{"product_id":"1734-ib8-allen-bradley-point-i-o-8-channel-24v-dc-input-module","title":"1734-IB8 Allen-Bradley POINT I\/O 8-Channel 24V DC Input Module","description":"\u003ch3\u003e\u003cb\u003e\u003cspan style=\"color:#0070C0;\"\u003e1734-IB8\u003c\/span\u003e | Allen-Bradley POINT I\/O Digital Input Module\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cb\u003e\u003cspan style=\"color:#0070C0;\"\u003eAllen-Bradley 1734-IB8\u003c\/span\u003e\u003c\/b\u003e is an eight-channel, 24V DC digital input module in the \u003cb\u003ePOINT I\/O family\u003c\/b\u003e from Rockwell Automation. It monitors discrete field signals and transfers input states to a compatible controller through a POINT I\/O communication adapter.\u003c\/p\u003e\n\n\u003cp\u003eIts sinking input configuration supports industrial DC signal circuits. Each channel includes a yellow status indicator for local troubleshooting. A configurable input filter helps engineers balance signal response against electrical noise and contact bounce.\u003c\/p\u003e\n\n\u003cp\u003eThe compact 12 mm-wide module installs on a compatible \u003cb\u003e1734-TB or 1734-TBS terminal base\u003c\/b\u003e. It supports distributed I\/O installations where machine sensors and control equipment connect through a modular POINT I\/O system.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cb\u003e01 | Configuration Breakdown\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eConfiguration Item\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003eIdentification or Function\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCatalog Number\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003e\u003cspan style=\"color:#0070C0;\"\u003e1734-IB8\u003c\/span\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAllen-Bradley\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eRockwell Automation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Family\u003c\/td\u003e\n\u003ctd\u003ePOINT I\/O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eDigital DC sinking input module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Configuration\u003c\/td\u003e\n\u003ctd\u003e8 discrete input channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Input Voltage\u003c\/td\u003e\n\u003ctd\u003e24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal Base\u003c\/td\u003e\n\u003ctd\u003e1734-TB or 1734-TBS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRequired Keyswitch Position\u003c\/td\u003e\n\u003ctd\u003ePosition 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Method\u003c\/td\u003e\n\u003ctd\u003eCompatible mounting base on DIN rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure Type\u003c\/td\u003e\n\u003ctd\u003eOpen-style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cb\u003eCatalog number interpretation:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e1734\u003c\/b\u003e — Identifies the POINT I\/O product family.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIB\u003c\/b\u003e — Identifies a DC sinking input module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e8\u003c\/b\u003e — Indicates eight input channels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis breakdown explains the catalog number's functional meaning. It does not define additional hardware revisions or option suffixes.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cb\u003e02 | Electrical and Input Performance\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eParameter\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003eSpecification\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage Range\u003c\/td\u003e\n\u003ctd\u003e10–28.8V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Input Current\u003c\/td\u003e\n\u003ctd\u003e4 mA per channel at 24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Current Range\u003c\/td\u003e\n\u003ctd\u003e2–5 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Input Current\u003c\/td\u003e\n\u003ctd\u003e5 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware Input Filter\u003c\/td\u003e\n\u003ctd\u003e0.5 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfigurable Input Filter\u003c\/td\u003e\n\u003ctd\u003e0–63 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePOINTBus Current\u003c\/td\u003e\n\u003ctd\u003e75 mA at 5V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Dissipation\u003c\/td\u003e\n\u003ctd\u003e1.6 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThermal Dissipation\u003c\/td\u003e\n\u003ctd\u003e5.5 BTU\/hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation Voltage\u003c\/td\u003e\n\u003ctd\u003e50V continuous, according to supplied specifications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation Test\u003c\/td\u003e\n\u003ctd\u003e2500V DC for 60 seconds, according to supplied specifications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation Type\u003c\/td\u003e\n\u003ctd\u003eReinforced insulation, field side to system side, as specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cb\u003eInput filter selection:\u003c\/b\u003e A shorter filter setting improves response to fast input transitions. A longer setting can help reject brief disturbances and contact bounce. Validate the setting against the sensor response and machine cycle time.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cb\u003e03 | Mechanical Design and Environmental Conditions\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDimension\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003eValue\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e75.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApproximate Weight\u003c\/td\u003e\n\u003ctd\u003e31.8 g; some supplied descriptions state 32.3 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal Base Screw Torque\u003c\/td\u003e\n\u003ctd\u003e0.8 N·m, as specified in the supplied information\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-21°C to 55°C, as reported in the supplied information\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Surrounding Air Temperature\u003c\/td\u003e\n\u003ctd\u003e55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Orientation\u003c\/td\u003e\n\u003ctd\u003eHorizontal or vertical, subject to installation requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n\u003ctd\u003eOpen-style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e10612598308573\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cb\u003eVerification note:\u003c\/b\u003e Confirm temperature limits, isolation ratings, mounting orientation, and terminal torque against the applicable Rockwell Automation installation manual. Use the approved installation conditions for the exact hardware revision.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cb\u003e04 | LED Status and Fault Isolation\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIndicator\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003ePurpose\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003eEngineering Check\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Status\u003c\/td\u003e\n\u003ctd\u003eGreen\/red indicator for module status\u003c\/td\u003e\n\u003ctd\u003eCheck module health and the controller's diagnostic information.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Status\u003c\/td\u003e\n\u003ctd\u003eEight yellow indicators, one per channel\u003c\/td\u003e\n\u003ctd\u003eCompare each LED with the actual field input state.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Status\u003c\/td\u003e\n\u003ctd\u003eListed in the supplied description\u003c\/td\u003e\n\u003ctd\u003eVerify adapter and network status through the complete POINT I\/O system.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThe available descriptions differ in how they count status indicators. Confirm the exact indicator arrangement and meanings using the hardware label and official manual.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003ePractical diagnostic sequence:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003col\u003e\n\u003cli\u003eCheck the field sensor's supply voltage and switching output.\u003c\/li\u003e\n\u003cli\u003eMeasure the input signal at the terminal base using an appropriate meter.\u003c\/li\u003e\n\u003cli\u003eCompare the measured signal with the channel's yellow LED.\u003c\/li\u003e\n\u003cli\u003eInspect the terminal seating, wiring polarity, and terminal-base connections.\u003c\/li\u003e\n\u003cli\u003eReview controller input data and adapter diagnostics.\u003c\/li\u003e\n\u003cli\u003eCheck filter settings if brief signals fail to register or noisy signals trigger unwanted transitions.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cb\u003eDiagnostic limitation:\u003c\/b\u003e The module's LEDs support local fault isolation. They do not independently identify every sensor, wiring, network, or controller fault.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cb\u003e05 | Integration with POINT I\/O Systems\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCommunication adapters:\u003c\/b\u003e Designed for compatible POINT I\/O communication adapters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDistributed architecture:\u003c\/b\u003e Places discrete input monitoring near machine sensors and field devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTerminal base requirement:\u003c\/b\u003e Requires a compatible 1734-TB or 1734-TBS wiring base assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeviceNet and PROFIBUS:\u003c\/b\u003e The supplied product description reports compatibility for Series C modules with applicable adapters. Verify the exact revision and adapter combination before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eController integration:\u003c\/b\u003e Confirm controller configuration, adapter support, module revision, and I\/O mapping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eDo not select a communication adapter from protocol name alone. Check the controller architecture, network interface, firmware requirements, and installed POINT I\/O revisions.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cb\u003e06 | Installation and Commissioning\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003col\u003e\n\u003cli\u003e\n\u003cb\u003eConfirm the part number:\u003c\/b\u003e Match the module label to \u003cb\u003e\u003cspan style=\"color:#0070C0;\"\u003e1734-IB8\u003c\/span\u003e\u003c\/b\u003e and verify the hardware revision.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePrepare the mounting base:\u003c\/b\u003e Install a compatible 1734-TB or 1734-TBS base on the approved DIN rail arrangement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSet the key switch:\u003c\/b\u003e Use position 1 as specified for this module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWire the field signals:\u003c\/b\u003e Follow the official terminal diagram and verify the DC input circuit design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCheck terminal torque:\u003c\/b\u003e Apply the specified torque from the applicable installation manual.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConfigure the adapter:\u003c\/b\u003e Add the module to the supported I\/O configuration and verify the input mapping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTest every channel:\u003c\/b\u003e Switch each sensor or test input and confirm the corresponding LED and controller data.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSet the input filter:\u003c\/b\u003e Adjust the configurable delay according to sensor behavior and required response time.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eDisconnect power where required before installation or wiring. Follow the plant's electrical safety procedures and use suitable protection against accidental contact.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cb\u003e07 | Typical Equipment and Application Scenarios\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePackaging lines:\u003c\/b\u003e Read photoelectric sensors, part-present switches, and conveyor position signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAssembly machines:\u003c\/b\u003e Monitor fixture confirmation, cylinder limit switches, and component detection signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial handling:\u003c\/b\u003e Collect discrete states from conveyor sections, transfer stations, and access mechanisms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWater and process skids:\u003c\/b\u003e Monitor compatible DC switches and discrete equipment status signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMachine tools:\u003c\/b\u003e Collect auxiliary position switches and machine-state inputs within the approved control design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDistributed control panels:\u003c\/b\u003e Expand local discrete input capacity through a compatible POINT I\/O adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eUse the \u003cb\u003e1734-IB8\u003c\/b\u003e for compatible DC discrete signals. It is not an analog input module and does not directly measure temperature, pressure, flow, or other analog process variables.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cb\u003e08 | Global PLC Spare HUB's Insight\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003cp\u003eWhen diagnosing an eight-channel input module, separate field-side problems from controller-side problems. This approach helps maintenance teams avoid replacing a module before checking the complete signal path.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eField example — sensor LED stays off:\u003c\/b\u003e Measure the sensor output at the terminal base. If the voltage falls outside the specified input range, inspect sensor power, wiring, and switching behavior before replacing the module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eField example — intermittent machine detection:\u003c\/b\u003e Check the sensor's switching stability and the configured filter. A longer filter may suppress brief disturbances, but it can also delay valid transitions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eField example — LED works but the PLC bit does not:\u003c\/b\u003e Inspect the adapter connection, module configuration, input mapping, and controller diagnostics. A lit channel indicator does not prove that the complete network data path works correctly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eField example — replacement during maintenance:\u003c\/b\u003e Verify the terminal base, key switch position, adapter compatibility, and module revision before installing the replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThese scenarios represent practical troubleshooting methods. Actual results depend on the sensor circuit, adapter, controller configuration, and installation conditions.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cb\u003e09 | Selection Guide: Confirm These Details Before Ordering\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSelection Check\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003eWhat to Confirm\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Type\u003c\/td\u003e\n\u003ctd\u003e24V DC discrete sinking input application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Count\u003c\/td\u003e\n\u003ctd\u003eEight inputs meet the machine's I\/O requirement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal Base\u003c\/td\u003e\n\u003ctd\u003eExisting 1734-TB or 1734-TBS assembly is suitable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdapter Compatibility\u003c\/td\u003e\n\u003ctd\u003eNetwork protocol, hardware revision, and controller support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Response\u003c\/td\u003e\n\u003ctd\u003eFilter setting meets the signal timing requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironment\u003c\/td\u003e\n\u003ctd\u003eOperating temperature and enclosure requirements match the installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReplacement Details\u003c\/td\u003e\n\u003ctd\u003eCatalog number, revision, wiring arrangement, and configuration match the existing system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eFor replacement orders, provide the complete catalog number, module revision, terminal-base number, and communication adapter model. These details help reduce compatibility risks.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cb\u003e10 | Frequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003cp\u003e\u003cb\u003eQ1: Can the 1734-IB8 detect short pulses from a high-speed sensor?\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eIts input filter includes a 0.5 ms hardware component and a configurable 0–63 ms component. Actual detection depends on the signal duration, filter configuration, and controller update behavior. Test the shortest expected pulse before using it in a timing-critical application.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eQ2: What should I check if only one input channel behaves incorrectly?\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eCompare the affected channel with a working channel under the same conditions. Check the sensor output, terminal connection, signal voltage, and channel LED. If the field signal is correct but the controller state remains incorrect, inspect the module configuration and I\/O mapping.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eQ3: Can I replace another eight-channel POINT I\/O module with the 1734-IB8?\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eNot automatically. Confirm the input wiring type, electrical characteristics, terminal base, adapter support, and module revision. Modules with similar channel counts may use different signal types or wiring arrangements.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eQ4: Does the open-style enclosure allow installation in any control cabinet?\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eNo. The cabinet must provide suitable protection against accidental contact, dust, moisture, and other site hazards. Check the installation environment and enclosure requirements before mounting the module.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eQ5: What information helps obtain the correct replacement quickly?\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eProvide a clear label photograph, complete catalog number, hardware revision, terminal-base model, communication adapter, and a description of the fault. Include the required quantity and delivery destination when requesting a quotation.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cb\u003e11 | Packaging, Shipping, and Warranty\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eProduct:\u003c\/b\u003e Allen-Bradley 1734-IB8 POINT I\/O digital input module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePackaging:\u003c\/b\u003e Protective packaging suitable for transportation. Confirm the supplied packaging configuration before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAccessories:\u003c\/b\u003e Confirm whether the terminal base, connectors, and documentation are included. Do not assume these items come with the module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 12 months, subject to the seller's written warranty terms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping options:\u003c\/b\u003e FedEx, UPS, and DHL, subject to destination and service availability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDispatch target:\u003c\/b\u003e 24–48 hours after order confirmation, subject to stock availability and payment clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cb\u003e12 | Request Pricing and Compatibility Confirmation\u003c\/b\u003e\u003c\/h3\u003e\n\n\u003cp\u003eContact \u003cb\u003eGlobal PLC Spare HUB\u003c\/b\u003e for a quotation on the \u003cb\u003e\u003cspan style=\"color:#0070C0;\"\u003e1734-IB8\u003c\/span\u003e\u003c\/b\u003e. Share your application, installed adapter, terminal-base model, required quantity, and delivery destination.\u003c\/p\u003e\n\n\u003cp\u003eOur team can help review the supplied system details, confirm ordering requirements, and provide current pricing and estimated shipping information.\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":45013896528054,"sku":"1734-IB8","price":143.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/1734-IB8-1.jpg?v=1792044633","url":"https:\/\/www.plcsparehub.com\/products\/1734-ib8-allen-bradley-point-i-o-8-channel-24v-dc-input-module","provider":"Global PLC Spare Hub","version":"1.0","type":"link"}