{"product_id":"330101-10-43-10-02-05-bently-nevada-probe-3300-xl-8-mm-reliable-sensor","title":"330101-10-43-10-02-05 Bently Nevada Probe | 3300 XL 8 mm Reliable Sensor","description":"\u003ch3\u003e\u003cstrong\u003eBently Nevada 3300 XL 8 mm Probe — 330101-10-43-10-02-05\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #c00000;\"\u003e330101-10-43-10-02-05\u003c\/span\u003e\u003c\/strong\u003e is a \u003cstrong\u003eBently Nevada 3300 XL 8 mm proximity probe\u003c\/strong\u003e designed for non-contact measurement of shaft displacement and vibration when used with a compatible Proximitor Sensor and monitoring system. Its 3\/8-24 UNF threaded mounting, 1.0 m cable, and miniature coaxial ClickLoc connector support installation in machinery monitoring points where accurate probe positioning and reliable signal transmission are required.\u003c\/p\u003e\n\u003cp\u003eThis configuration uses a standard, unarmored cable and carries the specified CSA, ATEX, and IECEx approvals. It is suitable for equipment condition monitoring where the installed probe, extension cable, Proximitor Sensor, and monitor are correctly matched as a complete measurement system.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e01 | Configuration Breakdown — Decode the Ordering Number\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCode Segment\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eEngineering Interpretation\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e330101\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe, 3\/8-24 UNF thread, without armor\u003c\/td\u003e\n\u003ctd\u003eDefines the probe family, mounting thread, and unarmored cable design.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e10\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnthreaded length: 1.0 in\u003c\/td\u003e\n\u003ctd\u003eDefines the unthreaded section. Check mounting clearance and the available adjustment range before installation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e43\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOverall case length: 4.3 in\u003c\/td\u003e\n\u003ctd\u003eDetermines the probe body's installation envelope and required clearance.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e10\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTotal length: 1.0 m (3.3 ft)\u003c\/td\u003e\n\u003ctd\u003eDefines the probe cable length. Confirm the complete electrical measurement-system configuration before selecting extension cables.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e02\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc connector with standard cable\u003c\/td\u003e\n\u003ctd\u003eProvides the specified connector interface. This is not the optional FluidLoc cable configuration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e05\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCSA, ATEX, IECEx approvals\u003c\/td\u003e\n\u003ctd\u003eProvides the specified approval option. Verify certificate applicability and installation requirements for the hazardous-area classification.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eOrdering check:\u003c\/strong\u003e Confirm the complete part number, thread, case dimensions, cable length, connector style, and required hazardous-area approvals against the existing installation before ordering a replacement.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e02 | Electrical and Mechanical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eField Significance\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003ctd\u003eIndustrial machinery condition-monitoring equipment.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330101-10-43-10-02-05\u003c\/td\u003e\n\u003ctd\u003eComplete ordering code for configuration verification.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003ctd\u003eNon-contact proximity measurement system.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003e3\/8-24 UNF\u003c\/td\u003e\n\u003ctd\u003eMust match the machine mounting point or approved mounting hardware.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnthreaded length\u003c\/td\u003e\n\u003ctd\u003e1.0 in\u003c\/td\u003e\n\u003ctd\u003eImportant for mechanical fit and probe adjustment.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall case length\u003c\/td\u003e\n\u003ctd\u003e4.3 in\u003c\/td\u003e\n\u003ctd\u003eCheck access, mounting depth, and available clearance.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal length\u003c\/td\u003e\n\u003ctd\u003e1.0 m (3.3 ft)\u003c\/td\u003e\n\u003ctd\u003eSpecified probe cable length.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable and connector\u003c\/td\u003e\n\u003ctd\u003eStandard unarmored cable; miniature coaxial ClickLoc connector\u003c\/td\u003e\n\u003ctd\u003eProtect the cable from abrasion, crushing, sharp edges, and excessive bending.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal probe DC resistance\u003c\/td\u003e\n\u003ctd\u003e7.59 ± 0.50 Ω, center conductor to outer conductor\u003c\/td\u003e\n\u003ctd\u003eUseful for preliminary continuity and electrical fault checks. Isolate the probe before resistance testing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtension cable capacitance\u003c\/td\u003e\n\u003ctd\u003e69.9 pF\/m (21.3 pF\/ft), typical\u003c\/td\u003e\n\u003ctd\u003eRelevant when verifying the complete probe and extension-cable measurement system.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinear range\u003c\/td\u003e\n\u003ctd\u003e2 mm (80 mil)\u003c\/td\u003e\n\u003ctd\u003eSupports shaft displacement measurement within the specified linear operating region.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecified linear region\u003c\/td\u003e\n\u003ctd\u003eApproximately 0.25–2.3 mm (10–90 mil) from target\u003c\/td\u003e\n\u003ctd\u003eSet the probe gap using the applicable system procedure and verify the output against the monitor's configured range.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended radial vibration gap\u003c\/td\u003e\n\u003ctd\u003e-9 VDC, approximately 1.27 mm (50 mil)\u003c\/td\u003e\n\u003ctd\u003eReference setting for radial vibration applications; follow the applicable installation manual and system requirements.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncremental scale factor\u003c\/td\u003e\n\u003ctd\u003e7.87 V\/mm (200 mV\/mil)\u003c\/td\u003e\n\u003ctd\u003eDefines the relationship between target displacement and output voltage.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard 1 m system ISF tolerance\u003c\/td\u003e\n\u003ctd\u003e±5%, including interchangeability error, measured at 0.25 mm increments from 0°C to +45°C\u003c\/td\u003e\n\u003ctd\u003eUseful for checking calibration expectations and replacement compatibility.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeviation from best-fit straight line\u003c\/td\u003e\n\u003ctd\u003eLess than ±0.025 mm (±1 mil) for standard 1 m systems at 0°C to +45°C\u003c\/td\u003e\n\u003ctd\u003eIndicates the stated linearity performance under the specified test conditions.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe tip material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003ctd\u003eMolded tip design supports a robust probe construction.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe case material\u003c\/td\u003e\n\u003ctd\u003eAISI 303 or 304 stainless steel\u003c\/td\u003e\n\u003ctd\u003eVerify the delivered material specification when it is critical to the application.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListed mass specification\u003c\/td\u003e\n\u003ctd\u003e323 g\/m (11.4 oz, as supplied in the source data)\u003c\/td\u003e\n\u003ctd\u003eConfirm the manufacturer's intended unit and whether it refers to the probe or cable assembly before using it for mechanical calculations.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating and storage temperature\u003c\/td\u003e\n\u003ctd\u003e-52°C to +177°C (-62°F to +350°F), standard probe\u003c\/td\u003e\n\u003ctd\u003eUse the standard rating unless the complete ordering code confirms an extended-temperature configuration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure sealing\u003c\/td\u003e\n\u003ctd\u003eViton O-ring; designed to seal differential pressure between the probe tip and case\u003c\/td\u003e\n\u003ctd\u003eNot supplied pressure-tested. Confirm pressure-seal requirements for the specific machine.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative humidity performance\u003c\/td\u003e\n\u003ctd\u003eLess than 3% change in Average Scale Factor after testing at 93% relative humidity for up to 56 days under IEC 68-2-3 conditions\u003c\/td\u003e\n\u003ctd\u003eRepresents the stated test result, not a guarantee for every installed environment.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprovals option\u003c\/td\u003e\n\u003ctd\u003eCSA, ATEX, IECEx\u003c\/td\u003e\n\u003ctd\u003eConfirm the relevant certificate, gas or dust group, temperature class, and system-level requirements for the installation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturing origin\u003c\/td\u003e\n\u003ctd\u003eMade in U.S.A., as specified\u003c\/td\u003e\n\u003ctd\u003eCheck the supplied product documentation if country-of-origin evidence is required.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cstrong\u003e03 | Construction Details That Matter in Service\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTipLoc molding:\u003c\/strong\u003e The patented molding method provides a more robust bond between the probe tip and body, helping the assembly withstand normal mechanical service conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCableLoc retention:\u003c\/strong\u003e The cable design provides a stated pull strength of 330 N (75 lbf), improving the attachment between the cable and probe tip. This does not mean the cable should be used as a lifting point or subjected to installation pulling loads beyond approved procedures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 mm probe construction:\u003c\/strong\u003e The thicker encapsulation of the sensing coil in the molded PPS tip and the larger stainless-steel case provide a more robust construction than a smaller probe design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard cable configuration:\u003c\/strong\u003e This model specifies standard cable, not the optional FluidLoc cable. If oil or another liquid could migrate through the cable interior, evaluate the FluidLoc option and the machine's sealing requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003e04 | Suitable Equipment and Applications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eWhen matched to the appropriate Bently Nevada signal-conditioning and monitoring hardware, this probe can be used in machinery protection and condition-monitoring applications such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteam turbines:\u003c\/strong\u003e Radial shaft vibration and shaft-position monitoring at compatible measurement locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial compressors:\u003c\/strong\u003e Non-contact shaft displacement measurement for condition monitoring and machinery protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge pumps:\u003c\/strong\u003e Shaft vibration monitoring where the mechanical mounting arrangement and measurement range are suitable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGearboxes and rotating machinery:\u003c\/strong\u003e Monitoring shaft movement at engineered measurement points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenerators and other rotating equipment:\u003c\/strong\u003e Shaft vibration or position measurement when supported by the installed monitoring design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSystem compatibility note:\u003c\/strong\u003e The probe is one component of a measurement chain. Confirm compatibility with the Proximitor Sensor, extension cable, monitor input, required total electrical length, mounting geometry, and application-specific approvals. Do not assume that a matching probe diameter alone establishes interchangeability.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e05 | Diagnostic Capability and Field Troubleshooting\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe probe does not independently generate diagnostic reports. It provides a displacement-related electrical signal to compatible signal-conditioning and monitoring equipment. The resulting signal can support machinery monitoring when the entire measurement chain is configured correctly.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eObserved Symptom\u003c\/th\u003e\n\u003cth\u003eChecks to Perform\u003c\/th\u003e\n\u003cth\u003eEngineering Guidance\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnstable vibration reading\u003c\/td\u003e\n\u003ctd\u003eInspect connector seating, cable routing, shielding, grounding, and mechanical mounting.\u003c\/td\u003e\n\u003ctd\u003eCompare the probe output with a known operating condition and check for electrical interference before replacing the probe.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnexpected DC gap voltage\u003c\/td\u003e\n\u003ctd\u003eVerify the target gap, probe alignment, mounting depth, sensor compatibility, and cable configuration.\u003c\/td\u003e\n\u003ctd\u003eUse the correct system-specific gap-setting procedure. Do not adjust the gap solely to make the displayed value appear normal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo signal or an abnormal monitor input\u003c\/td\u003e\n\u003ctd\u003eCheck connector engagement, cable continuity, short circuits, the Proximitor Sensor supply, and monitor channel configuration.\u003c\/td\u003e\n\u003ctd\u003eFollow approved isolation procedures before electrical testing. Confirm that the fault is not in the sensor, extension cable, or monitor input.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReading changes after maintenance\u003c\/td\u003e\n\u003ctd\u003eReview probe insertion depth, locknut position, cable routing, connector installation, and any changed system components.\u003c\/td\u003e\n\u003ctd\u003eRe-establish the specified gap and verify the measurement chain after work is complete.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePossible oil migration along the cable\u003c\/td\u003e\n\u003ctd\u003eInspect the cable route, machine penetration, seals, and signs of liquid migration.\u003c\/td\u003e\n\u003ctd\u003eThis part number specifies standard cable. Evaluate a FluidLoc configuration if the application requires additional resistance to liquid migration through the cable interior.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eTemperature and sealing caution:\u003c\/strong\u003e The supplied specifications warn that temperatures below -34°C (-30°F) may cause premature failure of the pressure seal. The standard probe rating is -52°C to +177°C, but the pressure-seal warning remains relevant. Do not assume the probe has been pressure-tested before shipment.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e06 | Installation and Maintenance Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eVerify the complete part number and the physical dimensions before removing the existing probe.\u003c\/li\u003e\n\u003cli\u003eConfirm the 3\/8-24 UNF mounting thread, available unthreaded length, overall case length, and cable routing clearance.\u003c\/li\u003e\n\u003cli\u003eInspect the target surface and mounting point. Install and set the probe gap according to the applicable equipment and monitoring-system procedures.\u003c\/li\u003e\n\u003cli\u003eConnect the miniature coaxial ClickLoc connector correctly and avoid twisting, sharply bending, crushing, or pulling the cable during installation.\u003c\/li\u003e\n\u003cli\u003eCheck the probe, extension cable, Proximitor Sensor, and monitor as a complete system. Verify gap voltage, signal stability, and channel configuration before returning equipment to service.\u003c\/li\u003e\n\u003cli\u003eFor hazardous-area installations, follow the approved installation documentation and site procedures. Do not disconnect or replace equipment in an energized hazardous area unless the approved procedure explicitly permits it.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e\u003cstrong\u003e07 | Selection Comparison: Standard Cable vs. FluidLoc Configuration\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe alternative model below is supplied as the requested comparison reference. Its product page identifies a FluidLoc cable configuration. Confirm the full ordering-code definition and dimensional details before treating the two models as interchangeable.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSelection Point\u003c\/th\u003e\n\u003cth\u003e330101-10-43-10-02-05\u003c\/th\u003e\n\u003cth\u003e\u003ca href=\"https:\/\/www.plcsparehub.com\/products\/330101-00-61-15-12-05-proximity-sensor-bently-nevada-with-fluidloc-cable\"\u003e330101-00-61-15-12-05\u003c\/a\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct family\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe, as identified by the supplied product reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting and dimensions\u003c\/td\u003e\n\u003ctd\u003e3\/8-24 UNF thread; 1.0 in unthreaded length; 4.3 in overall case length\u003c\/td\u003e\n\u003ctd\u003eVerify the thread, unthreaded length, and overall case length against the manufacturer's ordering data before replacement.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable configuration\u003c\/td\u003e\n\u003ctd\u003eStandard unarmored cable\u003c\/td\u003e\n\u003ctd\u003eFluidLoc cable configuration, as identified by the supplied product page\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector details\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc connector\u003c\/td\u003e\n\u003ctd\u003eVerify the exact connector configuration against the full ordering code and product documentation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprovals\u003c\/td\u003e\n\u003ctd\u003eCSA, ATEX, IECEx specified by suffix 05\u003c\/td\u003e\n\u003ctd\u003eConfirm the required approvals for the alternative model before use in a hazardous area.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary selection consideration\u003c\/td\u003e\n\u003ctd\u003eSuitable when a standard cable meets the routing and environmental requirements.\u003c\/td\u003e\n\u003ctd\u003eConsider when resistance to oil or liquid migration through the cable interior is an important application requirement.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical recommendation:\u003c\/strong\u003e Choose the standard-cable model when it matches the original installation and the cable environment does not require FluidLoc. Consider the FluidLoc version where the machine design presents a risk of liquid migration through the cable interior. FluidLoc does not replace proper probe mounting, machine sealing, or inspection. Before ordering the alternative, confirm its mechanical dimensions, connector arrangement, cable length, and hazardous-area approvals.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e08 | Global PLC Spare HUB's Insight\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eFor a proximity probe replacement, the most common selection mistake is checking only the series name and probe diameter. The thread, unthreaded length, case length, total cable length, connector, and approval option can all affect whether a replacement is suitable for the installed machine.\u003c\/p\u003e\n\u003cp\u003eFor this 330101-10-43-10-02-05 configuration, verify the complete ordering number against the installed probe and the relevant system documentation. The 1.0 m cable specification is particularly important when checking the complete probe and extension-cable arrangement. A probe with a different cable length or connector should not be assumed to provide the same measurement-system performance without compatibility verification.\u003c\/p\u003e\n\u003cp\u003eDuring troubleshooting, confirm the gap setting and signal-conditioning components before concluding that the probe itself has failed. If the installation shows signs of oil migration, assess the cable option and sealing arrangement rather than treating every abnormal reading as an electrical probe failure.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e09 | Supply, Warranty, and Shipping\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct identification:\u003c\/strong\u003e Bently Nevada 330101-10-43-10-02-05, 3300 XL 8 mm proximity probe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month warranty, subject to the agreed sales terms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-shipment checks:\u003c\/strong\u003e Part-number and condition verification before dispatch, subject to the agreed inspection scope.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping options:\u003c\/strong\u003e FedEx, UPS, or DHL, subject to destination, service availability, and shipment arrangements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrdering support:\u003c\/strong\u003e Provide the complete part number, installed-system details, required approvals, and delivery destination when requesting a quotation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003e10 | Frequently Asked Questions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ1: Can this probe be used to measure shaft displacement directly without a Proximitor Sensor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The probe is a sensing element within a compatible proximity measurement system. A suitable Proximitor Sensor or specified signal-conditioning device is required to convert the probe response into a usable signal for the monitoring equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ2: If the replacement probe has the same 8 mm diameter, can I reuse the existing mounting hardware?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot automatically. Check the 3\/8-24 UNF thread, unthreaded section, overall case length, installation depth, and available clearance. Also verify that the replacement's cable and connector match the installed system. Dimensional similarity alone does not establish interchangeability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ3: What should I check if a new probe gives a different gap voltage from the removed unit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFirst verify the target gap and mounting position. Then check the Proximitor Sensor, cable and connector condition, monitor configuration, and the compatibility of the complete measurement chain. A different voltage does not by itself prove that the new probe is defective; the target position or another system component may have changed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ4: Is the standard cable suitable for equipment exposed to oil or process liquids?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSuitability depends on the cable route and the risk of liquid migration through the cable interior. This model specifies standard cable rather than FluidLoc. If liquid migration is a known concern, compare the FluidLoc option and confirm the complete assembly's suitability with the manufacturer or responsible engineering team.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ5: What information should I send when requesting a replacement quotation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProvide the full existing part number, photographs of the probe label and connector, mounting-thread details, required cable length, compatible Proximitor Sensor or monitor information, and the site's approval requirements. If the probe is being replaced after a fault, include the observed symptoms and any gap-voltage or resistance measurements obtained under an approved test procedure. This helps distinguish a direct replacement from a configuration that requires further engineering review.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/330101-104_4dbdd848-d340-4da7-8f4b-5538f195a28f.png?v=1785135121\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45013947875510,"sku":"330101-10-43-10-02-05","price":254.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/330101-00-16-10-01-CN_906492cd-de16-4a2a-a8cc-6386344d2cc0.jpg?v=1792466348","url":"https:\/\/www.plcsparehub.com\/products\/330101-10-43-10-02-05-bently-nevada-probe-3300-xl-8-mm-reliable-sensor","provider":"Global PLC Spare Hub","version":"1.0","type":"link"}