{"product_id":"honeywell-05701-a-0325-24vdc-rack-power-input-module","title":"Honeywell 05701-A-0325 24VDC Rack Power Input Module","description":"\u003ch3\u003e\u003cstrong\u003eProduct Introduction\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHoneywell 05701-A-0325\u003c\/strong\u003e is a DC Input Card designed for the \u003cstrong\u003eHoneywell System 57\u003c\/strong\u003e gas detection platform. It provides the primary 24VDC power connection for the system sub-rack. The card accepts an external nominal 24VDC supply and distributes power through the Engineering Card and backplane. This arrangement supplies the operating voltage required by compatible rack modules. The integrated fuse protects the incoming DC supply circuit. RFI filtering helps reduce electrical interference from the power input. Reverse polarity protection adds another layer of protection against incorrect supply connections. The card also supports an auxiliary DC connection for a standby backup battery. Isolation diodes separate the main PSU input from the auxiliary supply. This arrangement supports backup power integration without directly connecting both supply circuits. A two-part terminal block, designated TB1, simplifies field wiring. Technicians can remove the card without disconnecting every individual wire.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e05701-A-0325\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eDC Input Card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Series\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem 57\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Input\u003c\/td\u003e\n\u003ctd\u003eNominal 24VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Distribution\u003c\/td\u003e\n\u003ctd\u003eEngineering Card and sub-rack backplane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Protection\u003c\/td\u003e\n\u003ctd\u003eIntegrated fuse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity Protection\u003c\/td\u003e\n\u003ctd\u003eReverse polarity protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEMC Protection\u003c\/td\u003e\n\u003ctd\u003eRFI filtering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAuxiliary Input\u003c\/td\u003e\n\u003ctd\u003eStandby backup battery connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Isolation\u003c\/td\u003e\n\u003ctd\u003eDiode isolation between PSU and AUX connections\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Interface\u003c\/td\u003e\n\u003ctd\u003eTwo-part terminal block TB1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Platform\u003c\/td\u003e\n\u003ctd\u003eHoneywell System 57\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cstrong\u003ePower Supply Architecture and System Integration\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e05701-A-0325\u003c\/strong\u003e distributes incoming DC power through the System 57 sub-rack. Its power architecture includes three main functions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary power input:\u003c\/strong\u003e Accepts an external nominal 24VDC supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRack power distribution:\u003c\/strong\u003e Routes DC power through the Engineering Card and backplane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuxiliary power input:\u003c\/strong\u003e Supports a separate standby battery connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe PSU and AUX inputs use isolation diodes. This arrangement separates the two supply paths electrically. For installations with more than eight \u003cstrong\u003e5704 Catalytic Cards\u003c\/strong\u003e, Honeywell recommends a specific power arrangement. In this configuration:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the Control Cards through their associated Quad Relay Interface Cards.\u003c\/li\u003e\n\u003cli\u003eUse the \u003cstrong\u003e05701-A-0325\u003c\/strong\u003e to power the Engineering Card only.\u003c\/li\u003e\n\u003cli\u003eFollow the rack wiring documentation when distributing the remaining loads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis arrangement helps prevent excessive current flow through the rack backplane.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eCompatible AC\/DC Power Supply Units\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eHoneywell specifies two rack-mounted AC-to-DC power supply units for System 57 installations.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Supply Model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e05701-A-0406\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e05701-A-0405\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e8-way supply unit\u003c\/td\u003e\n\u003ctd\u003e16-way supply unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRack Format\u003c\/td\u003e\n\u003ctd\u003e1U, half-width, 19-inch rack mounting\u003c\/td\u003e\n\u003ctd\u003e1U, 19-inch rack mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Module\u003c\/td\u003e\n\u003ctd\u003eSingle 50W switched-mode module\u003c\/td\u003e\n\u003ctd\u003eSingle 50W switched-mode module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Input\u003c\/td\u003e\n\u003ctd\u003e85–264VAC\u003c\/td\u003e\n\u003ctd\u003e85–264VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Frequency\u003c\/td\u003e\n\u003ctd\u003e47–440Hz\u003c\/td\u003e\n\u003ctd\u003e47–440Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC Input\u003c\/td\u003e\n\u003ctd\u003e110–340VDC\u003c\/td\u003e\n\u003ctd\u003e110–340VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThese units provide the AC-to-DC conversion required by compatible System 57 installations. Confirm the supply configuration before selecting a replacement or additional power unit.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Guidelines\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eCorrect installation helps maintain stable power distribution across the System 57 rack.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVerify the card model against the rack configuration before installation.\u003c\/li\u003e\n\u003cli\u003eConfirm the external supply provides nominal 24VDC.\u003c\/li\u003e\n\u003cli\u003eIsolate the rack power before handling electrical connections.\u003c\/li\u003e\n\u003cli\u003eCheck the TB1 terminal assignments against the official wiring diagram.\u003c\/li\u003e\n\u003cli\u003eConnect the primary PSU input with correct polarity.\u003c\/li\u003e\n\u003cli\u003eConnect the auxiliary battery supply only when the application requires it.\u003c\/li\u003e\n\u003cli\u003eInspect the backplane connector for contamination or physical damage.\u003c\/li\u003e\n\u003cli\u003eSecure the card correctly within its designated rack position.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor racks containing more than eight \u003cstrong\u003e5704 Catalytic Cards\u003c\/strong\u003e, follow Honeywell's recommended power distribution arrangement.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eCommissioning and Maintenance\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eCommissioning should verify both the incoming supply and rack power distribution.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage:\u003c\/strong\u003e Measure the incoming DC supply before energizing the rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolarity:\u003c\/strong\u003e Verify positive and negative connections at TB1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuse inspection:\u003c\/strong\u003e Check the input fuse if the rack receives no power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuxiliary supply:\u003c\/strong\u003e Verify backup battery connections when installed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackplane inspection:\u003c\/strong\u003e Check connector seating and signs of overheating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterference:\u003c\/strong\u003e Investigate unstable operation when electrical noise affects the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad distribution:\u003c\/strong\u003e Review backplane loading when expanding the detector configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe removable two-part TB1 terminal block simplifies maintenance. Technicians can remove the card without individually disconnecting all field wires. Always isolate the power source before replacing the card or inspecting its connections.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eCompatibility and Selection Considerations\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e05701-A-0325\u003c\/strong\u003e serves as a DC power input interface within the Honeywell System 57 platform. It is not a general-purpose DC input signal acquisition module. Before purchasing, verify the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem compatibility:\u003c\/strong\u003e Confirm that the existing sub-rack supports this System 57 card.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage requirements:\u003c\/strong\u003e Check the nominal 24VDC rack supply specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower configuration:\u003c\/strong\u003e Review the number and types of installed rack modules.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackup requirements:\u003c\/strong\u003e Determine whether the installation needs an auxiliary battery connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRack loading:\u003c\/strong\u003e Check the recommended arrangement for installations exceeding eight 5704 Catalytic Cards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply selection:\u003c\/strong\u003e Confirm whether the 05701-A-0405 or 05701-A-0406 suits the rack configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not select this card based only on its 24VDC rating. Verify the complete rack architecture and electrical connections.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eEngineering Advantages\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentralized power distribution:\u003c\/strong\u003e Routes incoming DC power through the rack backplane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput circuit protection:\u003c\/strong\u003e Combines fuse protection and reverse polarity protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical interference control:\u003c\/strong\u003e Includes RFI filtering at the power input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackup supply support:\u003c\/strong\u003e Provides auxiliary DC input connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply separation:\u003c\/strong\u003e Uses diodes to isolate PSU and AUX connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance efficiency:\u003c\/strong\u003e Features a removable two-part TB1 terminal block.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Honeywell \u003cstrong\u003e05701-A-0325 DC Input Card\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eProduct identification and packing documentation, where supplied\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ1: What is the primary function of the Honeywell 05701-A-0325?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe card accepts nominal 24VDC power and distributes it throughout the System 57 sub-rack. It also provides input protection and auxiliary power connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ2: Can the 05701-A-0325 power all Control Cards directly?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot in every rack configuration. Honeywell recommends powering Control Cards through their associated Quad Relay Interface Cards when installations contain more than eight 5704 Catalytic Cards. The DC Input Card should then power the Engineering Card only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ3: What should engineers check when the System 57 rack does not power up?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStart by measuring the incoming 24VDC supply. Next, inspect the TB1 wiring, input fuse, card seating, and backplane connections. Also check the auxiliary supply arrangement when backup power is installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ4: Can technicians remove the card without disconnecting every wire?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The two-part TB1 terminal block supports convenient card removal. Follow the correct isolation procedure before removing the card.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ5: How should buyers select the correct System 57 power configuration?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCheck the rack size, installed detector cards, total power demand, and backup battery requirements. Also verify compatibility with the 05701-A-0405 or 05701-A-0406 power supply unit. Consult the rack wiring documentation before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ6: Does the 05701-A-0325 provide RFI and reverse polarity protection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The card incorporates RFI filtering and reverse polarity protection. These features help protect the DC input circuit against electrical interference and incorrect supply connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ7: Does Honeywell specify operating temperature or environmental ratings for this card?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe available product information does not specify operating temperature, humidity, or enclosure protection ratings. Check the official System 57 technical documentation before applying the card in demanding environments.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eOrdering and Technical Support\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHoneywell 05701-A-0325 System 57 DC Input Card\u003c\/strong\u003e supports reliable power distribution in industrial gas detection systems. Contact our team to confirm model compatibility, rack configuration, and current availability. We provide technical assistance for industrial automation spare parts and replacement selection.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/05701-A-0325.png?v=1795059422\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":45013997551798,"sku":"05701-A-0325","price":132.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/05701-A-0325_5839e81c-bb40-4251-b415-ed355c6894e2.jpg?v=1795059402","url":"https:\/\/www.plcsparehub.com\/products\/honeywell-05701-a-0325-24vdc-rack-power-input-module","provider":"Global PLC Spare Hub","version":"1.0","type":"link"}