{"product_id":"3500-15-133292-01-bently-nevada-dc-power-supply-module","title":"3500\/15 133292-01 Bently Nevada DC Power Supply Module","description":"\u003ch3\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e3500\/15 133292-01\u003c\/strong\u003e is a high-reliability Low Voltage DC Power Supply Module designed by \u003cstrong\u003eBently Nevada\u003c\/strong\u003e for the flagship \u003cstrong\u003e3500 Machinery Protection System\u003c\/strong\u003e. Engineered to accept a 20 to 30 V DC input voltage range, this power unit converts industrial DC buses into stable internal voltages required by rack monitoring cards. Supporting full-rack current draws up to 11.0 A maximum, it features robust over-voltage fuse protection and supports dual-module redundant configurations for continuous, mission-critical turbomachinery surveillance.\u003c\/p\u003e\n\u003ch3\u003ePart Number \u0026amp; Configuration Breakdown\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries Platform:\u003c\/strong\u003e \u003cstrong\u003e3500\u003c\/strong\u003e Machinery Protection System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule Type Code:\u003c\/strong\u003e \u003cstrong\u003e3500\/15\u003c\/strong\u003e (Power Supply Series)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExact Part Number \/ Model:\u003c\/strong\u003e \u003cstrong\u003e133292-01\u003c\/strong\u003e (Low Voltage DC Power Supply Option)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e \u003cstrong\u003eBently Nevada\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New \u0026amp; Original in Factory Packing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications Matrix\u003c\/h3\u003e\n\u003ch4\u003e1. Electrical Input \u0026amp; Current Parameters\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage Range:\u003c\/strong\u003e 20 to 30 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Rack Current Draw:\u003c\/strong\u003e Up to 11.0 A maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Rack Load:\u003c\/strong\u003e None required (stable operation at zero load)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-of-Range Protection:\u003c\/strong\u003e Under-voltage conditions cause no harm to supply or Power Input Module (PIM); over-voltage conditions trigger an open circuit on the PIM fuse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e2. Physical \u0026amp; Mechanical Dimensions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply Module Dimensions (H x W x D):\u003c\/strong\u003e 120.7 mm × 50.8 mm × 251.5 mm (4.75 in × 2.0 in × 9.9 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule Net Weight:\u003c\/strong\u003e 1.39 kg (3.06 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRack Space Allocation:\u003c\/strong\u003e Occupies two half-height slots located on the far left side of the 3500 rack. Supports dual redundant power supplies by utilizing both slots simultaneously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssociated Hardware:\u003c\/strong\u003e Special half-height Power Input Module (PIM) positioned directly behind the power supply module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e3. Environmental Limits \u0026amp; Thermal Envelope\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range:\u003c\/strong\u003e -30 °C to +65 °C (-22 °F to +150 °F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage Temperature Range:\u003c\/strong\u003e -40 °C to +85 °C (-40 °F to +185 °F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelative Humidity:\u003c\/strong\u003e Up to 95% non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e4. Compliance \u0026amp; Certifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectromagnetic Compatibility (EMC):\u003c\/strong\u003e EMC Directive 2014\/30\/EU (Standards: EN 61000-6-2 immunity, EN 61000-6-4 emissions)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Safety:\u003c\/strong\u003e Low Voltage Directive 2014\/35\/EU (Standard: EN 61010-1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental \u0026amp; Hazardous:\u003c\/strong\u003e RoHS Directive 2011\/65\/EU; FCC Part 15 compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine \u0026amp; Offshore Approvals:\u003c\/strong\u003e DNV GL rules for classification of ships, offshore units, and high-speed craft; ABS Rules for Condition of Classification (Steel Vessels Rules \u0026amp; Offshore Units)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation \u0026amp; Wiring Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePIM Rear Termination:\u003c\/strong\u003e Ensure the Low Voltage DC Power Input Module is securely fastened to the backplane before sliding the front supply module into position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Cabling:\u003c\/strong\u003e Connect incoming 24 V DC plant supply lines to the designated screw terminals on the rear PIM, maintaining proper wire gauge sizing to prevent voltage drop over long cable runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedundant Setup:\u003c\/strong\u003e When deploying dual power supplies for redundancy, feed each module from independent DC distribution breakers to maintain system availability during a power feed failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDiagnostic Capabilities \u0026amp; Front-Panel Indicators\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply OK LED:\u003c\/strong\u003e A front-panel green LED illuminates steadily when internal DC rails are operating within normal voltage thresholds. If unlit or flashing, it signals internal rail failure or an open input fuse on the PIM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuse Diagnostics:\u003c\/strong\u003e An over-voltage spike will blow the rear PIM input fuse, instantly cutting power to that specific supply slot while allowing a redundant secondary supply to maintain uninterrupted rack operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGlobal PLC Spare HUB's Insight \u0026amp; Expert Guidance\u003c\/h3\u003e\n\u003cp\u003eGlobal PLC Spare HUB's Insight highlights that low-voltage DC power architectures in industrial plants are susceptible to voltage sags during heavy motor startups. When installing the \u003cstrong\u003e3500\/15 133292-01\u003c\/strong\u003e, verify that your plant DC source stays strictly within the 20 to 30 V DC window; prolonged operation below 20 V DC can cause intermittent rack resets, while spikes above 30 V DC will sacrifice the PIM input fuse.\u003c\/p\u003e\n\u003ch3\u003eCompatible Equipment \u0026amp; Target Application Scenarios\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Equipment:\u003c\/strong\u003e Bently Nevada 3500 racks, 3500 Power Input Modules (PIM), and all 3500 monitor channel cards (such as 3500\/42M, 3500\/22M).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTarget Application Scenarios:\u003c\/strong\u003e Oil and gas compressor stations, offshore drilling production platforms, maritime propulsion turbine monitoring rooms, and critical petrochemical plant power distribution units requiring clean 24 V DC system backup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLogistics, Fulfillment \u0026amp; Warranty Protection\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Carriers:\u003c\/strong\u003e Express global dispatch via \u003cstrong\u003eFedEx\u003c\/strong\u003e, \u003cstrong\u003eUPS\u003c\/strong\u003e, and \u003cstrong\u003eDHL\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFulfillment Speed:\u003c\/strong\u003e Guaranteed processing and dispatch within 24 to 48 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty Terms:\u003c\/strong\u003e Fully backed by a 12-month factory replacement or repair warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProfessional Frequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat happens to the 3500 rack if the input voltage drops below 20 V DC?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe power supply module will experience an under-voltage state without incurring hardware damage, but internal DC rails may drop out and trigger rack monitoring card fault flags.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I hot-swap the 3500\/15 133292-01 module while the machinery protection system is live?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the 3500 system architecture supports hot-swapping of power supply modules, provided a secondary redundant power supply is installed and active in the adjacent rack slot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy did the input fuse blow on the rear Power Input Module (PIM)?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA blown PIM fuse is almost always caused by an over-voltage transient exceeding the 30 V DC maximum limit on the incoming plant power feed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the best selection guidelines when upgrading an AC power rack to DC power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEnsure your facility has a stable DC distribution source capable of supplying up to 11.0 A per rack, and verify that you replace both the front power module and the rear PIM matching the -01 low voltage DC specification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I verify if a redundant power supply configuration is sharing the load correctly?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCheck the system event list via the 3500 configuration software or inspect the individual front-panel Supply OK LEDs on both modules to ensure both units are active and healthy.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45013936930998,"sku":"133292-01","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/3500-15133292-01_d263cedc-f8e3-4f8a-b52d-74f99e86e879.jpg?v=1787039592","url":"https:\/\/www.plcsparehub.com\/products\/3500-15-133292-01-bently-nevada-dc-power-supply-module","provider":"Global PLC Spare Hub","version":"1.0","type":"link"}