{"title":"Featured Parts","description":null,"products":[{"product_id":"106m1081-01-bently-nevada-rack-power-input-module-3500-15","title":"106M1081-01 Bently Nevada Rack Power Input Module 3500\/15","description":"\u003ch3\u003eGlobal PLC Spare HUB's Insight\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada \u003cspan style=\"color: #d12727;\"\u003e3500\/15-05-05\u003c\/span\u003e\u003c\/strong\u003e (Internal Part No. 106M1081-01) is the essential high-tier interface for the 3500 Machinery Protection System. This Universal AC Power Input Module (PIM) is engineered to rectify and filter incoming line voltage before it reaches the internal power supply module. Unlike legacy fixed-voltage units, the \u003cstrong\u003e\u003cspan style=\"color: #d12727;\"\u003e3500\/15-05-05\u003c\/span\u003e\u003c\/strong\u003e utilizes an auto-ranging front-end that accepts a broad spectrum from 85 to 264 Vac, making it a \"global\" spare. Engineering teams must note that this universal architecture is physically and electrically incompatible with legacy Low\/High Voltage AC supplies. When paired in the designated half-height rear slots, these modules facilitate true hardware redundancy, ensuring that a single-source power failure does not compromise critical vibration monitoring data on turbines or compressors.\u003c\/p\u003e\n\n\u003ch3\u003eConfiguration Breakdown\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e3500\/15\u003c\/strong\u003e — [System Series] Power Supply Framework\u003c\/p\u003e\n\u003cp\u003e        └── \u003cstrong\u003e-05\u003c\/strong\u003e — [Supply Type] Universal AC (85 to 264 Vac rms)\u003c\/p\u003e\n\u003cp\u003e                └── \u003cstrong\u003e-05\u003c\/strong\u003e — [Agency Approval] Multi-regional Safety Certification\u003c\/p\u003e\n\u003cp\u003e                        └── \u003cstrong\u003e106M1081-01\u003c\/strong\u003e — [PIM Board] High-density AC Filter Assembly\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specification Matrix\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: \u003cstrong\u003eBently Nevada\u003c\/strong\u003e (Baker Hughes)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel\u003c\/strong\u003e: \u003cstrong\u003e\u003cspan style=\"color: #d12727;\"\u003e3500\/15-05-05\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: \u003cstrong\u003e3500 Machinery Protection System\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput Voltage\u003c\/strong\u003e: 85 to 264 Vac rms (Auto-ranging)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency Range\u003c\/strong\u003e: 47 to 63 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlot Requirement\u003c\/strong\u003e: Half-height (Rear Rack Location)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRedundancy\u003c\/strong\u003e: Fully supported via dual PIM installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNet Weight\u003c\/strong\u003e: 0.34 Kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e: Not compatible with legacy LV\/HV AC units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplication Scenarios \u0026amp; System Pairing\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCritical Machinery Protection\u003c\/strong\u003e: The primary power gateway for 3500 racks monitoring steam turbines and compressors.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRedundant Power Infrastructure\u003c\/strong\u003e: Ideal for plants requiring \"Hot-Standby\" power where two modules are installed in tandem.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGlobal Plant Standardization\u003c\/strong\u003e: Simplifies inventory for multinational fleets by supporting all standard AC grid voltages.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRefinery \u0026amp; Power Gen\u003c\/strong\u003e: Optimized for high-vibration, high-EMI environments typical of industrial facilities.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDiagnostic \u0026amp; Integration Capabilities\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eActive Filtering\u003c\/strong\u003e: On-board surge suppression and EMI filtering to protect sensitive monitoring cards.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Source Tracking\u003c\/strong\u003e: The PIM design allows the 3500\/01 Software to monitor the health of the power source.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRedundancy Validation\u003c\/strong\u003e: Logic-controlled load sharing when two modules are utilized for seamless transfer.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePhysical Keying\u003c\/strong\u003e: Specific connector layouts prevent incorrect insertion into DC or legacy AC slots.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGlobal Logistics \u0026amp; Service Excellence\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty Policy\u003c\/strong\u003e: Includes a full \u003cstrong\u003e12-month quality guarantee\u003c\/strong\u003e.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGlobal Shipping\u003c\/strong\u003e: Priority express delivery via \u003cstrong\u003eFedEx\u003c\/strong\u003e, \u003cstrong\u003eUPS\u003c\/strong\u003e, and \u003cstrong\u003eDHL\u003c\/strong\u003e.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDispatch Window\u003c\/strong\u003e: Guaranteed fulfillment and shipment within \u003cstrong\u003e24-48 hours\u003c\/strong\u003e.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackaging\u003c\/strong\u003e: New and original, shipped in factory-grade protective anti-static materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSelection \u0026amp; Buying Guide\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFront\/Rear Alignment\u003c\/strong\u003e: This PIM (106M1081-01) must be used with the Universal AC Supply; it is not compatible with legacy units.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUpgrade Requirements\u003c\/strong\u003e: If upgrading a legacy rack, you must replace both the front Supply and the rear PIM simultaneously.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpares Strategy\u003c\/strong\u003e: We recommend maintaining two units in stock to ensure the rack's redundancy capability is never compromised.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProfessional FAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the \u003cspan style=\"color: #d12727;\"\u003e3500\/15-05-05\u003c\/span\u003e compatible with DC power sources?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, this module is strictly designed for AC inputs (85-264 Vac). If your facility utilizes 24V or 125V DC, a different PIM variant is required.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I mix a Universal AC PIM with a legacy High Voltage AC PIM in the same rack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Mixing universal and legacy power components in the same rack is not supported and may lead to system damage or shutdowns.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the significance of the 106M1081-01 part number?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the specific internal PCBA part number for the Universal AC Power Input Module, distinguishing it from older versions.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow does redundancy work if I only have one mains power source?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTrue redundancy is only achieved if each PIM is connected to a separate, independent AC circuit breaker or UPS system.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDoes this module require any jumpers or dip-switch settings for 110V vs 220V?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, the module is fully auto-ranging. It will automatically detect and adjust to any voltage within the 85 to 264 Vac range.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45013799665846,"sku":"106M1081-01","price":214.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/106M1081-01_2.jpg?v=1775727404"},{"product_id":"106m2686-00-bently-nevada-3500-70-recip-impulse-velocity-monitor-module","title":"106M2686-00 Bently Nevada 3500\/70 Recip Impulse Velocity Monitor Module","description":"\u003ch3\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #e67e22;\"\u003e106M2686-00\u003c\/span\u003e\u003c\/strong\u003e is a specialized \u003cstrong\u003e\u003cspan style=\"color: #e67e22;\"\u003eBently Nevada 3500\/70\u003c\/span\u003e\u003c\/strong\u003e monitor module.\u003c\/li\u003e\n\u003cli\u003eEngineered for reciprocating machinery, it tracks critical impulse and velocity data.\u003c\/li\u003e\n\u003cli\u003eConverts vibration inputs into stable 4-20 mA signals for seamless PLC\/DCS integration.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e \u003cstrong\u003e\u003cspan style=\"color: #e67e22;\"\u003eBently Nevada\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003e\u003cspan style=\"color: #e67e22;\"\u003e106M2686-00\u003c\/span\u003e\u003c\/strong\u003e (3500\/70 Series)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Type:\u003c\/strong\u003e Stable 4-20 mA analog signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy:\u003c\/strong\u003e Precise measurement within ±0.5% of full scale.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResponse Time:\u003c\/strong\u003e Rapid 100 ms for transient event detection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Power:\u003c\/strong\u003e 24 VDC nominal with 300 mA peak consumption.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation Voltage:\u003c\/strong\u003e 500 V RMS for robust ground loop protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e 10 kΩ for high-integrity signal reception.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Range:\u003c\/strong\u003e Functions reliably from -20°C to +70°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eConfiguration Tree\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #e67e22;\"\u003e3500\/70\u003c\/span\u003e\u003c\/strong\u003e Recip Impulse\/Velocity System\n\u003cul\u003e\n\u003cli\u003e∟ \u003cstrong\u003e-00\u003c\/strong\u003e Standard Configuration Revision\n\u003cul\u003e\n\u003cli\u003e∟ \u003cstrong\u003eChassis:\u003c\/strong\u003e Compatible with all 3500 Series Racks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e∟ \u003cstrong\u003eLogic:\u003c\/strong\u003e High-Resolution Analog Trend Processing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e∟ \u003cstrong\u003e106M2686\u003c\/strong\u003e Main Monitoring Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eGlobal PLC Spare HUB's Insight\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #e67e22;\"\u003e106M2686-00\u003c\/span\u003e\u003c\/strong\u003e is the industry standard for reciprocating compressor protection.\u003c\/li\u003e\n\u003cli\u003eIts ability to process impulse signals makes it superior for detecting loose rod bolts or valve issues.\u003c\/li\u003e\n\u003cli\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #e67e22;\"\u003e3500 Series\u003c\/span\u003e\u003c\/strong\u003e architecture ensures this module remains stable even in high-vibration sites.\u003c\/li\u003e\n\u003cli\u003eEngineers favor this card for its 500V isolation, which filters out significant electrical \"noise\" from the field.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eDiagnostic Capabilities \u0026amp; Applications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFault Analysis:\u003c\/strong\u003e Tracks impulse levels to identify non-periodic mechanical impacts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHealth Monitoring:\u003c\/strong\u003e Provides constant 4-20mA feedback for long-term machinery trend analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical Equipment:\u003c\/strong\u003e Reciprocating gas compressors, large gearboxes, and industrial fan drives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegration:\u003c\/strong\u003e Directly compatible with Honeywell, ABB, and Siemens DCS analog input cards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation \u0026amp; Maintenance\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Integrity:\u003c\/strong\u003e Use twisted-pair shielded cables to prevent EMI from affecting the 4-20mA loop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRack Mounting:\u003c\/strong\u003e Ensure the module is securely locked into the 3500 backplane to prevent intermittent contacts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Tie cable shields to the 3500 rack ground to utilize the 500V isolation effectively.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalibration:\u003c\/strong\u003e Perform annual sensitivity verification to maintain the ±0.5% accuracy rating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eCommercial Logistics\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty Policy:\u003c\/strong\u003e Includes our full 12-month industrial quality guarantee.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePriority Shipping:\u003c\/strong\u003e Express worldwide delivery via FedEx, UPS, and DHL.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandling Time:\u003c\/strong\u003e Genuine \u003cstrong\u003e\u003cspan style=\"color: #e67e22;\"\u003e106M2686-00\u003c\/span\u003e\u003c\/strong\u003e units ship within 24-48 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e High-quality US-made industrial hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFAQ and Selection Guidance\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eWhat is the primary function of the 106M2686-00?\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eIt monitors reciprocating machinery for impulse\/velocity transients and provides 4-20mA data to control systems.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDoes this module require a specific backplane?\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eIt fits standard 3500 series racks; however, ensure your I\/O module (RIM) is compatible with the 3500\/70 series.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHow do I troubleshoot \"false high\" readings?\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eExpert Tip: Check for moisture in the transducer junction box and verify the shield grounding at the rack end.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCan I use this for centrifugal equipment monitoring?\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eWhile possible, Bently Nevada offers dedicated centrifugal cards (like the 3500\/42) that may be more cost-effective for simple vibration.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIs the 4-20mA output isolated from the rack power?\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eYes, the 500 V RMS isolation protects the internal rack logic from electrical surges originating in the field-side 4-20mA loop.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45013799698614,"sku":"106M2686-00","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/106M2686-00_c9966f18-e6de-47b6-b022-55f7c8132af3.jpg?v=1775727415"},{"product_id":"allen-bradley-1756-cnbr-controllogix-controlnet-redundant-bridge","title":"Allen-Bradley 1756-CNBR ControlLogix ControlNet Redundant Bridge","description":"\u003ch3\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eAllen-Bradley 1756-CNBR\u003c\/span\u003e\u003c\/strong\u003e is a high-speed communication bridge. It facilitates seamless data exchange between \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eControlLogix\u003c\/span\u003e\u003c\/strong\u003e backplanes and \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eControlNet\u003c\/span\u003e\u003c\/strong\u003e networks. This module features two BNC ports for redundant media support. It efficiently manages 5 Mbps transmission rates for scheduled and unscheduled data. Users should \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/1756-CNBR.pdf?v=1774939489\"\u003edownload the official \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e1756-CNBR\u003c\/span\u003e\u003c\/strong\u003e user manual\u003c\/a\u003e for detailed wiring and configuration instructions.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eAllen-Bradley \/ Rockwell Automation\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e1756-CNBR\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Series:\u003c\/strong\u003e \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eControlLogix\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication Rate:\u003c\/strong\u003e 5 Mbps Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Capacity:\u003c\/strong\u003e Up to 99 Nodes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogix Connections:\u003c\/strong\u003e 40 to 48 Connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Connections:\u003c\/strong\u003e 64 Bidirectional Nodes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackplane Current (5.1V DC):\u003c\/strong\u003e 970 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackplane Current (24V DC):\u003c\/strong\u003e 1.7 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Dissipation:\u003c\/strong\u003e 5.5 Watts Maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation Voltage:\u003c\/strong\u003e 30 Volts Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e 0 to 60 Celsius (32 to 140 Fahrenheit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhysical Slot Width:\u003c\/strong\u003e 1 (Single Slot)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation and Compatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis Support:\u003c\/strong\u003e Compatible with \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e1756-A4\u003c\/span\u003e\u003c\/strong\u003e, \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e1756-A7\u003c\/span\u003e\u003c\/strong\u003e, \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e1756-A10\u003c\/span\u003e\u003c\/strong\u003e, \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e1756-A13\u003c\/span\u003e\u003c\/strong\u003e, and \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e1756-A17\u003c\/span\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supplies:\u003c\/strong\u003e Works with \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e1756-PA72\u003c\/span\u003e\u003c\/strong\u003e, \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e1756-PB75\u003c\/span\u003e\u003c\/strong\u003e, and redundant \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e1756-PA75R\u003c\/span\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabling Requirements:\u003c\/strong\u003e Uses \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e1786-RG6\u003c\/span\u003e\u003c\/strong\u003e quad-shield coaxial cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgramming Port:\u003c\/strong\u003e Includes one (1) 8-pin RJ45 Network Access Port (NAP).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eDiagnostics and Maintenance\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisual Monitoring:\u003c\/strong\u003e Integrated LED indicators display module health and network status.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedia Supervision:\u003c\/strong\u003e Automatic switching occurs upon detection of trunkline failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTroubleshooting Efficiency:\u003c\/strong\u003e Built-in diagnostics identify node conflicts and tap reversal errors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration Ease:\u003c\/strong\u003e Local programming access via the front-facing NAP interface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication and Suitability\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcess Control:\u003c\/strong\u003e Ideal for oil and gas refinery automation systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfrastructure:\u003c\/strong\u003e Suitable for large-scale water treatment and utility management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Optimized for automotive assembly lines requiring high-speed interlocking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eData Bridging:\u003c\/strong\u003e Perfect for linking multiple \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eControlLogix\u003c\/span\u003e\u003c\/strong\u003e chassis across wide plant areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eShipping and Warranty Terms\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging List:\u003c\/strong\u003e One (1) Brand New \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e1756-CNBR\u003c\/span\u003e\u003c\/strong\u003e Module with original protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty Period:\u003c\/strong\u003e Comprehensive 12-month quality assurance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDispatch Time:\u003c\/strong\u003e Fast processing within 24-48 hours of order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogistics Partners:\u003c\/strong\u003e Express delivery via \u003cstrong\u003eFedEx\u003c\/strong\u003e, \u003cstrong\u003eUPS\u003c\/strong\u003e, or \u003cstrong\u003eDHL\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePurchase and Selection Guide\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm your network requires media redundancy before selecting the \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e1756-CNBR\u003c\/span\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eVerify your total connection requirements do not exceed 64 nodes.\u003c\/li\u003e\n\u003cli\u003eEnsure the chassis power supply can accommodate the 970 mA current draw.\u003c\/li\u003e\n\u003cli\u003eAlways use high-quality \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eRG6\u003c\/span\u003e\u003c\/strong\u003e cables to maintain signal integrity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan the 1756-CNBR operate with only one cable connected?\u003c\/strong\u003e\u003cbr\u003eYes, the module functions in simplex mode using only the primary port A.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I prevent communication loss during installation?\u003c\/strong\u003e\u003cbr\u003eCheck tap drop cable labels to avoid accidental reversal of redundant connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the NAP port intended for permanent monitoring?\u003c\/strong\u003e\u003cbr\u003eNo, use the NAP port for temporary configuration and local troubleshooting only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the primary difference from the standard 1756-CNB?\u003c\/strong\u003e\u003cbr\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e1756-CNBR\u003c\/span\u003e\u003c\/strong\u003e adds a second BNC port to support physical media redundancy.\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":45013808578742,"sku":"1756-CNBR","price":217.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/1756-CNBR.jpg?v=1775126627"},{"product_id":"2711p-t15c21d8s-allen-bradley-panelview-plus-7-standard-15-in-hmi","title":"2711P-T15C21D8S Allen-Bradley PanelView Plus 7 Standard 15 in HMI","description":"\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eAllen-Bradley 2711P-T15C21D8S PanelView Plus 7 Standard 15-inch HMI Overview\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #d9534f;\"\u003e2711P-T15C21D8S\u003c\/span\u003e\u003c\/strong\u003e is a high-performance operator interface belonging to the \u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003ePanelView Plus 7 Standard\u003c\/span\u003e\u003c\/strong\u003e series. Featuring a massive 15-inch XGA color active-matrix TFT display, this terminal provides superior visualization for complex industrial processes. The \u003cstrong\u003e\u003cspan style=\"color: #d9534f;\"\u003e2711P-T15C21D8S\u003c\/span\u003e\u003c\/strong\u003e utilizes an analog resistive touchscreen for intuitive user interaction and supports 18-bit color graphics at a 1024 x 768 resolution. Designed for seamless integration with Logix-based controllers, it serves as a robust window into real-time machine data. We suggest reviewing the installation cutout dimensions of 290 x 353 mm before panel preparation.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eTechnical Specifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e \u003cstrong\u003eRockwell Automation \/ Allen-Bradley\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003e\u003cspan style=\"color: #d9534f;\"\u003e2711P-T15C21D8S\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e \u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003ePanelView Plus 7 Standard\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay Size:\u003c\/strong\u003e 15-inch (304 x 228 mm viewing area)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution:\u003c\/strong\u003e 1024 x 768 XGA, 18-bit Color\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Input:\u003c\/strong\u003e Analog Resistive Touchscreen (1 Million Actuations)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Memory:\u003c\/strong\u003e 512 MB RAM \/ 512 MB Non-volatile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e 18-30V DC (24V DC Nominal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 50W Max \/ 102 BTU Heat Dissipation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication:\u003c\/strong\u003e 1 Ethernet Port (Linear Topology), 2 USB Host Ports\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage Expansion:\u003c\/strong\u003e 1 Secure Digital (SD) Card Slot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacklight:\u003c\/strong\u003e Non-replaceable White LED (50,000 hrs life)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eGlobal PLC Spare HUB's Insight\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #d9534f;\"\u003e2711P-T15C21D8S\u003c\/span\u003e\u003c\/strong\u003e is the ideal choice for applications requiring a large-format display without the complexity of the Performance series. In our experience, the 15-inch screen significantly improves operator safety by allowing for larger, clearer alarm banners and more detailed P\u0026amp;ID overlays. The inclusion of VNC client\/server capabilities allows for remote monitoring, which is a massive advantage for plant managers. Unlike older models, the \u003cstrong\u003e\u003cspan style=\"color: #d9534f;\"\u003e2711P-T15C21D8S\u003c\/span\u003e\u003c\/strong\u003e utilizes a solid-state LED backlight, which eliminates the frequent inverter failures associated with CCFL technology.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eApplication \u0026amp; Diagnostic Capabilities\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEquipment Compatibility:\u003c\/strong\u003e Optimized for \u003cstrong\u003eCompactLogix 5370\/5380\u003c\/strong\u003e and \u003cstrong\u003eControlLogix 5570\/5580\u003c\/strong\u003e via EtherNet\/IP.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagnostic Tools:\u003c\/strong\u003e Built-in hardware monitoring for internal temperature, battery health, and Ethernet link status.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Access:\u003c\/strong\u003e Supports ActiveX controls and VNC for flexible system diagnostics and remote viewing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Use Cases:\u003c\/strong\u003e Food and beverage packaging lines, material handling, and large-scale water treatment monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eShipping \u0026amp; Warranty\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Dispatch:\u003c\/strong\u003e Orders for the \u003cstrong\u003e\u003cspan style=\"color: #d9534f;\"\u003e2711P-T15C21D8S\u003c\/span\u003e\u003c\/strong\u003e are processed within \u003cstrong\u003e24-48 hours\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlobal Delivery:\u003c\/strong\u003e Expedited shipping via \u003cstrong\u003eFedEx\u003c\/strong\u003e, \u003cstrong\u003eUPS\u003c\/strong\u003e, and \u003cstrong\u003eDHL\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Month Warranty:\u003c\/strong\u003e Guaranteed protection against manufacturing defects for \u003cstrong\u003eone full year\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One \u003cstrong\u003e\u003cspan style=\"color: #d9534f;\"\u003e2711P-T15C21D8S\u003c\/span\u003e\u003c\/strong\u003e terminal with factory mounting hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eFrequently Asked Questions (FAQ)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eCan the backlight on the 2711P-T15C21D8S be replaced if it fails?\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo, the white LED backlight is integrated and non-replaceable. However, it is rated for a minimum of 50,000 hours of continuous use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eWhat is the purpose of the two USB host ports on the rear?\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese ports support external peripherals such as a mouse, keyboard, or flash drives for log data and application transfers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDoes the 2711P-T15C21D8S support DLR (Device Level Ring) topology?\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo, this Standard model features a single Ethernet port and does not support DLR natively; for ring topologies, an external switch like a Stratix is required.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHow often should I replace the internal battery?\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe CR2032 lithium battery typically lasts 4 years at 25°C. We recommend replacing it proactively to prevent losing real-time clock accuracy.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eWhat is the maximum number of screens allowed in an application for this terminal?\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAs a Standard series terminal, it is generally intended for applications with up to 50 screens and 500 alarms for optimal performance.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003ePurchasing \u0026amp; Maintenance Guide\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the 24VDC power supply is non-isolated and can handle the 50W peak startup load.\u003c\/li\u003e\n\u003cli\u003eAlways use a plastic stylus or gloved finger on the resistive screen to avoid scratching the display surface.\u003c\/li\u003e\n\u003cli\u003eRegularly back up your runtime application to an SD card via the dedicated expansion slot for quick disaster recovery.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":45013822898358,"sku":"2711P-T15C21D8S","price":134.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/2711P-T15C21D8S.jpg?v=1775126450"},{"product_id":"330171-12-23-10-01-05-3300-xl-5mm-proximity-probe-new-original","title":"330171-12-23-10-01-05 3300 XL 5mm Proximity Probe | New Original","description":"\u003ch3 style=\"font-weight: bold;\"\u003eProduct Introduction\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #2980b9;\"\u003e330171-12-23-10-01-05\u003c\/span\u003e\u003c\/strong\u003e is a high-performance \u003cstrong\u003e\u003cspan style=\"color: #2980b9;\"\u003e3300 XL 5mm Proximity Probe\u003c\/span\u003e\u003c\/strong\u003e designed for non-contacting vibration and displacement measurements. Engineered by \u003cstrong\u003eBently Nevada\u003c\/strong\u003e, this \u003cstrong\u003e\u003cspan style=\"color: #2980b9;\"\u003e330171\u003c\/span\u003e\u003c\/strong\u003e series sensor is specifically optimized for fluid-film bearing machines with smaller diameter shafts. For comprehensive wiring diagrams and calibration curves, we strongly advise users to \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/3300_5_mm_Transducer_System_Datasheet.pdf?v=1774858382\"\u003edownload\u003c\/a\u003e the latest technical datasheet and installation manual.\u003c\/p\u003e\n\u003ch3 style=\"font-weight: bold;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: \u003cstrong\u003eBently Nevada\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel\u003c\/strong\u003e: \u003cstrong\u003e\u003cspan style=\"color: #2980b9;\"\u003e330171-12-23-10-01-05\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: \u003cstrong\u003e\u003cspan style=\"color: #2980b9;\"\u003e3300 XL 5mm\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: 1\/4-28 UNF Threaded Proximity Probe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasurement Range\u003c\/strong\u003e: 2.0 mm (80 mils) linear range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinearity\u003c\/strong\u003e: Within ± 0.025 mm (1 mil) over 2.0 mm range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity\u003c\/strong\u003e: 7.87 V\/mm (200 mV\/mil)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response\u003c\/strong\u003e: 0 Hz to 10 kHz (-3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution\u003c\/strong\u003e: High-resolution displacement sensing (sub-micron)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient Temperature\u003c\/strong\u003e: -35°C to +177°C operating range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance\u003c\/strong\u003e: 7.59 Ω ± 0.50 (Center to Outer Conductor)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Polyphenylene sulfide (PPS) high-temp polymer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Material\u003c\/strong\u003e: AISI 304 Stainless Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"font-weight: bold;\"\u003eConfiguration Breakdown\u003c\/h3\u003e\n\u003cul style=\"list-style-type: none; padding-left: 10px;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #2980b9;\"\u003e330171\u003c\/span\u003e\u003c\/strong\u003e (Base Model: 3300 XL 5mm Probe, 1\/4-28 UNF, No Armor)\n\u003cul style=\"list-style-type: none; border-left: 2px solid #2980b9; padding-left: 15px; margin-top: 5px;\"\u003e\n\u003cli\u003e⌊ \u003cstrong\u003e12\u003c\/strong\u003e — Unthreaded Length: 1.2 inches\u003c\/li\u003e\n\u003cli\u003e⌊ \u003cstrong\u003e23\u003c\/strong\u003e — Overall Case Length: 2.3 inches\u003c\/li\u003e\n\u003cli\u003e⌊ \u003cstrong\u003e10\u003c\/strong\u003e — Total Length: 1.0 Meter (3.3 Feet)\u003c\/li\u003e\n\u003cli\u003e⌊ \u003cstrong\u003e01\u003c\/strong\u003e — Connector: ClickLoc with Connector Protector\u003c\/li\u003e\n\u003cli\u003e⌊ \u003cstrong\u003e05\u003c\/strong\u003e — Approval: Multiple Agency Approvals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"font-weight: bold;\"\u003eGlobal PLC Spare HUB's Insight\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #2980b9;\"\u003e330171-12-23-10-01-05\u003c\/span\u003e\u003c\/strong\u003e is a specialized variant within the \u003cstrong\u003e\u003cspan style=\"color: #2980b9;\"\u003e330171\u003c\/span\u003e\u003c\/strong\u003e family, featuring the \"01\" connector option which includes a pre-installed connector protector. This is critical for preventing cross-threading and moisture ingress at the probe-to-extension cable junction. From an engineering perspective, the 5mm tip allows for a smaller mounting footprint compared to standard 8mm probes, making it ideal for restricted access areas in centrifugal pumps and turbines.\u003c\/p\u003e\n\u003ch3 style=\"font-weight: bold;\"\u003eTypical Application \u0026amp; Diagnostics\u003c\/h3\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadial Vibration\u003c\/strong\u003e: Real-time monitoring of shaft movement within sleeve bearings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxial Thrust\u003c\/strong\u003e: Measuring rotor position to prevent catastrophic contact with stationary components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed Sensing\u003c\/strong\u003e: High-frequency response enables precise Keyphasor and RPM detection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagnostic Ability\u003c\/strong\u003e: Captures orbit plots and time-base waveforms when paired with 3500\/M series monitors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Equipment\u003c\/strong\u003e: Fits high-speed turbines, compressors, motors, and industrial fans.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"font-weight: bold;\"\u003eLogistics and Quality Guarantee\u003c\/h3\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition\u003c\/strong\u003e: Authentic product in original packaging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: 12-Month standard industrial warranty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Time\u003c\/strong\u003e: Fast 24-48 hour dispatch window.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarrier Options\u003c\/strong\u003e: Worldwide express via \u003cstrong\u003eFedEx\u003c\/strong\u003e, \u003cstrong\u003eUPS\u003c\/strong\u003e, or \u003cstrong\u003eDHL\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"font-weight: bold;\"\u003eExpert FAQ\u003c\/h3\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the purpose of the \"01\" connector protector on this 330171 probe?\u003c\/strong\u003e \u003cbr\u003eIt provides extra mechanical support and environmental sealing, preventing the ClickLoc connector from loosening due to machine vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I install this probe into a mounting hole smaller than a #3 drill size?\u003c\/strong\u003e \u003cbr\u003eNo. For the 1\/4-28 UNF thread of the \u003cstrong\u003e\u003cspan style=\"color: #2980b9;\"\u003e330171-12-23-10-01-05\u003c\/span\u003e\u003c\/strong\u003e, a #3 tap drill is the minimum recommended to ensure proper thread engagement and prevent casing stress.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow does the PPS tip material handle chemical exposure?\u003c\/strong\u003e \u003cbr\u003ePolyphenylene sulfide (PPS) is highly resistant to most industrial lubricants and corrosive gases, making it suitable for harsh refinery environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs the 1.0m total length of the 330171-12-23-10-01-05 compatible with a 9-meter Proximitor?\u003c\/strong\u003e \u003cbr\u003eYes, provided you use an 8.0-meter extension cable to reach the required 9.0-meter system total. System length must always match the Proximitor rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow do I prevent \"cross-talk\" between two 5mm probes?\u003c\/strong\u003e \u003cbr\u003eEnsure a minimum side-to-side separation of at least 25mm (1 inch) between probe tips to avoid magnetic field interference between adjacent sensors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"font-weight: bold;\"\u003ePurchasing Guidance\u003c\/h3\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Selection\u003c\/strong\u003e: Ensure your machine housing is tapped for 1\/4-28 UNF; for metric M8, use the 330173 series instead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Matching\u003c\/strong\u003e: Calculate your unthreaded vs. threaded length needs carefully to ensure the probe tip reaches the target without bottoming out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArmor Requirement\u003c\/strong\u003e: This model is \"Without Armor.\" If your application requires protection against physical abrasion, select a model with stainless steel braiding.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45013848064182,"sku":"330171-12-23-10-01-05","price":122.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/330171_4.jpg?v=1775126296"},{"product_id":"330173-00-08-05-02-05-bently-nevada-3300-xl-5mm-m8x1-thread-probe","title":"330173-00-08-05-02-05 Bently Nevada 3300 XL 5mm M8x1 Thread Probe","description":"\u003ch3 style=\"font-weight: bold;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330173-00-08-05-02-05\u003c\/strong\u003e represents the pinnacle of eddy current technology for industrial vibration monitoring. This \u003cstrong\u003e\u003cspan style=\"color: #e67e22;\"\u003e3300 XL 5mm Proximity Probe\u003c\/span\u003e\u003c\/strong\u003e provides high-precision displacement measurements for critical rotating machinery. Engineers utilize this sensor to monitor shaft vibration, position, and speed in demanding environments. We recommend that users \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/3300_5_mm_Transducer_System_Datasheet.pdf?v=1774858382\"\u003edownload the official technical manual\u003c\/a\u003e to ensure correct installation and system integration.\u003c\/p\u003e\n\u003ch3 style=\"font-weight: bold;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: \u003cstrong\u003eBently Nevada\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel\u003c\/strong\u003e: \u003cstrong\u003e\u003cspan style=\"color: #e67e22;\"\u003e330173-00-08-05-02-05\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: \u003cstrong\u003e\u003cspan style=\"color: #e67e22;\"\u003e3300 XL 5mm\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasurement Range\u003c\/strong\u003e: 2.0 mm (80 mils) nominal range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity\u003c\/strong\u003e: 7.87 V\/mm (200 mV\/mil) with 3300 XL Proximitor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinearity\u003c\/strong\u003e: Within ± 0.025 mm (1 mil) of ideal line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution\u003c\/strong\u003e: Sub-micron level for precision diagnostics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response\u003c\/strong\u003e: 0 Hz to 10 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range\u003c\/strong\u003e: -35°C to +177°C (-31°F to +351°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental Resistance\u003c\/strong\u003e: Pressure-sealed probe tip; FEP insulated cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterference Immunity\u003c\/strong\u003e: Magnetic field resistance up to 300 Gauss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material\u003c\/strong\u003e: Polyphenylene sulfide (PPS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material\u003c\/strong\u003e: AISI 304 Stainless Steel (SST)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"font-weight: bold;\"\u003eConfiguration Breakdown\u003c\/h3\u003e\n\u003cp\u003eThe model \u003cstrong\u003e\u003cspan style=\"color: #e67e22;\"\u003e330173-00-08-05-02-05\u003c\/span\u003e\u003c\/strong\u003e follows a specific functional hierarchy:\u003c\/p\u003e\n\u003cul style=\"list-style-type: none;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e330173\u003c\/strong\u003e: 3300 XL 5mm Probe, M8 x 1 Thread, Without Armor\n\u003cul style=\"list-style-type: none; padding-left: 20px;\"\u003e\n\u003cli\u003e— \u003cstrong\u003e00\u003c\/strong\u003e: Unthreaded Length Option (0 mm)\u003c\/li\u003e\n\u003cli\u003e— \u003cstrong\u003e08\u003c\/strong\u003e: Overall Case Length Option (80 mm)\u003c\/li\u003e\n\u003cli\u003e— \u003cstrong\u003e05\u003c\/strong\u003e: Total Length Option (0.5 Meter \/ 1.6 Feet)\u003c\/li\u003e\n\u003cli\u003e— \u003cstrong\u003e02\u003c\/strong\u003e: Miniature Coaxial ClickLoc Connector, Standard Cable\u003c\/li\u003e\n\u003cli\u003e— \u003cstrong\u003e05\u003c\/strong\u003e: Multiple Agency Approvals (ATEX, IECEx, CSA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"font-weight: bold;\"\u003eGlobal PLC Spare HUB Review\u003c\/h3\u003e\n\u003cp\u003eOur engineering team identifies the \u003cstrong\u003e\u003cspan style=\"color: #e67e22;\"\u003e3300 XL\u003c\/span\u003e\u003c\/strong\u003e series as the gold standard for fluid-film bearing monitoring. The \u003cstrong\u003e\u003cspan style=\"color: #e67e22;\"\u003e330173-00-08-05-02-05\u003c\/span\u003e\u003c\/strong\u003e specifically excels in tight clearance applications where M8 metric threading is required. This probe offers superior resistance to moisture and chemical exposure through its FEP insulated triaxial cable. It is an essential component for API 670 compliant machinery protection loops.\u003c\/p\u003e\n\u003ch3 style=\"font-weight: bold;\"\u003eInstallation \u0026amp; Maintenance\u003c\/h3\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eEnsure the mounting bracket accommodates the \u003cstrong\u003eM8 x 1\u003c\/strong\u003e thread pitch.\u003c\/li\u003e\n\u003cli\u003eLimit thread engagement to a maximum of 12 mm to prevent damage.\u003c\/li\u003e\n\u003cli\u003eUse the recommended probe case torque of 5.1 N·m (45 in·lb).\u003c\/li\u003e\n\u003cli\u003eMaintain a minimum cable bend radius of 25.4 mm (1.0 in).\u003c\/li\u003e\n\u003cli\u003eVerify the gap setting at 1.27 mm (50 mils) for optimal linearity.\u003c\/li\u003e\n\u003cli\u003eClickLoc connectors allow for easy, tool-free coupling during field maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"font-weight: bold;\"\u003eTypical Application Scenarios\u003c\/h3\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eRadial vibration monitoring in high-speed centrifugal compressors.\u003c\/li\u003e\n\u003cli\u003eAxial thrust position measurement in steam and gas turbines.\u003c\/li\u003e\n\u003cli\u003ePhase reference (Keyphasor) sensing for shaft speed detection.\u003c\/li\u003e\n\u003cli\u003eEccentricity measurements in large scale power generation equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"font-weight: bold;\"\u003eShipping and Warranty\u003c\/h3\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacking List\u003c\/strong\u003e: One (1) \u003cstrong\u003eBently Nevada \u003cspan style=\"color: #e67e22;\"\u003e330173-00-08-05-02-05\u003c\/span\u003e\u003c\/strong\u003e Probe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: 12-month comprehensive quality assurance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDispatch Time\u003c\/strong\u003e: Orders ship within 24-48 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogistics Partners\u003c\/strong\u003e: Worldwide express delivery via \u003cstrong\u003eFedEx\u003c\/strong\u003e, \u003cstrong\u003eUPS\u003c\/strong\u003e, and \u003cstrong\u003eDHL\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"font-weight: bold;\"\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul style=\"list-style-type: disc;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this probe require a specific extension cable?\u003c\/strong\u003e \u003cbr\u003eYes, you must use a \u003cstrong\u003e3300 XL\u003c\/strong\u003e series extension cable to maintain system calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow do I check the health of the probe?\u003c\/strong\u003e \u003cbr\u003eMeasure the DC resistance between the center conductor and outer conductor (Standard: 7.45 Ω ± 0.50).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the significance of the ClickLoc connector?\u003c\/strong\u003e \u003cbr\u003eThe \u003cstrong\u003eClickLoc\u003c\/strong\u003e prevents accidental disconnection and ensures a moisture-resistant seal between cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I use this probe with a 3300 (non-XL) system?\u003c\/strong\u003e \u003cbr\u003eWhile physically compatible, we recommend using the \u003cstrong\u003e3300 XL\u003c\/strong\u003e Proximitor for best performance.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45013848326326,"sku":"330173-00-08-05-02-05","price":168.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/330173.jpg?v=1775126232"},{"product_id":"3500-22m-01-01-00-bently-nevada-transient-data-interface","title":"3500\/22M-01-01-00 Bently Nevada Transient Data Interface","description":"\u003ch3\u003e\u003cstrong\u003eGlobal PLC Spare HUB's Insight\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eBently Nevada 3500\/22M\u003c\/span\u003e\u003c\/strong\u003e is the primary gateway for high-resolution data acquisition.\u003c\/li\u003e\n\u003cli\u003eIt captures critical transient waveforms essential for deep machinery diagnostics.\u003c\/li\u003e\n\u003cli\u003eThis \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eTDI Module\u003c\/span\u003e\u003c\/strong\u003e acts as the interface between hardware and System 1 software.\u003c\/li\u003e\n\u003cli\u003eIt ensures your \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e3500 Series\u003c\/span\u003e\u003c\/strong\u003e rack meets modern industrial communication standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eBently Nevada 3500\/22M-01-01-00\u003c\/span\u003e\u003c\/strong\u003e is a high-performance Transient Data Interface. It integrates the \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e3500 Series\u003c\/span\u003e\u003c\/strong\u003e monitoring rack with asset management platforms. This module provides continuous monitoring and captures vital data during machine startup or coast-down. \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e \u003cstrong\u003eBently Nevada\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e3500\/22M-01-01-00\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eBently Nevada 3500\u003c\/span\u003e\u003c\/strong\u003e Machinery Protection System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule Type:\u003c\/strong\u003e \u003cstrong\u003eTransient Data Interface (TDI)\u003c\/strong\u003e and Ethernet I\/O\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasurement Scope:\u003c\/strong\u003e High-resolution dynamic waveform and static data capture\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e -30°C to +65°C (-22°F to +149°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 10.5 Watts (Maximum)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental Tolerance:\u003c\/strong\u003e 95% non-condensing relative humidity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-Interference:\u003c\/strong\u003e Integrated arc suppressors for relay protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinearity \u0026amp; Resolution:\u003c\/strong\u003e Precision 24-bit internal data processing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eConfiguration Breakdown\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e3500\/22M\u003c\/span\u003e\u003c\/strong\u003e — Series Identification\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e01\u003c\/strong\u003e — \u003cstrong\u003eAA\u003c\/strong\u003e (Standard Transient Data Interface)\n\u003cul\u003e\n\u003cli\u003eOptimized for standard industrial monitoring applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e01\u003c\/strong\u003e — \u003cstrong\u003eBB\u003c\/strong\u003e (10Base-T\/100Base-TX I\/O)\n\u003cul\u003e\n\u003cli\u003eStandard RJ-45 Ethernet connectivity module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e00\u003c\/strong\u003e — \u003cstrong\u003eCC\u003c\/strong\u003e (Agency Approvals)\n\u003cul\u003e\n\u003cli\u003eStandard non-certified configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation and Compatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlot Requirement:\u003c\/strong\u003e Occupies one full-height front slot in the \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e3500 Rack\u003c\/span\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\/O Placement:\u003c\/strong\u003e Requires the corresponding rear I\/O module in the same slot position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoftware Compatibility:\u003c\/strong\u003e Fully supports \u003cstrong\u003eSystem 1\u003c\/strong\u003e and \u003cstrong\u003e3500 Configuration Software\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHost Integration:\u003c\/strong\u003e Compatible with \u003cstrong\u003eHoneywell\u003c\/strong\u003e, \u003cstrong\u003eABB\u003c\/strong\u003e, and \u003cstrong\u003eYokogawa\u003c\/strong\u003e via Modbus or Ethernet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eDiagnostic Capabilities \u0026amp; Typical Applications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform Analysis:\u003c\/strong\u003e Captures Orbit, Timebase, and Spectrum data for vibration analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatus Monitoring:\u003c\/strong\u003e Real-time health checks via OK, TX\/RX, and TM front LEDs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAsset Focus:\u003c\/strong\u003e Ideal for steam turbines, centrifugal compressors, and large motors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm Management:\u003c\/strong\u003e Features Alarm Inhibit and Trip Multiply contacts for testing safety loops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eShipping, Warranty \u0026amp; Packaging\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Time:\u003c\/strong\u003e Fast dispatch within 24-48 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpress Delivery:\u003c\/strong\u003e Worldwide shipping via \u003cstrong\u003eFedEx\u003c\/strong\u003e, \u003cstrong\u003eUPS\u003c\/strong\u003e, and \u003cstrong\u003eDHL\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty Policy:\u003c\/strong\u003e Guaranteed \u003cstrong\u003e12-month technical warranty\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e 1x \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e3500\/22M\u003c\/span\u003e\u003c\/strong\u003e Module, 1x Ethernet I\/O, factory test report.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFAQ \u0026amp; Purchasing Guide\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan the 3500\/22M replace an older 3500\/20 RIM module?\u003c\/strong\u003e\u003cbr\u003eYes, the \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e3500\/22M\u003c\/span\u003e\u003c\/strong\u003e is the functional successor to the 3500\/20. It offers significantly faster data throughput and Ethernet support.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this module support fiber optic connections?\u003c\/strong\u003e\u003cbr\u003eThis specific version (01-01-00) uses copper Ethernet. If you require fiber optics, you must select the 100Base-FX I\/O option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelection Guide:\u003c\/strong\u003e\u003cbr\u003eAlways verify the \u003cstrong\u003eBB\u003c\/strong\u003e option in your part number. Option \u003cstrong\u003e01\u003c\/strong\u003e is for standard RJ-45 copper cables, while Option \u003cstrong\u003e02\u003c\/strong\u003e is required for multi-mode fiber optic cabling over long distances.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45013875032246,"sku":"3500\/22M-01-01-00","price":188.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/3500-22M.jpg?v=1776060944"},{"product_id":"1747-aentr-allen-bradley-slc-500-ethernet-ip-adapter-migration-module","title":"1747-AENTR Allen-Bradley SLC 500 EtherNet\/IP Adapter Migration Module","description":"\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eAllen-Bradley 1747-AENTR SLC 500 EtherNet\/IP Adapter Overview\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #d9534f;\"\u003e1747-AENTR\u003c\/span\u003e\u003c\/strong\u003e serves as a critical bridge for industrial modernization, acting as an \u003cstrong\u003eEtherNet\/IP Adapter Module\u003c\/strong\u003e for the \u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eSLC 500\u003c\/span\u003e\u003c\/strong\u003e series. This module is specifically engineered to facilitate the migration of legacy SLC I\/O to high-performance \u003cstrong\u003eLogix\u003c\/strong\u003e platforms. By replacing the original SLC 500 processor in \u003cstrong\u003eSlot 0\u003c\/strong\u003e, the \u003cstrong\u003e\u003cspan style=\"color: #d9534f;\"\u003e1747-AENTR\u003c\/span\u003e\u003c\/strong\u003e transforms a standard chassis into a distributed I\/O station controlled by a Master processor. We recommend \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/1747-AENTR.pdf?v=1774939575\"\u003edownloading\u003c\/a\u003e the latest \u003cstrong\u003e\u003cspan style=\"color: #d9534f;\"\u003e1747-AENTR\u003c\/span\u003e\u003c\/strong\u003e AOP for seamless integration in Studio 5000.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eTechnical Specifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e \u003cstrong\u003eRockwell Automation \/ Allen-Bradley\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003e\u003cspan style=\"color: #d9534f;\"\u003e1747-AENTR\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e \u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eSLC 500\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule Type:\u003c\/strong\u003e \u003cstrong\u003eEtherNet\/IP Adapter \/ Gateway\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication Ports:\u003c\/strong\u003e \u003cstrong\u003eTwo (2) RJ-45\u003c\/strong\u003e (Integrated Switch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 10\/100 Mbps (Full or Half Duplex)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTopologies:\u003c\/strong\u003e Star, Tree, Linear, and \u003cstrong\u003eDLR (Ring)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e **Slot 0** (Replaces SLC CPU)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackplane Draw:\u003c\/strong\u003e \u003cstrong\u003e470 mA @ 5V DC\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Dissipation:\u003c\/strong\u003e 2.49 Watts (8.5 BTU\/hr)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation Voltage:\u003c\/strong\u003e 50V Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temp:\u003c\/strong\u003e 0 to 60 °C (32 to 140 °F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eGlobal PLC Spare HUB's Insight\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #d9534f;\"\u003e1747-AENTR\u003c\/span\u003e\u003c\/strong\u003e is the \"silver bullet\" for avoiding costly full-system rip-and-replace projects. Our engineering team highlights that the \"R\" designation is vital for modern plant floor resiliency; it allows the module to participate in a \u003cstrong\u003eDevice Level Ring (DLR)\u003c\/strong\u003e, ensuring that a single cable break won't crash your I\/O rack. Unlike older remote adapters, the \u003cstrong\u003e\u003cspan style=\"color: #d9534f;\"\u003e1747-AENTR\u003c\/span\u003e\u003c\/strong\u003e leverages standard CIP messaging, allowing for deep diagnostic integration. It essentially grants a second life to your existing \u003cstrong\u003e1746\u003c\/strong\u003e I\/O hardware investment.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eApplication \u0026amp; Diagnostic Capabilities\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhased Migration:\u003c\/strong\u003e Replace SLC processors with the \u003cstrong\u003e\u003cspan style=\"color: #d9534f;\"\u003e1747-AENTR\u003c\/span\u003e\u003c\/strong\u003e to upgrade control while keeping wiring intact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistributed I\/O:\u003c\/strong\u003e Turn any SLC chassis into a remote rack over an EtherNet\/IP backbone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagnostic Ability:\u003c\/strong\u003e CIP server functionality provides real-time health and I\/O status to the Master controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Networking:\u003c\/strong\u003e Dual ports eliminate the need for external switches in daisy-chain configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eShipping \u0026amp; Warranty\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDispatch Time:\u003c\/strong\u003e Orders for the \u003cstrong\u003e\u003cspan style=\"color: #d9534f;\"\u003e1747-AENTR\u003c\/span\u003e\u003c\/strong\u003e ship within \u003cstrong\u003e24-48 hours\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlobal Logistics:\u003c\/strong\u003e Expedited worldwide delivery via \u003cstrong\u003eFedEx\u003c\/strong\u003e, \u003cstrong\u003eUPS\u003c\/strong\u003e, and \u003cstrong\u003eDHL\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty Terms:\u003c\/strong\u003e Includes a comprehensive \u003cstrong\u003e12-month technical warranty\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage List:\u003c\/strong\u003e One \u003cstrong\u003e\u003cspan style=\"color: #d9534f;\"\u003e1747-AENTR\u003c\/span\u003e\u003c\/strong\u003e Module and technical safety documentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eFrequently Asked Questions (FAQ)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eCan I use the 1747-AENTR in any slot of the SLC chassis?\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo. The 1747-AENTR must be installed in **Slot 0**, as it takes over backplane management duties from the original SLC processor.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDoes this module require a separate IP address for each port?\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo. The two ports function as an embedded switch; the module and I\/O rack share a single IP address.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eIs it possible to configure the 1747-AENTR via BOOTP\/DHCP?\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYes. The module is shipped with DHCP enabled by default. Use the Rockwell BOOTP Utility to assign a static IP.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eWhat is the maximum number of SLC I\/O racks per processor?\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is limited by your Logix controller's Ethernet nodes and bandwidth, but the module supports full 3-chassis expansion.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHow do I troubleshoot communication drops in a DLR configuration?\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck the Link LEDs. In DLR, if one link is down but communication continues, the ring has \"wrapped\" due to a cable fault.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003ePurchasing \u0026amp; Maintenance Guide\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm your 1746 power supply can provide the 470mA required on the 5V rail for this gateway.\u003c\/li\u003e\n\u003cli\u003eIf your architecture uses linear or ring topology, the \"R\" version (this module) is mandatory for link redundancy.\u003c\/li\u003e\n\u003cli\u003eVerify the firmware version of your Logix controller to ensure the 1747-AENTR AOP is fully compatible.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":45013988966582,"sku":"1747-AENTR","price":156.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/1747-AENTR_de2f0ef9-c408-4bdc-adbe-b89d71b085ab.jpg?v=1774947069"},{"product_id":"allen-bradley-1756-l81ext-controllogix-xt-3mb-ethernet-controller","title":"Allen-Bradley 1756-L81EXT ControlLogix-XT 3MB Ethernet Controller","description":"\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eAllen-Bradley 1756-L81EXT ControlLogix-XT Controller Overview\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #d9534f;\"\u003e1756-L81EXT\u003c\/span\u003e\u003c\/strong\u003e serves as a high-performance processor within the \u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eControlLogix-XT\u003c\/span\u003e\u003c\/strong\u003e series. Engineers utilize this module for mission-critical automation in extreme environments. It features a rugged conformal coating to resist corrosion and humidity. This controller operates seamlessly between \u003cstrong\u003e-25°C and 70°C\u003c\/strong\u003e. We recommend \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/1756-L81EXT.pdf?v=1774939469\"\u003edownloading the official technical manual\u003c\/a\u003e and user datasheet for precise wiring diagrams. High-demand applications benefit from its superior thermal dissipation and integrated communication ports.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eTechnical Specifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e \u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eAllen-Bradley \/ Rockwell Automation\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003e\u003cspan style=\"color: #d9534f;\"\u003e1756-L81EXT\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e \u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eControlLogix-XT\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser Memory:\u003c\/strong\u003e \u003cstrong\u003e3 MB\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication:\u003c\/strong\u003e \u003cstrong\u003e1 USB Port\u003c\/strong\u003e and \u003cstrong\u003e1 Embedded Ethernet Port\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Tasks:\u003c\/strong\u003e \u003cstrong\u003e32 Tasks\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrograms Per Task:\u003c\/strong\u003e \u003cstrong\u003e1000 Programs\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw (1.2V DC):\u003c\/strong\u003e \u003cstrong\u003e5 mA\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw (5.1V DC):\u003c\/strong\u003e \u003cstrong\u003e1.2 A\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Dissipation:\u003c\/strong\u003e \u003cstrong\u003e21.2 BTU\/hour\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e \u003cstrong\u003e-25°C to 70°C\u003c\/strong\u003e (Standalone)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental Resistance:\u003c\/strong\u003e \u003cstrong\u003eConformal Coating\u003c\/strong\u003e for harsh chemical protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterference Immunity:\u003c\/strong\u003e High electromagnetic compatibility (EMC) for industrial noise\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgramming:\u003c\/strong\u003e Ladder Logic, Structured Text, Function Block, and SFC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eInstallation and Compatibility\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis Compatibility:\u003c\/strong\u003e Install the \u003cstrong\u003e\u003cspan style=\"color: #d9534f;\"\u003e1756-L81EXT\u003c\/span\u003e\u003c\/strong\u003e in standard or \u003cstrong\u003eXT\u003c\/strong\u003e chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpgrading:\u003c\/strong\u003e Operators using \u003cstrong\u003eLXT\u003c\/strong\u003e chassis should upgrade to the \u003cstrong\u003eK version\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\/O Support:\u003c\/strong\u003e The module supports unlimited local I\/O event triggers for rapid response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Integration:\u003c\/strong\u003e It works with \u003cstrong\u003eEtherNet\/IP\u003c\/strong\u003e, \u003cstrong\u003eDeviceNet\u003c\/strong\u003e, and \u003cstrong\u003eControlNet\u003c\/strong\u003e protocols.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlex I\/O Integration:\u003c\/strong\u003e Pair with \u003cstrong\u003eFlex I\/O-XT\u003c\/strong\u003e for consistent \u003cstrong\u003e-20°C to 70°C\u003c\/strong\u003e ratings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eGlobal PLC Spare HUB's Insight\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #d9534f;\"\u003e1756-L81EXT\u003c\/span\u003e\u003c\/strong\u003e represents a significant leap for hardened automation. Unlike standard controllers, the \u003cstrong\u003eEXT\u003c\/strong\u003e designation ensures hardware longevity in salt-spray atmospheres. The \u003cstrong\u003e3 MB\u003c\/strong\u003e memory handles substantial logic code without sacrificing processing speed. We find the embedded Ethernet port simplifies architecture by removing extra bridge modules. This unit fits perfectly in outdoor control panels or non-climate-controlled floors.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eApplication and Diagnostics\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical Scenarios:\u003c\/strong\u003e Oil and Gas, Mining, Water Treatment, and Power Generation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagnostic Ability:\u003c\/strong\u003e Integrated scrolling display provides real-time status and fault codes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliability:\u003c\/strong\u003e Redundant path communication ensures continuous operation during network strain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eShipping and Warranty\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDispatch Time:\u003c\/strong\u003e We ship all orders within \u003cstrong\u003e24-48 hours\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarrier Options:\u003c\/strong\u003e Worldwide delivery via \u003cstrong\u003eFedEx\u003c\/strong\u003e, \u003cstrong\u003eUPS\u003c\/strong\u003e, and \u003cstrong\u003eDHL\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty Terms:\u003c\/strong\u003e This product includes a \u003cstrong\u003e12-month warranty\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage List:\u003c\/strong\u003e One \u003cstrong\u003e\u003cspan style=\"color: #d9534f;\"\u003e1756-L81EXT\u003c\/span\u003e\u003c\/strong\u003e Controller and original protective industrial packaging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eFrequently Asked Questions (FAQ)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDoes the 1756-L81EXT require a battery for memory backup?\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo, this model utilizes energy storage modules to eliminate the need for lithium batteries.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eWhat is the benefit of the conformal coating on this specific module?\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe coating prevents dendrite growth and leakage currents caused by tropical humidity.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eCan I use standard 1756 I\/O modules with this XT controller?\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYes, but the system temperature rating will drop to the lowest-rated component limit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHow do I choose between the 1756-L81EXT and the standard 1756-L81?\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSelect the \u003cstrong\u003eEXT\u003c\/strong\u003e version if your cabinet temperature exceeds \u003cstrong\u003e60°C\u003c\/strong\u003e regularly.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003ePurchasing Guide\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVerify your chassis series to ensure physical fitment and power supply overhead.\u003c\/li\u003e\n\u003cli\u003eConfirm your firmware revision requirements before integration into existing plants.\u003c\/li\u003e\n\u003cli\u003eCheck the environmental specs of your enclosure to utilize the \u003cstrong\u003eXT\u003c\/strong\u003e range.\u003c\/li\u003e\n\u003cli\u003eContact our technical team for bulk quantity discounts or expedited logistics.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":45013997617334,"sku":"1756-L81EXT","price":146.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/1756-L81EXT.jpg?v=1774940395"},{"product_id":"tk3-2e-bently-nevada-calibration-instrument-new","title":"TK3-2E Bently Nevada Calibration Instrument | New","description":"\u003ch3\u003e\u003cstrong\u003eGlobal PLC Spare HUB's Insight\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong style=\"color: #2c3e50;\"\u003eBently Nevada TK3-2E\u003c\/strong\u003e remains the industry standard for physical verification of proximity transducer systems. From a technical perspective, this mechanical simulator bridges the gap between digital readings and physical reality. By using a motor-driven wobble plate to simulate vibration and a spindle micrometer for position, the \u003cstrong style=\"color: #2c3e50;\"\u003eTK3-2E\u003c\/strong\u003e allows engineers to verify the entire signal chain—from the probe tip to the monitor rack—without rotating the actual machine shaft. This is a critical \"sanity check\" for any \u003cstrong\u003e3500 Series\u003c\/strong\u003e or \u003cstrong\u003e7200 Series\u003c\/strong\u003e monitoring installation where sensor gapping and linearity are paramount.\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical Architecture \u0026amp; Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: \u003cstrong\u003eBently Nevada\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eModel: \u003cstrong style=\"color: #2c3e50;\"\u003eTK3-2E\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSeries: \u003cstrong\u003eTK Calibration Series\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: \u003cstrong\u003eMechanical Vibration \u0026amp; Position Simulator\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eVibration Amplitude Range: 50 to 254 µm (2 to 10 mils) peak-to-peak\u003c\/li\u003e\n\u003cli\u003eElectric Drive Speed: Up to 10,000 cpm\u003c\/li\u003e\n\u003cli\u003eAir Drive Speed: Up to 5,000 cpm\u003c\/li\u003e\n\u003cli\u003ePosition Resolution: Micron-level mechanical spindle control\u003c\/li\u003e\n\u003cli\u003eInput Voltage: 95 to 125 Vac (Standard) \/ 190 to 250 Vac (Optional)\u003c\/li\u003e\n\u003cli\u003eAir Supply Requirement: Up to 90 psi\u003c\/li\u003e\n\u003cli\u003eTarget Material: Hardened alloy steel (AISI 4140 equivalent)\u003c\/li\u003e\n\u003cli\u003eWeight: 5.9 kg (Portable Field Unit)\u003c\/li\u003e\n\u003cli\u003eDimensions: 215 mm x 184 mm x 285 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eCore Diagnostic Capabilities\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVerification of \u003cstrong\u003eProximity Probe\u003c\/strong\u003e linearity and scale factor.\u003c\/li\u003e\n\u003cli\u003eSimulated vibration testing for alert and danger setpoint validation.\u003c\/li\u003e\n\u003cli\u003eThrust position (axial) calibration using the precision micrometer.\u003c\/li\u003e\n\u003cli\u003eIdentification of \"cross-talk\" or cabling interference in the signal loop.\u003c\/li\u003e\n\u003cli\u003eLoop check validation from the machine skid to the control room HMI.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication Scenarios \u0026amp; Device Compatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTesting \u003cstrong\u003eBently Nevada 3300 XL\u003c\/strong\u003e 5mm, 8mm, and 11mm proximity probes.\u003c\/li\u003e\n\u003cli\u003eAnnual calibration of \u003cstrong\u003e3500 Series\u003c\/strong\u003e Machinery Protection Systems.\u003c\/li\u003e\n\u003cli\u003eBench-testing replacement probes before field installation.\u003c\/li\u003e\n\u003cli\u003eTraining technicians on probe gapping and voltage-to-distance curves.\u003c\/li\u003e\n\u003cli\u003eOn-site troubleshooting of erratic vibration readings during operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eLogistics, Packaging \u0026amp; Warranty\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Partners:\u003c\/strong\u003e Rapid global dispatch via FedEx, UPS, and DHL.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelivery Lead Time:\u003c\/strong\u003e Usually ships within 24-48 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new, factory-tested, in protective industrial packaging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty Period:\u003c\/strong\u003e Full 12-month factory warranty included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSelection \u0026amp; Procurement Guidance\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe \u003cstrong style=\"color: #2c3e50;\"\u003eTK3-2E\u003c\/strong\u003e is the electric-driven version; verify your local voltage (110V vs 220V) before ordering.\u003c\/li\u003e\n\u003cli\u003eEnsure the target button material matches your specific shaft metallurgy for accurate results.\u003c\/li\u003e\n\u003cli\u003eFor sites without reliable AC power, ensure your compressed air supply meets the 90 psi requirement for the pneumatic drive.\u003c\/li\u003e\n\u003cli\u003eAlways source from \u003cstrong\u003eGlobal PLC Spare HUB\u003c\/strong\u003e to ensure genuine Bently Nevada instrumentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eExpert FAQ: Professional Insights\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuestion:\u003c\/strong\u003e How does the \u003cstrong style=\"color: #2c3e50;\"\u003eTK3-2E\u003c\/strong\u003e simulate a \"Wobble\" for vibration testing?\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnswer:\u003c\/strong\u003e The unit utilizes a motor-driven slanted plate (wobble plate). As it rotates, the distance to the probe tip changes cyclically, simulating shaft vibration without an actual rotating mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuestion:\u003c\/strong\u003e Can I calibrate 11mm or 25mm probes with the \u003cstrong style=\"color: #2c3e50;\"\u003eTK3-2E\u003c\/strong\u003e?\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnswer:\u003c\/strong\u003e Yes, provided you use the correct probe holder adapters. The standard unit supports common 8mm probes, but the swing-arm is adjustable for larger diameters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuestion:\u003c\/strong\u003e What is the significance of the \"Target Button\" metallurgy?\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnswer:\u003c\/strong\u003e Eddy current probes are sensitive to material composition. The \u003cstrong style=\"color: #2c3e50;\"\u003eTK3-2E\u003c\/strong\u003e uses a standard steel target to match the calibration curve of most industrial shafts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuestion:\u003c\/strong\u003e Why should I choose the electric \u003cstrong style=\"color: #2c3e50;\"\u003eTK3-2E\u003c\/strong\u003e over a strictly manual micrometer?\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnswer:\u003c\/strong\u003e The electric motor allows for dynamic testing (vibration), whereas a manual micrometer only confirms static position (thrust). The \u003cstrong style=\"color: #2c3e50;\"\u003eTK3-2E\u003c\/strong\u003e provides both.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuestion:\u003c\/strong\u003e Does the unit require periodic recalibration?\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnswer:\u003c\/strong\u003e The mechanical micrometers should be checked annually against certified gauge blocks to maintain ISO compliance for your maintenance laboratory.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45014043361462,"sku":"TK3-2E","price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/TK3-2E_c1cb2fb5-2a47-4a4b-8830-c9e04a93ddf6.jpg?v=1775027886"},{"product_id":"bently-nevada-9200-01-50-09-04-velocity-seismoprobe-transducer","title":"Bently Nevada 9200-01-50-09-04 Velocity Seismoprobe Transducer","description":"\u003ch3\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eBently Nevada 9200-01-50-09-04\u003c\/span\u003e\u003c\/strong\u003e is a high-precision two-wire velocity seismoprobe transducer. It measures absolute casing vibration effectively. This sensor supports continuous machinery protection and diagnostic functions. It operates without external power through a moving-coil design. High-quality construction ensures reliability in harsh industrial environments. Please download the official \u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eBently Nevada 9200 Series\u003c\/span\u003e\u003c\/strong\u003e manual for detailed wiring diagrams and mounting instructions.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bently Nevada\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003e9200-01-50-09-04\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasurement Range:\u003c\/strong\u003e 25 mm\/s (1 in\/s) peak velocity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e Minimum operating frequency of 4.5 Hz (270 cpm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 20 mV\/mm\/s (500 mV\/in\/s) with ±5% accuracy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinearity:\u003c\/strong\u003e Optimized for dynamic operating range of 2.54 mm peak-to-peak.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution:\u003c\/strong\u003e High-resolution analog output across pins A and B.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e -29°C to +121°C (-20°F to +250°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironment Tolerance:\u003c\/strong\u003e Dust and moisture resistant; IP-rated seal performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterference Immunity:\u003c\/strong\u003e Anodized aluminum A204 case provides robust shielding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eConfiguration Breakdown\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003e9200\u003c\/span\u003e\u003c\/strong\u003e [Two-wire Velocity Seismoprobe Transducer]\n\u003cul\u003e\n\u003cli\u003e└── \u003cstrong\u003e01\u003c\/strong\u003e [Mounting Angle: 0 ±2.5°, 4.5 Hz Frequency]\n\u003cul\u003e\n\u003cli\u003e└── \u003cstrong\u003e50\u003c\/strong\u003e [Cable Length: 50 feet \/ 15.2 meters]\n\u003cul\u003e\n\u003cli\u003e└── \u003cstrong\u003e09\u003c\/strong\u003e [Mounting Base: Isolated circular 5\/8-18 UNF stud]\n\u003cul\u003e\n\u003cli\u003e└── \u003cstrong\u003e04\u003c\/strong\u003e [Agency Approval: ATEX\/IECEx Hazardous Area]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation and Compatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Guide:\u003c\/strong\u003e Secure the 5\/8-18 UNF stud directly to the machine casing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrientation:\u003c\/strong\u003e Maintain a vertical position within 2.5 degrees for rated sensitivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Perfectly suits \u003cstrong\u003eBently Nevada 3500\u003c\/strong\u003e or \u003cstrong\u003e1900\u003c\/strong\u003e monitoring systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance:\u003c\/strong\u003e Modular design allows for quick inspection and cable replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eApplications and Diagnostics\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal Equipment:\u003c\/strong\u003e Suitable for large pumps, industrial fans, and air compressors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagnostic Power:\u003c\/strong\u003e Captures clean velocity signals for predictive vibration analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFault Detection:\u003c\/strong\u003e Identifies mechanical looseness, imbalance, and bearing wear early.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eLogistics and Warranty\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New and original in factory packing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Methods:\u003c\/strong\u003e Global delivery via FedEx, UPS, and DHL.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDispatch Time:\u003c\/strong\u003e Orders ship within 24-48 hours after payment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Includes a full 12-month factory warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eGlobal PLC Spare HUB's Insight\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #0056b3;\"\u003eBently Nevada 9200-01-50-09-04\u003c\/span\u003e\u003c\/strong\u003e remains a gold standard for self-powered vibration sensors. It excels in remote locations where external power is unavailable. The 4.5 Hz low-frequency limit is ideal for mid-speed rotating machinery. The integrated 50-foot cable reduces the need for additional junction boxes.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFAQ and Buying Guide\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHow do I choose the correct mounting angle?\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eThe \u003cstrong\u003e01\u003c\/strong\u003e option is specifically calibrated for vertical mounting only.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIs this sensor suitable for hazardous zones?\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eYes, the \u003cstrong\u003e04\u003c\/strong\u003e option provides ATEX and IECEx certifications for safety.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWhat load is required for proper calibration?\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eEnsure a 10 kΩ load across terminals A and B for accurate readings.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEngineering Experience:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eAlways verify the case material compatibility with your specific industrial chemicals.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSelection Advice:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eConfirm your monitor supports a two-wire velocity input before purchasing this model.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/9200_74712_Graphs_and_Figures.png?v=1775025635\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45014044311734,"sku":"9200-01-50-09-04","price":136.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/9200_1_816e0473-6fd3-4af4-b293-a458747857ae.jpg?v=1775717255"},{"product_id":"sor-107al-n12-p1-f0a-x-107-series-low-differential-pressure-switch","title":"SOR 107AL-N12-P1-F0A-X 107 Series Low Differential Pressure Switch","description":"\u003ch3\u003eGlobal PLC Spare HUB's Insight\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThe \u003cb\u003e\u003cspan style=\"color: #0056b3;\"\u003eSOR 107AL-N12-P1-F0A-X\u003c\/span\u003e\u003c\/b\u003e offers industry-leading precision for low differential pressure monitoring.\u003c\/li\u003e\n  \u003cli\u003eEngineers trust the \u003cb\u003e\u003cspan style=\"color: #0056b3;\"\u003e107 Series\u003c\/span\u003e\u003c\/b\u003e for critical draft range detection in complex systems.\u003c\/li\u003e\n  \u003cli\u003eThe 6063-T5 aluminum housing ensures long-term durability in challenging industrial climates.\u003c\/li\u003e\n  \u003cli\u003eThis switch provides a dependable safety interface for high-performance burner management.\u003c\/li\u003e\n  \u003cli\u003eIt combines high sensitivity with a rugged design for maximum operational uptime.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThe \u003cb\u003e\u003cspan style=\"color: #0056b3;\"\u003eSOR 107AL-N12-P1-F0A-X\u003c\/span\u003e\u003c\/b\u003e is a professional-grade \u003cb\u003e\u003cspan style=\"color: #0056b3;\"\u003e107 Low Differential Pressure Switch\u003c\/span\u003e\u003c\/b\u003e.\u003c\/li\u003e\n  \u003cli\u003eIt features an external set point adjustment for convenient field calibration.\u003c\/li\u003e\n  \u003cli\u003eThe integrated visual scale allows for immediate verification of pressure settings.\u003c\/li\u003e\n  \u003cli\u003eA NEMA 4 weathertight enclosure protects internal components from environmental ingress.\u003c\/li\u003e\n  \u003cli\u003eThis model utilizes high-quality snap-action elements for reliable electrical switching.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e \u003cb\u003e\u003cspan style=\"color: #0056b3;\"\u003eSOR\u003c\/span\u003e\u003c\/b\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eModel Number:\u003c\/b\u003e \u003cb\u003e\u003cspan style=\"color: #0056b3;\"\u003e107AL-N12-P1-F0A-X\u003c\/span\u003e\u003c\/b\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e \u003cb\u003e\u003cspan style=\"color: #0056b3;\"\u003e107 Series\u003c\/span\u003e\u003c\/b\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eMeasurement Type:\u003c\/b\u003e Low Differential Pressure (Draft Range)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eHousing Material:\u003c\/b\u003e 6063-T5 aluminum (Weathertight NEMA 4)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003ePressure Port Material:\u003c\/b\u003e Plated cold-rolled steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eConnection Size:\u003c\/b\u003e 1\/8” NPT(F) Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eElectrical Connection:\u003c\/b\u003e 3\/4” NPT(F) with screw terminals\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eSet Point Resolution:\u003c\/b\u003e Fine resolution for accurate control\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eRepeatability:\u003c\/b\u003e High repeatability for consistent safety performance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eTemperature Range:\u003c\/b\u003e -40 to 150°F (-40 to 65°C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eMax System Pressure:\u003c\/b\u003e 10 psig (0.69 bar)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eVacuum Protection:\u003c\/b\u003e Protected to 30” Hg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eContact Form:\u003c\/b\u003e SPDT (Single Pole Double Throw)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eNet Weight:\u003c\/b\u003e Approximately 2.3 Kg (5 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation and Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMount the \u003cb\u003e\u003cspan style=\"color: #0056b3;\"\u003e107AL-N12-P1-F0A-X\u003c\/span\u003e\u003c\/b\u003e vertically to ensure optimal diaphragm performance.\u003c\/li\u003e\n  \u003cli\u003eSelect a mounting location free from excessive vibration or mechanical shock.\u003c\/li\u003e\n  \u003cli\u003eConnect the 1\/8” NPT(F) pressure ports using standard industrial fittings.\u003c\/li\u003e\n  \u003cli\u003eEnsure wetted materials like Buna-N and brass are compatible with your process gas.\u003c\/li\u003e\n  \u003cli\u003eThis switch works seamlessly with common HVAC and burner management controllers.\u003c\/li\u003e\n  \u003cli\u003eIt supports integration with most industrial PLC and DCS monitoring systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMaintenance and Diagnostic Capabilities\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThe external visual scale simplifies routine set point audits and inspections.\u003c\/li\u003e\n  \u003cli\u003eThe narrow dead band allows for precise diagnostics of pressure fluctuations.\u003c\/li\u003e\n  \u003cli\u003eScrew terminals provide easy access for electrical continuity testing during maintenance.\u003c\/li\u003e\n  \u003cli\u003eThe rugged mechanical design reduces the need for frequent sensor recalibration.\u003c\/li\u003e\n  \u003cli\u003eInspect the wetted parts periodically if the process gas contains particulates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical Application Scenarios\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManaging furnace draft pressures in industrial heating and boiler units.\u003c\/li\u003e\n  \u003cli\u003eMonitoring air filter status in large commercial HVAC ventilation systems.\u003c\/li\u003e\n  \u003cli\u003eEnsuring safety thresholds in automated burner management sequences.\u003c\/li\u003e\n  \u003cli\u003eControlling low-pressure air or non-corrosive gas services in factories.\u003c\/li\u003e\n  \u003cli\u003eDetecting airflow obstructions in cleanroom environmental control systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCertification and Logistics\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cb\u003eCertifications:\u003c\/b\u003e UL Listed and CSA Certified switching elements.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003ePackage List:\u003c\/b\u003e One \u003cb\u003e\u003cspan style=\"color: #0056b3;\"\u003eSOR 107AL-N12-P1-F0A-X\u003c\/span\u003e\u003c\/b\u003e pressure switch.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e Includes a 12-month quality assurance guarantee.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eExpress Shipping:\u003c\/b\u003e Global delivery via FedEx, UPS, or DHL.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eDispatch Lead Time:\u003c\/b\u003e Ships within 24 to 48 hours of order confirmation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePurchasing Guide\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm the 1\/8” NPT(F) port size matches your existing piping requirements.\u003c\/li\u003e\n  \u003cli\u003eUse the \u003cb\u003e\u003cspan style=\"color: #0056b3;\"\u003e107AL-N12-P1-F0A-X\u003c\/span\u003e\u003c\/b\u003e specifically for non-hazardous weathertight areas.\u003c\/li\u003e\n  \u003cli\u003eVerify that the process temperature will not exceed the 150°F limit.\u003c\/li\u003e\n  \u003cli\u003eCheck compatibility for all wetted materials including acrylic tubing and nylon.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cb\u003eQuestion:\u003c\/b\u003e Can I adjust the set point without removing the electrical cover?\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eAnswer:\u003c\/b\u003e Yes, the external adjustment allows for calibration without opening the housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cb\u003eQuestion:\u003c\/b\u003e Does this unit require regular lubrication of internal parts?\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eAnswer:\u003c\/b\u003e No, the mechanical snap-action design is maintenance-free under normal operating conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cb\u003eQuestion:\u003c\/b\u003e What happens if the system pressure exceeds 10 psig?\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eAnswer:\u003c\/b\u003e Pressures above 10 psig may damage the sensitive diaphragm assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cb\u003eQuestion:\u003c\/b\u003e How does the NEMA 4 rating benefit outdoor installations?\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eAnswer:\u003c\/b\u003e It provides protection against rain, sleet, and dust for reliable outdoor use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cb\u003eQuestion:\u003c\/b\u003e Is the visual scale accurate enough for final calibration?\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eAnswer:\u003c\/b\u003e The scale is excellent for reference, but use a pressure gauge for precision tuning.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SOR","offers":[{"title":"Default Title","offer_id":45060994924726,"sku":"107AL-N12-P1-F0A-X","price":347.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/107AL-N12-P1-F0A-X.jpg?v=1776234177"},{"product_id":"sor-107al-n40-low-pressure-switch-for-hvac-burner-management","title":"SOR 107AL-N40 Low Pressure Switch for HVAC \u0026 Burner Management","description":"\u003ch3\u003e\u003cstrong\u003eGlobal PLC Spare HUB’s Insight\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #e67e22;\"\u003e107AL-N40-P1-F0A-X\u003c\/span\u003e\u003c\/strong\u003e represents a pinnacle in micro-differential pressure sensing.\u003c\/li\u003e\n  \u003cli\u003eUnlike standard industrial switches, this model utilizes an oversized diaphragm to capture minute pressure fluctuations.\u003c\/li\u003e\n  \u003cli\u003eThis design ensures high sensitivity in draft ranges for precision control.\u003c\/li\u003e\n  \u003cli\u003eIt is an essential component for safety-critical environments requiring \u003cstrong\u003eSIL 1\u003c\/strong\u003e or \u003cstrong\u003eSIL 2\u003c\/strong\u003e compliance.\u003c\/li\u003e\n  \u003cli\u003eEngineering teams favor this unit for its robust cast iron housing and hermetically sealed switching elements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eProduct Introduction\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #e67e22;\"\u003e107AL-N40-P1-F0A-X\u003c\/span\u003e\u003c\/strong\u003e is a field-mounted differential pressure switch designed for high-precision industrial monitoring.\u003c\/li\u003e\n  \u003cli\u003eThis instrument excels in detecting very low pressures within air or gas services.\u003c\/li\u003e\n  \u003cli\u003eIt features a \u003cstrong\u003eSPDT\u003c\/strong\u003e switching element for reliable signal output to control systems.\u003c\/li\u003e\n  \u003cli\u003eThe rugged construction suits demanding process industries and hazardous locations.\u003c\/li\u003e\n  \u003cli\u003eUsers can easily perform site calibrations via the external set point adjustment.\u003c\/li\u003e\n  \u003cli\u003eThe integrated visual scale provides immediate feedback during manual operation and setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e \u003cspan style=\"color: #e67e22;\"\u003e\u003cstrong\u003eSOR Controls Group (SOR)\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e \u003cspan style=\"color: #e67e22;\"\u003e\u003cstrong\u003e107AL-N40-P1-F0A-X\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePressure Range:\u003c\/strong\u003e Optimized for low differential and draft ranges.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum System Pressure:\u003c\/strong\u003e 10 psig (0.69 bar) with vacuum protection to 30” Hg.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwitching Element:\u003c\/strong\u003e \u003cstrong\u003eSPDT\u003c\/strong\u003e explosion-proof hermetically sealed capsule.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eElectrical Rating:\u003c\/strong\u003e 5 Amps at 250 VAC and 5.0 Amps at 30 VDC (resistive).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Limits:\u003c\/strong\u003e Ambient and process range from -40 to 150°F (-40 to 65°C).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Durable \u003cstrong\u003eCast Iron\u003c\/strong\u003e for maximum environmental protection.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody and Port Material:\u003c\/strong\u003e 356-T6 aluminum body with plated cold-rolled steel ports.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Size:\u003c\/strong\u003e 1\/8” NPT(F) process connection and 1\/2” NPT(M) electrical conduit.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e High-accuracy sensing via a large surface area diaphragm.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSafety Integrity:\u003c\/strong\u003e Certified for use in \u003cstrong\u003eSIL1\u003c\/strong\u003e and \u003cstrong\u003eSIL2\u003c\/strong\u003e environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eInstallation and Compatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMount the \u003cstrong\u003e\u003cspan style=\"color: #e67e22;\"\u003e107AL-N40-P1-F0A-X\u003c\/span\u003e\u003c\/strong\u003e vertically to ensure optimal diaphragm performance.\u003c\/li\u003e\n  \u003cli\u003eThe unit integrates seamlessly with \u003cstrong\u003eHoneywell\u003c\/strong\u003e, \u003cstrong\u003eABB\u003c\/strong\u003e, and \u003cstrong\u003eSiemens\u003c\/strong\u003e HVAC controllers.\u003c\/li\u003e\n  \u003cli\u003eUse 18-AWG color-coded stranded wire leads for all electrical terminations.\u003c\/li\u003e\n  \u003cli\u003eVerify wetted materials like \u003cstrong\u003eBuna-N\u003c\/strong\u003e and \u003cstrong\u003eStainless Steel\u003c\/strong\u003e match your process media.\u003c\/li\u003e\n  \u003cli\u003eThis switch fits Class I, Groups A, B, C, D hazardous locations.\u003c\/li\u003e\n  \u003cli\u003eIt serves as a direct replacement for legacy low-pressure mechanical monitors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eCommissioning and Maintenance\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjust the external set point using a standard wrench during live operation.\u003c\/li\u003e\n  \u003cli\u003eThe visual indication scale simplifies the calibration process for field technicians.\u003c\/li\u003e\n  \u003cli\u003eInspect the diaphragm housing periodically for debris accumulation in gas lines.\u003c\/li\u003e\n  \u003cli\u003eHermetically sealed contacts eliminate the need for internal cleaning or contact filing.\u003c\/li\u003e\n  \u003cli\u003eCheck electrical seals to maintain the weathertight integrity of the \u003cstrong\u003e\u003cspan style=\"color: #e67e22;\"\u003e107AL\u003c\/span\u003e\u003c\/strong\u003e series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eCertified Applications and Diagnostics\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHVAC Systems:\u003c\/strong\u003e Monitors filter pressure drops and airflow in large ducts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBurner Management:\u003c\/strong\u003e Ensures proper draft pressure before boiler ignition sequences.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVibration Monitoring:\u003c\/strong\u003e Complements \u003cstrong\u003eBently Nevada\u003c\/strong\u003e systems in machinery protection loops.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSafety Systems:\u003c\/strong\u003e Functions reliably within \u003cstrong\u003eSafety Instrumented Systems (SIS)\u003c\/strong\u003e.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiagnostics:\u003c\/strong\u003e Detects restricted filters or failing fan motors through pressure shifts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e One \u003cstrong\u003e\u003cspan style=\"color: #e67e22;\"\u003e107AL-N40-P1-F0A-X\u003c\/span\u003e\u003c\/strong\u003e unit and technical manual.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month comprehensive professional warranty included.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDispatch Time:\u003c\/strong\u003e Orders ship within 24 to 48 hours.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipping Carriers:\u003c\/strong\u003e Worldwide express delivery via \u003cstrong\u003eFedEx\u003c\/strong\u003e, \u003cstrong\u003eUPS\u003c\/strong\u003e, or \u003cstrong\u003eDHL\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eGlobal PLC Spare HUB Review\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOur technical assessment confirms the \u003cstrong\u003e\u003cspan style=\"color: #e67e22;\"\u003e107AL-N40-P1-F0A-X\u003c\/span\u003e\u003c\/strong\u003e is superior for low-flow detection.\u003c\/li\u003e\n  \u003cli\u003eThe mechanical snap-action is crisp and repeatable over thousands of cycles.\u003c\/li\u003e\n  \u003cli\u003eIt outperforms electronic sensors in high-interference electrical environments.\u003c\/li\u003e\n  \u003cli\u003eThis hardware is compatible with \u003cstrong\u003eDCS\u003c\/strong\u003e and \u003cstrong\u003ePLC\u003c\/strong\u003e inputs across all major industrial platforms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eFAQ and Buying Guide\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eHow do I select the correct port size for this series?\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003eThe standard model uses 1\/8” NPT; specify F1A if you require 1\/4” NPT connections.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eCan I use this switch for outdoor installations?\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003eYes, the weathertight and explosion-proof housing handles harsh ambient conditions.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eIs this model suitable for safety-related trip circuits?\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003eYes, it carries \u003cstrong\u003eIEC 61508\u003c\/strong\u003e certification for \u003cstrong\u003eSIL1\u003c\/strong\u003e and \u003cstrong\u003eSIL2\u003c\/strong\u003e applications.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eWhat is the advantage of the large sensing diaphragm?\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003eIt provides the mechanical leverage needed to trip the switch at very low pressures.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eDoes the unit support DC loads?\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003eIt supports up to 5.0 Amps at 30 VDC for resistive industrial loads.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SOR","offers":[{"title":"Default Title","offer_id":45078777200822,"sku":"107AL-N40-P1-F0A-X","price":389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/107AL-N40-P1-F0A-X.jpg?v=1777013809"},{"product_id":"s30b-2011ba-sick-safety-laser-scanner-s300-standard-genuine","title":"S30B-2011BA SICK Safety Laser Scanner S300 Standard Genuine","description":"\u003ch3\u003e\u003cstrong\u003eSafety Systems Engineering Profile\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #d35400;\"\u003eS30B-2011BA\u003c\/span\u003e\u003c\/strong\u003e is an ultra-compact safety laser scanner from the \u003cstrong\u003eSICK S300 Standard\u003c\/strong\u003e series.\u003c\/li\u003e\n    \u003cli\u003eIt features a 270° scanning angle with a 2-meter protective field and an 8-meter warning field.\u003c\/li\u003e\n    \u003cli\u003eDesigned as a \"Sensor-only\" unit, it is the perfect replacement head for existing system-plug installations.\u003c\/li\u003e\n    \u003cli\u003eComplies with SIL 2 and PL d standards, providing Type 3 safety for indoor industrial environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eTechnical Specification Matrix\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e SICK\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003e\u003cspan style=\"color: #d35400;\"\u003eS30B-2011BA\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRange:\u003c\/strong\u003e 2m Protective \/ 8m Warning \/ 30m Distance\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSafety Rating:\u003c\/strong\u003e SIL 2 (IEC 61508) \/ PL d (EN ISO 13849)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eScan Angle:\u003c\/strong\u003e 270°\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eResponse Time:\u003c\/strong\u003e 80 ms (Configurable)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInterface:\u003c\/strong\u003e EFI (Safe Communication), RS-232, and RS-422\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e Aluminum die-cast, IP65 rated\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eGlobal PLC Spare HUB's Insight\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #d35400;\"\u003eS30B-2011BA\u003c\/span\u003e\u003c\/strong\u003e is the industry favorite for AGV and mobile robot safety due to its small footprint.\u003c\/li\u003e\n    \u003cli\u003eUsing the EFI interface, this scanner can easily integrate into a multi-scanner network for 360° coverage.\u003c\/li\u003e\n    \u003cli\u003eMaintenance engineers prefer this model for its \"Contour as Reference\" feature, which prevents safety bypasses if the scanner is misaligned.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eDiagnostic Capabilities \u0026amp; Application Scope\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eError Diagnostics:\u003c\/strong\u003e Integrated seven-segment display provides instant feedback on OSSD status and contamination.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConfiguration Memory:\u003c\/strong\u003e Supports automatic configuration upload when used with a SICK system plug.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSuitable Equipment:\u003c\/strong\u003e AGVs, mobile service robots, and automated assembly stations.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTypical Scenarios:\u003c\/strong\u003e Area protection, collision avoidance, and access monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eCommercial \u0026amp; Logistics Terms\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDispatch:\u003c\/strong\u003e Orders are processed and shipped within 24-48 hours.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExpress Logistics:\u003c\/strong\u003e Worldwide delivery via \u003cstrong\u003eFedEx\u003c\/strong\u003e, \u003cstrong\u003eUPS\u003c\/strong\u003e, and \u003cstrong\u003eDHL\u003c\/strong\u003e.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Includes a comprehensive 12-month technical guarantee.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Guaranteed genuine SICK hardware in original factory-sealed condition.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eProfessional FAQ \u0026amp; Selection Guide\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\u003cstrong\u003eDoes this include the system plug?\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003eNo, this is the sensor head only. It is intended for users who already have a system plug or connecting cable.\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eWhat is \"Multiple Sampling\"?\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003eIt is a configurable filter that requires the laser to see an object multiple times before tripping, reducing false stops from dust.\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eCan I use this for hand protection?\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003eYes, by configuring the resolution to 30mm, the \u003cstrong\u003eS30B-2011BA\u003c\/strong\u003e can be used for leg and hand detection.\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eHow do I handle the 270° field in a corner?\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003eThe CDS software allows you to \"paint\" specific protective zones, effectively masking out walls or permanent obstacles.\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eIs it compatible with EFI safe communication?\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003eYes, the \u003cstrong\u003eS30B-2011BA\u003c\/strong\u003e fully supports SICK's EFI protocol for networking with safety controllers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SICK","offers":[{"title":"Default Title","offer_id":45078779986102,"sku":"S30B-2011BA","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/S30B-2011BA.jpg?v=1777015090"},{"product_id":"s30a-7111cp-sick-s3000-profinet-io-advanced-safety-laser-scanner","title":"S30A-7111CP SICK S3000 PROFINET IO Advanced Safety Laser Scanner","description":"\u003ch3\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eThe \u003cspan style=\"color: #d9534f;\"\u003e\u003cstrong\u003eS30A-7111CP\u003c\/strong\u003e\u003c\/span\u003e is a high-end safety laser scanner head for networked automation.\u003c\/li\u003e\n    \u003cli\u003eAs part of the \u003cspan style=\"color: #d9534f;\"\u003e\u003cstrong\u003eS3000 PROFINET IO Advanced\u003c\/strong\u003e\u003c\/span\u003e series, it utilizes PROFIsafe for safety logic.\u003c\/li\u003e\n    \u003cli\u003eIt offers a 7-meter protective field and a 49-meter warning range for comprehensive area coverage.\u003c\/li\u003e\n    \u003cli\u003eThis \u003cspan style=\"color: #d9534f;\"\u003e\u003cstrong\u003eS30A-7111CP\u003c\/strong\u003e\u003c\/span\u003e model is optimized for indoor industrial safety environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SICK Sensors\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cspan style=\"color: #d9534f;\"\u003e\u003cstrong\u003eS30A-7111CP\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e \u003cspan style=\"color: #d9534f;\"\u003e\u003cstrong\u003eS3000 PROFINET IO Advanced\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSafety Rating:\u003c\/strong\u003e SIL 2 (IEC 61508) \/ PL d (EN ISO 13849)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProtective Field:\u003c\/strong\u003e 7 Meters\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWarning Field:\u003c\/strong\u003e 49 Meters\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eScanning Angle:\u003c\/strong\u003e 190°\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFieldbus:\u003c\/strong\u003e PROFINET PROFIsafe (Integrated 2-port switch)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eResolution:\u003c\/strong\u003e Configurable from 30mm to 150mm\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e Aluminum die-cast with IP65 enclosure rating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eGlobal PLC Spare HUB’s Insight\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eThe \u003cspan style=\"color: #d9534f;\"\u003e\u003cstrong\u003eS30A-7111CP\u003c\/strong\u003e\u003c\/span\u003e is the ideal choice for engineers implementing Industry 4.0 safety protocols.\u003c\/li\u003e\n    \u003cli\u003eBy removing local I\/O, this \u003cspan style=\"color: #d9534f;\"\u003e\u003cstrong\u003eS3000 PROFINET IO Advanced\u003c\/strong\u003e\u003c\/span\u003e unit streamlines diagnostic data directly to the HMI.\u003c\/li\u003e\n    \u003cli\u003eIt is a \"head-only\" component, perfect for rapid field replacement of existing S3000 network nodes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eDiagnostics and Applications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNetwork Management:\u003c\/strong\u003e Supports SNMP, LLDP, and MRP for high-availability ring topologies.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eKey Applications:\u003c\/strong\u003e Mobile platform protection (AGVs), automated warehouses, and robotic safety zones.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOptical Durability:\u003c\/strong\u003e Scratch-resistant polycarbonate screen ensures long-term reliability in dusty environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExpress Delivery:\u003c\/strong\u003e Fast global shipping via FedEx, UPS, and DHL.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDispatch Time:\u003c\/strong\u003e Reliable 24-48 hour processing for the \u003cspan style=\"color: #d9534f;\"\u003e\u003cstrong\u003eS30A-7111CP\u003c\/strong\u003e\u003c\/span\u003e.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month industrial quality assurance included.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e One (1) \u003cspan style=\"color: #d9534f;\"\u003e\u003cstrong\u003eS30A-7111CP\u003c\/strong\u003e\u003c\/span\u003e scanner head (System plug not included).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eProfessional FAQ \u0026amp; Buying Guide\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDoes the S30A-7111CP support ring redundancy?\u003c\/strong\u003e\n    Yes, it supports MRP (Media Redundancy Protocol) as a client for stable PROFINET communication.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWhat is the maximum number of fields I can configure?\u003c\/strong\u003e\n    You can configure up to 8 fields within 4 field sets for different monitoring scenarios.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIs this unit suitable for outdoor use?\u003c\/strong\u003e\n    No, this model is specifically rated for indoor applications to ensure consistent laser remission.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCan I configure the scanner via the PROFINET port?\u003c\/strong\u003e\n    Primary configuration is typically done via the RS-232 interface using SICK's CDS software.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWhat happens if the front screen is damaged?\u003c\/strong\u003e\n    The \u003cspan style=\"color: #d9534f;\"\u003e\u003cstrong\u003eS30A-7111CP\u003c\/strong\u003e\u003c\/span\u003e will trigger a fault; the screen can be replaced to restore operation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SICK","offers":[{"title":"Default Title","offer_id":45078780018870,"sku":"S30A-7111CP","price":398.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/S30A-7111CP.jpg?v=1777015099"},{"product_id":"330930-065-11-00-bently-nevada-nsv-extension-cable-3300-series-6-5m","title":"330930-065-11-00 Bently Nevada NSv Extension Cable 3300 Series 6.5m","description":"\u003ch3\u003e\u003cstrong\u003eHigh-Integrity Extension Cable for Proximity Systems\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #c00000;\"\u003e330930-065-11-00\u003c\/span\u003e\u003c\/strong\u003e ensures stable signal transmission in demanding environments.\u003c\/p\u003e\n\u003cp\u003eThis cable belongs to the \u003cstrong\u003e\u003cspan style=\"color: #c00000;\"\u003eBently Nevada 3300 NSv Series\u003c\/span\u003e\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt connects proximity probes to monitoring systems with high reliability.\u003c\/p\u003e\n\u003cp\u003eEngineers use it for precision vibration and displacement measurement systems.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eConfiguration Breakdown\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan style=\"color: #c00000;\"\u003e330930-065-11-00\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e330930\n\u003cul\u003e\n\u003cli\u003e3300 NSv extension cable assembly\u003c\/li\u003e\n\u003cli\u003eDesigned for proximity monitoring systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e065\n\u003cul\u003e\n\u003cli\u003eCable length: 6.5 meters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e11\n\u003cul\u003e\n\u003cli\u003eFluidLoc cable with stainless steel armor\u003c\/li\u003e\n\u003cli\u003eNo FEP outer jacket, includes connector protector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e00\n\u003cul\u003e\n\u003cli\u003eNo additional agency approvals required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eElectrical and Signal Characteristics\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e75-ohm coaxial cable ensures signal integrity.\u003c\/li\u003e\n\u003cli\u003eCapacitance approximately 69.9 pF per meter.\u003c\/li\u003e\n\u003cli\u003eCenter conductor resistance 0.220 ohms per meter.\u003c\/li\u003e\n\u003cli\u003eShield resistance 0.066 ohms per meter.\u003c\/li\u003e\n\u003cli\u003eMaintains stable signal over extended cable runs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eMeasurement Performance Support\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupports linear measurement range up to 1.75 mm.\u003c\/li\u003e\n\u003cli\u003eRecommended gap setting at 1.0 mm.\u003c\/li\u003e\n\u003cli\u003eEnsures accurate signal transmission within system limits.\u003c\/li\u003e\n\u003cli\u003eMaintains performance in high-frequency applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eMechanical and Material Design\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInsulated with fluoroethylene propylene (FEP).\u003c\/li\u003e\n\u003cli\u003eOptional stainless steel armor enhances durability.\u003c\/li\u003e\n\u003cli\u003eConnector made from gold-plated brass.\u003c\/li\u003e\n\u003cli\u003eDesigned for long-term industrial reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eMechanical Strength\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum tensile strength rated at 220 N.\u003c\/li\u003e\n\u003cli\u003eSupports secure connection between probe and system.\u003c\/li\u003e\n\u003cli\u003eResists mechanical stress in industrial installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eEnvironmental Capability\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOperating temperature from -52°C to +177°C.\u003c\/li\u003e\n\u003cli\u003eSuitable for extreme industrial environments.\u003c\/li\u003e\n\u003cli\u003eMaintains insulation performance under temperature stress.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation and Integration\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure total system length matches sensor requirements.\u003c\/li\u003e\n\u003cli\u003eCompatible with NSv probes and Proximitor sensors.\u003c\/li\u003e\n\u003cli\u003eSupports field wiring up to 305 meters.\u003c\/li\u003e\n\u003cli\u003eRecommended use of shielded triad cable for wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication Scenarios\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRotating machinery monitoring systems.\u003c\/li\u003e\n\u003cli\u003eTurbines and compressors.\u003c\/li\u003e\n\u003cli\u003eIndustrial motor vibration analysis.\u003c\/li\u003e\n\u003cli\u003eOil and gas facilities.\u003c\/li\u003e\n\u003cli\u003ePower generation plants.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eDiagnostic Capability\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsures stable signal transmission for monitoring systems.\u003c\/li\u003e\n\u003cli\u003eSupports accurate fault detection.\u003c\/li\u003e\n\u003cli\u003eReduces signal loss and interference risks.\u003c\/li\u003e\n\u003cli\u003eImproves system reliability and uptime.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eGlobal PLC Spare HUB's Insight\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e\u003cspan style=\"color: #c00000;\"\u003e330930-065-11-00\u003c\/span\u003e\u003c\/strong\u003e provides durable signal connectivity.\u003c\/p\u003e\n\u003cp\u003eIt suits installations requiring extended cable lengths.\u003c\/p\u003e\n\u003cp\u003eEngineers prefer armored versions for harsh environments.\u003c\/p\u003e\n\u003cp\u003eIt integrates seamlessly with NSv proximity systems.\u003c\/p\u003e\n\u003cp\u003eRecommended for turbines, compressors, and heavy-duty machinery.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eLogistics and Delivery\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one \u003cstrong\u003e\u003cspan style=\"color: #c00000;\"\u003e330930-065-11-00\u003c\/span\u003e\u003c\/strong\u003e extension cable.\u003c\/li\u003e\n\u003cli\u003eIndustrial packaging ensures safe transport.\u003c\/li\u003e\n\u003cli\u003eShipping via FedEx, UPS, and DHL.\u003c\/li\u003e\n\u003cli\u003eDispatch within 24–48 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eWarranty Terms\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12-month warranty coverage.\u003c\/li\u003e\n\u003cli\u003eApplies under standard operating conditions.\u003c\/li\u003e\n\u003cli\u003eTechnical support available during warranty period.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhy must total system length be matched?\u003c\/strong\u003e\u003cbr\u003eIt ensures proper calibration and accurate measurement results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the advantage of FluidLoc design?\u003c\/strong\u003e\u003cbr\u003eIt improves sealing and protects internal conductors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhen should armored cable be selected?\u003c\/strong\u003e\u003cbr\u003eUse it in environments with mechanical stress or vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat wiring practice improves signal quality?\u003c\/strong\u003e\u003cbr\u003eUse shielded triad cable and proper grounding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow to select the correct cable length?\u003c\/strong\u003e\u003cbr\u003eMatch cable length with probe and sensor system requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/330930_3300_NSv_Extension_Cable.png?v=1778057366\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45106899222710,"sku":"330930-065-11-00","price":268.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/BentlyNevada330930_16.jpg?v=1778057450"}],"url":"https:\/\/www.plcsparehub.com\/collections\/frontpage.oembed?page=2","provider":"Global PLC Spare Hub","version":"1.0","type":"link"}