{"product_id":"330180-50-05-bently-nevada-3300-xl-proximitor-transducer","title":"330180-50-05 Bently Nevada 3300 XL Proximitor Transducer","description":"\u003ch3\u003e\u003cstrong\u003e330180-50-05 | 3300 XL Proximitor Sensor Engineering Profile\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330180-50-05\u003c\/strong\u003e is a \u003cstrong\u003e3300 XL Proximitor Sensor\u003c\/strong\u003e designed for non-contact displacement measurement systems. It interfaces with compatible Bently Nevada proximity probes and extension cables to provide a conditioned output signal for machinery monitoring.\u003c\/p\u003e\n\u003cp\u003eThis configuration specifies a \u003cstrong\u003e5.0-meter system length\u003c\/strong\u003e, panel mounting, and the \u003cstrong\u003eCSA, ATEX, and IECEx approval option\u003c\/strong\u003e. Its compact housing supports high-density installation layouts, while SpringLoc terminals simplify field wiring.\u003c\/p\u003e\n\u003cp\u003eThe sensor also provides strong radio-frequency and electromagnetic interference immunity. Its isolated mounting base reduces the need for separate isolator plates in suitable installations.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Identification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct series\u003c\/td\u003e\n\u003ctd\u003e3300 XL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eProximitor Sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComplete part number\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e330180-50-05\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eU.S.A., according to the supplied product information\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem length\u003c\/td\u003e\n\u003ctd\u003e5.0 m (16.4 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting configuration\u003c\/td\u003e\n\u003ctd\u003ePanel mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAgency approval option\u003c\/td\u003e\n\u003ctd\u003eCSA, ATEX, IECEx\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct condition\u003c\/td\u003e\n\u003ctd\u003eNew and original, factory packing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e12 months, subject to confirmed sales terms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cstrong\u003eConfiguration Breakdown | Decode the Ordering Number\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe ordering code identifies the system length, mounting arrangement, and approval selection. Verify the complete code before replacing an installed sensor.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCode segment\u003c\/th\u003e\n\u003cth\u003eMeaning\u003c\/th\u003e\n\u003cth\u003eEngineering significance\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e330180\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3300 XL Proximitor Sensor model\u003c\/td\u003e\n\u003ctd\u003eIdentifies the sensor family and associated transducer interface.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-50\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.0 m system length with panel mounting\u003c\/td\u003e\n\u003ctd\u003eDefines the specified transducer system length and mounting configuration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-05\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCSA, ATEX, IECEx approvals\u003c\/td\u003e\n\u003ctd\u003eIdentifies the selected approval option for applicable installations.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eOrdering advice:\u003c\/strong\u003e Confirm the existing probe type, extension cable, system length, mounting footprint, and required approvals. Similar-looking sensors may use different electrical characteristics or system configurations.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical Specification Matrix\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330180-50-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003e3300 XL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice function\u003c\/td\u003e\n\u003ctd\u003eProximitor sensor for a compatible proximity transducer system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem length\u003c\/td\u003e\n\u003ctd\u003e5.0 m (16.4 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting type\u003c\/td\u003e\n\u003ctd\u003ePanel mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible probe families\u003c\/td\u003e\n\u003ctd\u003e3300-series 5 mm probes and 3300 XL 8 mm probes, with compatible extension cables\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput supply voltage\u003c\/td\u003e\n\u003ctd\u003e−17.5 to −26 VDC under the specified nonincendive circuit conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply requirement with barriers\u003c\/td\u003e\n\u003ctd\u003e−23 to −26 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum supply current\u003c\/td\u003e\n\u003ctd\u003e12 mA under the specified nonincendive circuit conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply sensitivity\u003c\/td\u003e\n\u003ctd\u003eLess than 2 mV output change per 1 V input supply change\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput resistance\u003c\/td\u003e\n\u003ctd\u003e50 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor housing material\u003c\/td\u003e\n\u003ctd\u003eA308 aluminum, as specified in the supplied data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector material\u003c\/td\u003e\n\u003ctd\u003eGold-plated brass or gold-plated beryllium copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor weight\u003c\/td\u003e\n\u003ctd\u003e246 g (8.67 oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e−52°C to +100°C (−62°F to +212°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage temperature\u003c\/td\u003e\n\u003ctd\u003e−52°C to +105°C (−62°F to +221°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting base\u003c\/td\u003e\n\u003ctd\u003eProvides electrical isolation and supports the specified mounting arrangement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring terminals\u003c\/td\u003e\n\u003ctd\u003eSpringLoc terminal strips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterference immunity\u003c\/td\u003e\n\u003ctd\u003eHigh RFI\/EMI immunity, according to the supplied product description\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSupply voltage caution:\u003c\/strong\u003e The supplied documentation warns that operation above −23.5 VDC can reduce the linear range. Follow the applicable installation drawing and verify the required supply voltage for the actual circuit arrangement.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eSignal Conditioning and Electrical Interface\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe Proximitor Sensor forms the interface between a compatible proximity probe assembly and the machinery monitoring system. It conditions the probe response and supplies an output for the designated monitor input.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe input:\u003c\/strong\u003e Accepts specified 3300-series 5 mm and 3300 XL 8 mm proximity probes with compatible extension cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower input:\u003c\/strong\u003e Requires the negative DC supply specified for the installed circuit and barrier arrangement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput interface:\u003c\/strong\u003e Provides the signal required by a compatible machinery monitoring channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical isolation:\u003c\/strong\u003e The mounting base provides isolation under the specified installation arrangement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal stability:\u003c\/strong\u003e Low supply sensitivity helps limit output changes caused by supply variation within the specified conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring connection:\u003c\/strong\u003e SpringLoc terminals support tool-free conductor clamping when installed according to the terminal instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not assume universal compatibility with PLC analog inputs. Verify the sensor output characteristics, monitor input design, grounding scheme, and required signal conditioning before connecting external equipment.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Architecture and Field Wiring\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe panel-mount version shares a four-hole mounting footprint with older Proximitor Sensor designs. Confirm the exact mounting dimensions before using an existing panel layout.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect the mounting location.\u003c\/strong\u003e Check panel clearance, fastening points, ventilation, and the specified ambient temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfirm the system length.\u003c\/strong\u003e Verify the 5.0 m transducer configuration against the complete probe and extension cable arrangement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the supply circuit.\u003c\/strong\u003e Confirm polarity, negative supply voltage, current capacity, and barrier requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the conductors.\u003c\/strong\u003e Follow the applicable wiring drawing and terminal specifications for conductor size and stripping length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnect the wiring.\u003c\/strong\u003e Use the SpringLoc terminals according to the manufacturer's instructions. Check each conductor for secure retention.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect signal routing.\u003c\/strong\u003e Keep measurement wiring away from major electrical noise sources where practical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerify the channel.\u003c\/strong\u003e Check static output, monitor status, alarm configuration, and signal response before returning equipment to service.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe improved RFI\/EMI immunity can support installation in suitable fiberglass housings. It can also reduce reliance on special shielded conduit or metallic housings in appropriate installations. Follow site-specific electrical and hazardous-area requirements.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eTypical Equipment and Application Scenarios\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eEquipment\u003c\/th\u003e\n\u003cth\u003eMonitoring purpose\u003c\/th\u003e\n\u003cth\u003eEngineering considerations\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteam turbines\u003c\/td\u003e\n\u003ctd\u003eInterface for configured shaft vibration and displacement channels\u003c\/td\u003e\n\u003ctd\u003eMatch the probe family, system length, and monitoring channel.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGas turbines\u003c\/td\u003e\n\u003ctd\u003eSupport non-contact shaft measurement within a machinery protection system\u003c\/td\u003e\n\u003ctd\u003eVerify installation environment and required approvals.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCentrifugal compressors\u003c\/td\u003e\n\u003ctd\u003eProvide conditioned proximity signals for shaft condition monitoring\u003c\/td\u003e\n\u003ctd\u003eCheck probe compatibility and cable configuration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndustrial pumps\u003c\/td\u003e\n\u003ctd\u003eSupport proximity-based shaft monitoring where the design requires it\u003c\/td\u003e\n\u003ctd\u003eConfirm target geometry and the selected probe system.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndustrial machinery protection panels\u003c\/td\u003e\n\u003ctd\u003eInterface compatible proximity sensors with monitoring electronics\u003c\/td\u003e\n\u003ctd\u003eCheck power supply, panel footprint, and channel configuration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThese examples describe potential applications rather than universal machine compatibility. Confirm the installed transducer architecture before selecting a replacement sensor.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eDiagnostic Capability and Troubleshooting Workflow\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe sensor provides a conditioned measurement signal. The complete monitoring system uses that signal to assess shaft behavior and configured alarm conditions.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eObserved condition\u003c\/th\u003e\n\u003cth\u003ePossible causes\u003c\/th\u003e\n\u003cth\u003eRecommended checks\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput shifts after a power supply change\u003c\/td\u003e\n\u003ctd\u003eSupply voltage outside the preferred range or unstable supply\u003c\/td\u003e\n\u003ctd\u003eMeasure the supply at the sensor and verify the installation drawing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel reports an abnormal gap or displacement value\u003c\/td\u003e\n\u003ctd\u003eProbe mismatch, incorrect system length, wiring error, or target changes\u003c\/td\u003e\n\u003ctd\u003eVerify the complete transducer chain and compare the static reading with commissioning records.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntermittent signal during operation\u003c\/td\u003e\n\u003ctd\u003eLoose conductor, damaged cable, or connector problem\u003c\/td\u003e\n\u003ctd\u003eInspect terminal retention, cable integrity, and connector seating.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal becomes unstable near switching equipment\u003c\/td\u003e\n\u003ctd\u003eElectrical interference or grounding issues\u003c\/td\u003e\n\u003ctd\u003eReview cable routing, grounding, and nearby noise sources.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMonitor channel remains invalid after replacement\u003c\/td\u003e\n\u003ctd\u003eIncorrect model, incompatible probe, wiring mismatch, or channel configuration\u003c\/td\u003e\n\u003ctd\u003eCheck the part number, input type, wiring drawing, and monitor configuration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eField example:\u003c\/strong\u003e A compressor monitoring channel reports a different static reading after a sensor replacement. First, verify the model suffix and system length. Next, measure the supply voltage and inspect the field wiring. Then compare the probe gap and channel configuration with the commissioning records. This sequence helps isolate installation errors before engineers investigate machine damage.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eCommissioning and Maintenance Recommendations\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecord baseline values:\u003c\/strong\u003e Document the static output, supply voltage, channel status, and machine operating conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect terminals:\u003c\/strong\u003e Check SpringLoc conductor retention during scheduled maintenance or after wiring work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerify supply quality:\u003c\/strong\u003e Investigate supply changes before adjusting alarm limits or calibration settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReview cable routing:\u003c\/strong\u003e Check for abrasion, crushed sections, and routing near high-noise equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfirm replacement compatibility:\u003c\/strong\u003e Match the full ordering code and probe system before energizing the channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreserve configuration records:\u003c\/strong\u003e Record monitor settings and transducer details to support future fault isolation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eCertification and Installation Compliance\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e-05\u003c\/strong\u003e ordering suffix identifies the CSA, ATEX, and IECEx approval option in the supplied product information.\u003c\/p\u003e\n\u003cp\u003eVerify the actual certification documents, equipment markings, and installation drawing before use in a hazardous area. Confirm the applicable gas or dust classification, temperature class, and barrier requirements for the intended installation.\u003c\/p\u003e\n\u003cp\u003eApproval selection alone does not establish suitability for every hazardous location. The complete installation must meet the applicable site requirements.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eGlobal PLC Spare HUB's Insight\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eFrom a machinery protection perspective, the Proximitor Sensor should be selected as part of a complete transducer system. The sensor, probe, extension cable, power supply, and monitor must work together.\u003c\/p\u003e\n\u003cp\u003eDuring a planned shutdown, engineers sometimes replace a sensor because its housing and connector appear identical to the installed unit. However, differences in system length or probe compatibility can affect measurement performance. Checking the complete part number before installation reduces this risk.\u003c\/p\u003e\n\u003cp\u003eAnother practical consideration involves power supply adjustment. A sensor may operate outside its preferred supply range while producing an apparently usable signal. The supplied specifications warn that a more positive voltage than −23.5 VDC can reduce the linear range. Engineers should verify the required voltage before accepting the measurement channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelection priority:\u003c\/strong\u003e Confirm the system length, mounting configuration, probe compatibility, supply voltage, output interface, and approval requirements. These checks provide a stronger basis for replacement than visual similarity alone.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eModel Comparison and Replacement Advice\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eCompare the current model with the linked alternative before ordering. Both belong to the 3300 XL Proximitor Sensor family, but their complete configurations require verification.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSelection factor\u003c\/th\u003e\n\u003cth\u003eCurrent model\u003c\/th\u003e\n\u003cth\u003eAlternative model\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e330180-50-05\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/www.plcsparehub.com\/products\/330180-92-05-proximitor-transducer-3300-xl-series-bently-nevada\"\u003e\u003cstrong\u003e330180-92-05\u003c\/strong\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct family\u003c\/td\u003e\n\u003ctd\u003e3300 XL Proximitor Sensor\u003c\/td\u003e\n\u003ctd\u003e3300 XL series; verify the exact product configuration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem length\u003c\/td\u003e\n\u003ctd\u003e5.0 m (16.4 ft)\u003c\/td\u003e\n\u003ctd\u003eConfirm the meaning of option 92 in the applicable ordering documentation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting arrangement\u003c\/td\u003e\n\u003ctd\u003ePanel mount\u003c\/td\u003e\n\u003ctd\u003eVerify the mounting option before substitution.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApproval option\u003c\/td\u003e\n\u003ctd\u003e05 — CSA, ATEX, IECEx\u003c\/td\u003e\n\u003ctd\u003eConfirm the approval option and applicable certificates.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReplacement suitability\u003c\/td\u003e\n\u003ctd\u003eSuitable when the installed system requires this exact configuration\u003c\/td\u003e\n\u003ctd\u003eSuitable only when the verified electrical and mechanical configuration matches the application.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical recommendation:\u003c\/strong\u003e Select \u003cstrong\u003e330180-50-05\u003c\/strong\u003e when the installation requires the specified 5.0 m system length, panel mounting, and approval option. Consider the alternative only after confirming its system length, mounting details, electrical characteristics, and certification documents. Do not assume direct interchangeability from the shared 330180 model prefix.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003ePackaging, Shipping, and Warranty\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Bently Nevada 3300 XL Proximitor Sensor, part number 330180-50-05.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New and original, factory packing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months, subject to confirmed seller terms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping carriers:\u003c\/strong\u003e FedEx, UPS, and DHL.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e Confirm stock and dispatch timing before placing the order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder verification:\u003c\/strong\u003e Confirm the complete part number, mounting option, system length, and approval requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1. Why should engineers verify the complete system length instead of the sensor housing alone?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe specified system length relates to the complete transducer arrangement. Incorrect combinations can affect measurement characteristics and calibration. Verify the probe, extension cable, sensor, and applicable system documentation together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. What should a technician check before replacing a sensor during a short shutdown?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRecord the installed part number, wiring positions, supply voltage, monitor channel settings, and baseline readings. Confirm the replacement configuration before disconnecting the original unit. This preparation reduces commissioning delays and wiring mistakes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. Can a standard DC power supply replace the original sensor supply arrangement?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOnly if the supply meets the required voltage, polarity, current capacity, isolation, and circuit protection requirements. Hazardous-area installations may require specific barriers. Follow the applicable installation drawing rather than choosing a supply by voltage alone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4. How can a maintenance team distinguish an electrical fault from a developing machinery problem?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFirst, verify the sensor supply, wiring, and transducer configuration. Then compare the signal with historical trends and independent machine measurements. A persistent mechanical trend with a verified measurement chain provides stronger diagnostic evidence than one isolated reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5. What information helps a supplier confirm the correct replacement model?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProvide the full part number, installed probe model, extension cable configuration, mounting arrangement, supply details, and required hazardous-area approvals. A photograph of the label and the relevant installation drawing can further reduce selection errors.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRequest a Quote from Global PLC Spare HUB\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eContact \u003cstrong\u003eGlobal PLC Spare HUB\u003c\/strong\u003e to request pricing, stock confirmation, and technical selection assistance for the \u003cstrong\u003e330180-50-05 Bently Nevada 3300 XL Proximitor Sensor\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eInclude the existing probe model, system length, mounting arrangement, and required approvals. These details help verify the correct configuration before ordering.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45013951021238,"sku":"330180-50-05","price":156.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/330180-50-00.jpg?v=1792465621","url":"https:\/\/www.plcsparehub.com\/products\/330180-50-05-bently-nevada-3300-xl-proximitor-transducer","provider":"Global PLC Spare Hub","version":"1.0","type":"link"}