{"product_id":"2198-c4015-ers-allen-bradley-kinetix-5300-ac-servo-drive","title":"2198-C4015-ERS Allen Bradley Kinetix 5300 AC Servo Drive","description":"\u003ch3\u003e\u003cstrong\u003eAllen Bradley Kinetix 5300 | AC Servo Drive\u003c\/strong\u003e\u003c\/h3\u003e\n\nThe \u003cstrong\u003e\u003cspan style=\"color: #0070C0;\"\u003e2198-C4015-ERS\u003c\/span\u003e\u003c\/strong\u003e is an Allen Bradley servo drive in the \u003cstrong\u003eKinetix 5300\u003c\/strong\u003e product family. It supports motion-control applications that require coordinated motor operation and EtherNet\/IP communication.\n\nThe drive accepts three-phase AC input within the specified 400 V class range. Its continuous output power rating is 2.78 kW, with a continuous current rating of 5.2 A RMS and a peak output current rating of 18.0 A RMS.\n\nEngineers should verify motor compatibility, system configuration, and the applicable Rockwell Automation documentation before installation.\n\n\u003ch3\u003e\u003cstrong\u003e01 | Product Identity\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAllen Bradley (Rockwell Automation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel \/ Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: #0070C0;\"\u003e\u003cstrong\u003e2198-C4015-ERS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Family\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eKinetix 5300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAC Servo Drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCommunication Protocol\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEtherNet\/IP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e191326677622\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eListed Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.28 kg (2.81 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003e\u003cstrong\u003e02 | Electrical and Motion Ratings\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInput Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e342–528 V AC, three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage Class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400 V class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInput Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eContinuous Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.78 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eContinuous Output Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.2 A RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePeak Output Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18.0 A RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetwork Interface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEtherNet\/IP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecified Wire Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24–12 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWire Strip Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecified Terminal Torque\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.5–0.6 N·m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cstrong\u003eElectrical Selection Note:\u003c\/strong\u003e Confirm whether each wire and torque specification applies to the intended terminal. Follow the manufacturer's wiring diagrams and terminal-specific instructions.\n\nThe peak current rating does not represent a continuous operating allowance. Verify overload duration, duty cycle, and motor requirements using the official drive documentation.\n\n\u003ch3\u003e\u003cstrong\u003e03 | Application Fit and Motion-System Integration\u003c\/strong\u003e\u003c\/h3\u003e\n\nThe \u003cstrong\u003e\u003cspan style=\"color: #0070C0;\"\u003eKinetix 5300\u003c\/span\u003e\u003c\/strong\u003e family supports servo-based motion control in compatible industrial automation systems. The drive can suit applications requiring controlled acceleration, deceleration, speed, and position.\n\n- \u003cstrong\u003ePackaging Machinery:\u003c\/strong\u003e Coordinate indexing, product handling, and synchronized movement.\n- \u003cstrong\u003eAssembly Equipment:\u003c\/strong\u003e Control servo axes in automated assembly and positioning stations.\n- \u003cstrong\u003eMaterial Handling:\u003c\/strong\u003e Support motion control in compatible transfer, feeding, and handling mechanisms.\n- \u003cstrong\u003eAutomated Production Lines:\u003c\/strong\u003e Integrate servo motion with controller-based sequencing and EtherNet\/IP communication.\n- \u003cstrong\u003ePrecision Positioning Equipment:\u003c\/strong\u003e Support repeatable movement where the selected motor and control architecture meet application requirements.\n\nConfirm the motor model, feedback interface, mechanical load, and required motion performance before selecting this drive.\n\n\u003ch3\u003e\u003cstrong\u003e04 | System Configuration and Compatibility Checklist\u003c\/strong\u003e\u003c\/h3\u003e\n\nUse the following checklist when selecting a replacement or planning a new installation.\n\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConfiguration Item\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eEngineering Check\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive Identification\u003c\/td\u003e\n\u003ctd\u003eMatch the complete catalog number, including the ERS suffix.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Network\u003c\/td\u003e\n\u003ctd\u003eConfirm three-phase voltage and available fault-current requirements.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Compatibility\u003c\/td\u003e\n\u003ctd\u003eVerify motor ratings, feedback type, and supported combinations.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad Requirements\u003c\/td\u003e\n\u003ctd\u003eCompare continuous and peak current demand with the application profile.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eController Integration\u003c\/td\u003e\n\u003ctd\u003eConfirm controller support, firmware requirements, and EtherNet\/IP configuration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Design\u003c\/td\u003e\n\u003ctd\u003eReview topology, addressing, and real-time communication requirements.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Space\u003c\/td\u003e\n\u003ctd\u003eCheck mounting, cooling, spacing, and enclosure requirements.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eVerify grounding, branch-circuit protection, and applicable safety requirements.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cstrong\u003eReplacement Guidance:\u003c\/strong\u003e Do not assume that two drives are interchangeable because they belong to the same series. Compare the full catalog number, motor compatibility, firmware requirements, and system configuration.\n\n\u003ch3\u003e\u003cstrong\u003e05 | Installation and Commissioning Procedure\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cstrong\u003eBefore Power-Up\u003c\/strong\u003e\n\n1. Verify the drive catalog number and electrical ratings.\n2. Isolate the power supply and confirm the equipment is safe to handle.\n3. Inspect the enclosure, connectors, terminals, and mounting points.\n4. Confirm the specified wire range and terminal preparation requirements.\n5. Check grounding, protective devices, and cable routing.\n6. Verify the motor and feedback connections against the approved wiring diagram.\n\n\u003cstrong\u003eCommissioning Checks\u003c\/strong\u003e\n\n1. Confirm the supply voltage falls within the specified range.\n2. Check controller recognition and EtherNet\/IP communication.\n3. Verify the motor configuration and feedback settings.\n4. Review drive parameters and fault history before enabling motion.\n5. Perform approved low-risk motion tests under controlled conditions.\n6. Confirm direction, speed, positioning response, and stopping behavior.\n7. Record final parameters and commissioning results.\n\nUse the manufacturer's prescribed procedures for discharge time and DC bus voltage verification. Never assume the drive is safe immediately after disconnecting AC power.\n\n\u003ch3\u003e\u003cstrong\u003e06 | Diagnostics and Fault Isolation\u003c\/strong\u003e\u003c\/h3\u003e\n\nA servo-axis fault can originate in the power supply, motor circuit, feedback system, network, configuration, or mechanical load. Use drive diagnostics to isolate the cause before replacing hardware.\n\n- \u003cstrong\u003ePower-Related Faults:\u003c\/strong\u003e Measure the supply at approved test points and compare it with the permitted input range.\n- \u003cstrong\u003eCommunication Faults:\u003c\/strong\u003e Check EtherNet\/IP link status, controller connectivity, addressing, and network diagnostics.\n- \u003cstrong\u003eMotor or Feedback Faults:\u003c\/strong\u003e Inspect connectors and cable condition, then review the corresponding drive fault information.\n- \u003cstrong\u003eOverload Conditions:\u003c\/strong\u003e Compare actual load demand with the drive and motor ratings.\n- \u003cstrong\u003ePositioning Errors:\u003c\/strong\u003e Review command and feedback values, mechanical binding, tuning parameters, and load inertia.\n- \u003cstrong\u003eRecurring Trips:\u003c\/strong\u003e Record fault codes and timestamps to identify patterns during acceleration, deceleration, or steady operation.\n\n\u003cstrong\u003eField Example:\u003c\/strong\u003e A servo axis trips during acceleration but runs normally at low speed. An engineer reviews the fault history, checks the mechanical load, and compares acceleration demand with the motor and drive ratings. This helps distinguish an application overload from a wiring or configuration problem.\n\n\u003ch3\u003e\u003cstrong\u003e07 | Global PLC Spare HUB's Insight\u003c\/strong\u003e\u003c\/h3\u003e\n\nFor servo-drive selection, engineers should evaluate the complete axis rather than output power alone. Supply conditions, motor characteristics, peak torque demand, feedback compatibility, and controller integration all affect system performance.\n\nThe \u003cstrong\u003e\u003cspan style=\"color: #0070C0;\"\u003e2198-C4015-ERS\u003c\/span\u003e\u003c\/strong\u003e lists 2.78 kW continuous output power and 5.2 A RMS continuous current. Its 18.0 A RMS peak rating requires comparison with the application's transient load profile and permitted overload duration.\n\nDuring replacement, record the original drive parameters and fault history before removing the unit. Confirm the motor and network configuration before restoring motion. This approach reduces avoidable commissioning delays and helps technicians identify configuration differences early.\n\n\u003ch3\u003e\u003cstrong\u003e08 | Maintenance and Operational Reliability\u003c\/strong\u003e\u003c\/h3\u003e\n\n- Inspect terminals and connectors according to the scheduled maintenance plan.\n- Keep cooling passages clear and maintain the specified enclosure conditions.\n- Review recurring faults rather than repeatedly resetting the drive.\n- Inspect motor and feedback cables for mechanical wear or connector damage.\n- Back up validated drive parameters before approved maintenance activities.\n- Check network diagnostics after controller, switch, or firmware changes.\n- Document replacement details and post-maintenance test results.\n\nFollow the equipment manual for inspection intervals and environmental limits. The supplied specifications do not establish an operating temperature range or independent certification details.\n\n\u003ch3\u003e\u003cstrong\u003e09 | Packaging, Shipping, and Warranty\u003c\/strong\u003e\u003c\/h3\u003e\n\n- \u003cstrong\u003eProduct:\u003c\/strong\u003e Allen Bradley Kinetix 5300 AC Servo Drive.\n- \u003cstrong\u003ePart Number:\u003c\/strong\u003e \u003cspan style=\"color: #0070C0;\"\u003e\u003cstrong\u003e2198-C4015-ERS\u003c\/strong\u003e\u003c\/span\u003e.\n- \u003cstrong\u003eQuantity:\u003c\/strong\u003e Confirm the quoted quantity before ordering.\n- \u003cstrong\u003ePackaging:\u003c\/strong\u003e Protective packaging suitable for transport; confirm the supplied package contents with the seller.\n- \u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months, subject to the seller's written warranty terms.\n- \u003cstrong\u003eShipping Options:\u003c\/strong\u003e FedEx, UPS, and DHL, subject to destination and service availability.\n- \u003cstrong\u003eDispatch Target:\u003c\/strong\u003e 24–48 hours after order confirmation, subject to stock availability and order processing.\n\nContact Global PLC Spare HUB for a quotation, availability confirmation, and assistance with drive selection.\n\n\u003ch3\u003e\u003cstrong\u003e10 | Frequently Asked Questions\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cstrong\u003eQ1. What information helps determine whether this drive can handle a machine's acceleration profile?\u003c\/strong\u003e\n\nReview motor current, reflected inertia, acceleration time, peak torque demand, and duty cycle. Compare these values with the drive's documented overload capability and the motor's operating limits.\n\n\u003cstrong\u003eQ2. What should technicians preserve before replacing an existing servo drive?\u003c\/strong\u003e\n\nBack up validated parameters where supported, record firmware information, capture fault history, and document motor and feedback settings. Follow the site's approved backup and replacement procedure.\n\n\u003cstrong\u003eQ3. How can engineers investigate intermittent position deviation?\u003c\/strong\u003e\n\nCompare commanded and actual position trends, inspect feedback connections, and review load variation. Check mechanical coupling, backlash, tuning, and relevant drive diagnostics before changing control parameters.\n\n\u003cstrong\u003eQ4. Does an EtherNet\/IP connection alone confirm compatibility with an existing controller?\u003c\/strong\u003e\n\nNo. Confirm the controller family, supported drive integration, firmware versions, network configuration, and motion-control features. A shared protocol does not guarantee complete system compatibility.\n\n\u003cstrong\u003eQ5. Which details should buyers submit when requesting a replacement quotation?\u003c\/strong\u003e\n\nProvide the full catalog number, motor model, controller model, supply voltage, and application details. Include the drive nameplate and existing fault information when available. Ask the supplier to confirm compatibility, availability, warranty terms, and delivery timing.","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":67716282876086,"sku":"2198-C4015-ERS","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/2198-C4015-ERS-1.jpg?v=1792640578","url":"https:\/\/www.plcsparehub.com\/products\/2198-c4015-ers-allen-bradley-kinetix-5300-ac-servo-drive","provider":"Global PLC Spare Hub","version":"1.0","type":"link"}