{"product_id":"mdx61b-0014-5a3-4-00-sew-eurodrive-4-quadrant-ac-drive","title":"MDX61B-0014-5A3-4-00 SEW-Eurodrive 4-Quadrant AC Drive","description":"\n\u003ch3\u003e\u003cb\u003eMDX61B-0014-5A3-4-00 | SEW MOVIDRIVE MDX61B Inverter Drive\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSEW-Eurodrive MDX61B-0014-5A3-4-00\u003c\/strong\u003e is a MOVIDRIVE MDX61B inverter drive for three-phase motor control. This configuration specifies a 380–500 V AC supply, line-side C2 radio interference suppression, four-quadrant operation, and an integrated brake chopper.\u003c\/p\u003e\n\n\u003cp\u003eThe MDX61B platform supports optional expansion cards. Depending on the selected card and system configuration, these can add functions such as encoder feedback or fieldbus communication. Confirm the installed card and firmware before planning integration or replacement.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cb\u003eModel Code Map | Configuration Breakdown\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003cth\u003eConfiguration element\u003c\/th\u003e\n\u003cth\u003eMeaning\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMDX61\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eMOVIDRIVE MDX61 inverter drive; options can be installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVersion\u003c\/td\u003e\n\u003ctd\u003eVersion B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e0014\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePower code\u003c\/td\u003e\n\u003ctd\u003eRecommended motor power code; supplied product data identifies 1.4 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e5\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e380–500 V AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRadio interference suppression\u003c\/td\u003e\n\u003ctd\u003eLine-side C2 category\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e3\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eThree-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOperating quadrants\u003c\/td\u003e\n\u003ctd\u003eFour-quadrant operation, with brake chopper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e00\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eStandard version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eComplete model:\u003c\/strong\u003e MDX61B-0014-5A3-4-00\u003c\/p\u003e\n\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification supplied\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eSEW-Eurodrive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct family\u003c\/td\u003e\n\u003ctd\u003eMOVIDRIVE MDX61B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eInverter drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVersion\u003c\/td\u003e\n\u003ctd\u003eB, standard type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e0M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e380–500 V AC, three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended motor power\u003c\/td\u003e\n\u003ctd\u003eModel code indicates 1.4 kW; supplied technical data also lists 1.5 kW for constant load and 2.2 kW for variable torque\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal output current\u003c\/td\u003e\n\u003ctd\u003e4 A with overload reserve; 5 A without overload reserve, according to supplied data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuadrant operation\u003c\/td\u003e\n\u003ctd\u003e4-quadrant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraking\u003c\/td\u003e\n\u003ctd\u003eIntegrated brake chopper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRadio interference suppression\u003c\/td\u003e\n\u003ctd\u003eLine-side C2 category\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExpansion card support\u003c\/td\u003e\n\u003ctd\u003eOptional cards; examples supplied include DER11B and DFD11B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W × H × D)\u003c\/td\u003e\n\u003ctd\u003e95 × 317 × 260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eEngineering verification:\u003c\/strong\u003e The supplied data gives different motor-power figures: the model code states 1.4 kW, while the technical section lists 1.5 kW for constant load and 2.2 kW for variable torque. Verify the exact drive rating, output current, overload duty, and motor nameplate against the SEW documentation before sizing or commissioning.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cb\u003eDrive Architecture and Integration\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003cp\u003eThe drive controls a compatible three-phase motor from its AC input. Four-quadrant capability and the integrated brake chopper support applications that require controlled deceleration and braking energy management. The exact braking arrangement must still be checked against the application and drive manual.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor matching:\u003c\/strong\u003e Check motor voltage, rated current, power, speed, and duty against the drive’s documented ratings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeedback options:\u003c\/strong\u003e If closed-loop control is required, verify the installed encoder or resolver option and its compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFieldbus integration:\u003c\/strong\u003e Confirm the actual communication card, network protocol, parameter set, and controller interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMC installation:\u003c\/strong\u003e Follow the manufacturer’s wiring, grounding, shielding, and cable-routing instructions for the stated C2 configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel fit:\u003c\/strong\u003e Allow for the listed dimensions, required clearances, ventilation, cable bend radius, and access for service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cb\u003eSuitable Equipment and Application Scenarios\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003cp\u003eSubject to motor and system compatibility, this drive configuration can be considered for industrial machinery requiring variable-speed control and controlled braking.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConveyors and material handling:\u003c\/strong\u003e Speed regulation and deceleration where the selected motor and load fall within the drive ratings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging and production machinery:\u003c\/strong\u003e Motor-speed control in machine sections that require repeatable acceleration and stopping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHoisting or cyclic loads:\u003c\/strong\u003e Potential use where four-quadrant operation is required; verify the complete drive, motor, braking, and safety design for the duty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcess machinery:\u003c\/strong\u003e Speed control for compatible pumps, fans, mixers, or other driven equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomated machine systems:\u003c\/strong\u003e Integration with a controller through the drive’s supported control interface or an appropriate optional card.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThese are application examples, not confirmation of suitability for every machine. Regenerative energy handling, braking duty, safety functions, and motor-control mode require application-specific engineering.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cb\u003eDiagnostics and Troubleshooting Approach\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003cp\u003eUse the drive’s displayed fault information, parameter diagnostics, and applicable SEW service documentation. The supplied product details do not identify specific fault codes or diagnostic functions, so fault meanings should not be inferred.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSymptom\u003c\/th\u003e\n\u003cth\u003eInitial engineering checks\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive does not start\u003c\/td\u003e\n\u003ctd\u003eCheck the incoming supply, control enable, command source, drive status, and active fault indication.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor trips during acceleration\u003c\/td\u003e\n\u003ctd\u003eReview motor data, acceleration time, load inertia, current limits, and the drive’s recorded fault.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC bus or braking-related fault\u003c\/td\u003e\n\u003ctd\u003eInspect the deceleration profile, braking duty, brake-chopper arrangement, and installation requirements in the manual.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication is unavailable\u003c\/td\u003e\n\u003ctd\u003eIdentify the installed option card, verify its network configuration, and check controller-side communication status.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor speed or response is incorrect\u003c\/td\u003e\n\u003ctd\u003eCheck the control mode, motor parameters, reference scaling, feedback configuration, and command source.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eBefore troubleshooting, follow site electrical-safety procedures and isolate hazardous energy as required. Do not remove covers or test internal circuits while energized unless the manufacturer’s procedure explicitly permits it.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cb\u003eGlobal PLC Spare HUB's Insight\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003cp\u003eFor a replacement, match the complete order code and compare the installed unit’s rating label. The suffix determines important electrical and functional characteristics; a similar-looking MDX61B drive may not have the same supply, suppression, braking, or option configuration.\u003c\/p\u003e\n\n\u003cp\u003eMotor selection should be based on the drive’s verified current and overload duty—not power alone. If the application includes frequent deceleration, confirm braking energy and duty-cycle limits. If the machine uses encoder feedback or fieldbus control, verify the actual option cards before ordering.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cb\u003eWarranty and Shipping\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e SEW-Eurodrive MDX61B-0014-5A3-4-00 inverter drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping carriers:\u003c\/strong\u003e FedEx, UPS, and DHL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDispatch estimate:\u003c\/strong\u003e Typically 24–48 hours after order processing, subject to stock and order confirmation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder verification:\u003c\/strong\u003e Provide the full part number, motor nameplate data, and any installed option-card details when requesting a quote.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ1: What should I compare between the old drive and the replacement before installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompare the full order code, voltage class, current rating, overload duty, brake-chopper specification, suppression category, size, and installed option cards. Also check the firmware and parameter backup where relevant.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ2: Is the 1.4 kW model-code value sufficient to select a motor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The supplied information contains differing power figures. Confirm the official rating for this exact drive and select against motor rated current, load profile, and overload requirements.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ3: What information helps determine whether the drive can handle frequent braking?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProvide the load inertia, speed, stopping time, cycle frequency, motor data, and braking duty. Use these details to check the brake-chopper and braking-energy limits in the manufacturer’s documentation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ4: How can I confirm that a communication or feedback option will work with my machine?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIdentify the installed option-card part number and required protocol or feedback type. Check compatibility with the drive revision, controller, network configuration, and application software.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ5: What is a useful first step when a drive replacement causes a machine fault?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCapture the exact fault indication and compare the replacement’s parameter set with the original. Then check motor data, command source, feedback setup, and wiring before changing tuning parameters.\u003c\/p\u003e\n","brand":"SEW-EURODRIVE","offers":[{"title":"Default Title","offer_id":67740284911798,"sku":"MDX61B-0014-5A3-4-00","price":163.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/MDX61B-0014-5A3-4-00-3.jpg?v=1792741480","url":"https:\/\/www.plcsparehub.com\/products\/mdx61b-0014-5a3-4-00-sew-eurodrive-4-quadrant-ac-drive","provider":"Global PLC Spare Hub","version":"1.0","type":"link"}