-B200-300-DJMD2A","price":154.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/TLP-B200-300-DJMD2A-3.jpg?v=1792640724","url":"https:\/\/www.plcsparehub.com\/products\/tlp-b200-300-djmd2a-allen-bradley-tl-series-3-0-kw-servo-motor","provider":"Global PLC Spare Hub","version":"1.0","type":"link"}