{"product_id":"e30013-ifm-welding-adapter-for-process-sensors-316l-stainless-steel-g1","title":"E30013 IFM Welding Adapter for Process Sensors | 316L Stainless Steel G1","description":"\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #008000;\"\u003eE30013\u003c\/span\u003e IFM Welding Adapter for Process Sensors\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eE30013\u003c\/strong\u003e from \u003cstrong\u003eifm electronic\u003c\/strong\u003e is a stainless steel welding adapter designed to provide a process connection for compatible sensors. It features a G 1 sealing-cone sensor connection and a Ø 50 mm welding connection. Its wetted surfaces use 1.4404 \/ 316L stainless steel, with a specified surface finish of Ra less than 0.4 and Rz 4.\u003c\/p\u003e\n\u003cp\u003eFor process engineers and maintenance teams, the main selection factors are sensor interface geometry, process pressure, material compatibility, and the suitability of the welded installation. The adapter has a stated pressure rating of 150 bar for the sensor-to-adapter connection; this value should not automatically be treated as the pressure rating of the entire process assembly.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eConnection Design at a Glance\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e ifm electronic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e E30013\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct designation:\u003c\/strong\u003e WELDING ADAPT G1 V4A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Welding adapter for process sensors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor connection:\u003c\/strong\u003e G 1 sealing cone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcess connection:\u003c\/strong\u003e Ø 50 mm welding adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted material:\u003c\/strong\u003e Stainless steel 1.4404 \/ 316L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface finish:\u003c\/strong\u003e Ra less than 0.4; Rz 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 300 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack quantity:\u003c\/strong\u003e 1 piece\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePressure Limits and Application Responsibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer specifies a pressure rating of \u003cstrong\u003e150 bar\u003c\/strong\u003e for the connection between the sensor and adapter. The maximum allowable working pressure (MAWP) listed for applications according to CRN is also 150 bar.\u003c\/p\u003e\n\u003cp\u003eBefore installation, engineers should distinguish the adapter's stated rating from the allowable pressure of the complete assembly. The sensor, adapter interface, weld, process vessel or pipe, and operating conditions must all be suitable for the intended service.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVerify the pressure requirements for the specific process and operating cycle.\u003c\/li\u003e\n\u003cli\u003eConfirm that the selected sensor uses the required G 1 sealing-cone connection.\u003c\/li\u003e\n\u003cli\u003eAssess the welded connection and surrounding process equipment for the intended pressure and temperature conditions.\u003c\/li\u003e\n\u003cli\u003eFor CRN-related applications, review the requirements applicable to the complete installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eMaterial and Surface Finish for Process Service\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe wetted parts use stainless steel 1.4404 \/ 316L. The specified surface characteristics are Ra less than 0.4 and Rz 4. These details can be important when selecting process connections for applications that require controlled surface quality or resistance to the process medium.\u003c\/p\u003e\n\u003cp\u003eMaterial suitability still depends on the actual medium, concentration, temperature, cleaning agents, and operating conditions. The manufacturer specifically requires users to check compatibility between the medium and product material for every application. Do not assume that a stainless steel designation alone establishes suitability for every chemical or cleaning process.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eSuitable Equipment and Application Scenarios\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe E30013 can be considered for installations using compatible process sensors where a Ø 50 mm welded process connection and G 1 sealing-cone sensor interface meet the mechanical requirements.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure measurement assemblies:\u003c\/strong\u003e For compatible pressure sensors installed on a suitable welded process connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial process lines:\u003c\/strong\u003e For sensor mounting where the pipework, weld design, and pressure conditions support the intended installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcess vessels and skids:\u003c\/strong\u003e For integrating compatible instruments into engineered process assemblies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance and replacement:\u003c\/strong\u003e For replacing an existing adapter after confirming connection geometry, material, surface finish, and pressure requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese are potential application scenarios based on the adapter's connection and material specifications, not a claim of universal compatibility with every sensor, medium, or process system.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation and Engineering Checks\u003c\/strong\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfirm the sensor interface.\u003c\/strong\u003e Check that the sensor connection is G 1 with the required sealing-cone geometry. A matching nominal thread size alone does not prove interface compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the process opening.\u003c\/strong\u003e Verify that the Ø 50 mm welding-adapter format suits the installation drawing and process connection design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReview material compatibility.\u003c\/strong\u003e Evaluate the wetted stainless steel against the actual medium, concentration, temperature, and cleaning procedure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValidate pressure suitability.\u003c\/strong\u003e Confirm the sensor-to-adapter connection rating and the allowable pressure of the complete welded assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect the welded installation.\u003c\/strong\u003e Use the site's approved welding, inspection, and pressure-test procedures for the process equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument the installation.\u003c\/strong\u003e Record the adapter part number, sensor type, process conditions, and inspection results for future maintenance.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e\u003cstrong\u003eField Diagnostics: Finding Connection-Related Problems\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe E30013 is a mechanical adapter, not an electronic measurement module. It does not provide its own signal diagnostics. Troubleshooting should therefore focus on the mechanical interface, the sensor, and the installed process connection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEvidence of leakage:\u003c\/strong\u003e Depressurize and isolate the process according to site procedures, then inspect the sealing interface and installation condition. Do not tighten or remove components under pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor does not seat correctly:\u003c\/strong\u003e Verify the G 1 sealing-cone interface and inspect for damage, contamination, or mismatched connection geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepeated corrosion or surface damage:\u003c\/strong\u003e Review the process medium, cleaning chemicals, and operating conditions against the material specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure-test failure:\u003c\/strong\u003e Evaluate the sensor seal, adapter interface, weld, and surrounding equipment as separate potential leak paths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecurring installation issues:\u003c\/strong\u003e Compare the installed adapter and sensor against the engineering drawing and equipment records before ordering a replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eStandards and Regulatory Considerations\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer's documentation notes that possible classification under the Pressure Equipment Directive (PED) depends on the application and must be determined by the user or operator. The documentation also states that the adapter is intended for use in devices, machines, and installations outside the categories covered by technical rule TR CU 032\/2013.\u003c\/p\u003e\n\u003cp\u003eThese notes do not establish blanket approval for every installation. The responsible engineer or operator must determine the applicable regulatory requirements for the complete system and intended use.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eGlobal PLC Spare HUB's Insight\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eWhen selecting a welding adapter, experienced maintenance teams check more than the nominal connection size. The sealing-cone geometry, welded process opening, wetted material, and pressure boundary all influence whether the adapter is appropriate for a specific sensor installation.\u003c\/p\u003e\n\u003cp\u003eFor the \u003cstrong\u003eE30013\u003c\/strong\u003e, the 150 bar figure applies to the sensor-to-adapter connection, while the CRN-related MAWP is also listed as 150 bar. Engineers should still verify the ratings of the sensor, weld, and process equipment before approving the assembly. Material compatibility must be assessed against the actual medium and operating conditions.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003ePurchasing Checklist\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the exact part number: \u003cstrong\u003eE30013\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eMatch the G 1 sealing-cone sensor connection.\u003c\/li\u003e\n\u003cli\u003eVerify the Ø 50 mm welding-adapter process connection.\u003c\/li\u003e\n\u003cli\u003eConfirm the 1.4404 \/ 316L wetted material and specified surface finish.\u003c\/li\u003e\n\u003cli\u003eReview the 150 bar sensor-to-adapter pressure rating and the requirements of the complete assembly.\u003c\/li\u003e\n\u003cli\u003eCheck medium compatibility and any application-specific regulatory requirements.\u003c\/li\u003e\n\u003cli\u003eConfirm quantity and delivery destination when requesting a quotation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eWarranty and Shipping\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month warranty, subject to the seller's written terms and conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping methods:\u003c\/strong\u003e FedEx, UPS, or DHL, subject to destination and service availability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDispatch planning:\u003c\/strong\u003e A 24–48-hour dispatch target may be available after order and stock confirmation. Confirm the actual schedule before purchase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuotation support:\u003c\/strong\u003e Provide the part number, required quantity, destination, and intended sensor or process connection details to support order review.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ1: Is a G 1 connection sufficient to confirm that a sensor will fit the E30013?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The sensor must match the specified G 1 sealing-cone interface, not just the nominal connection size. Check the sensor documentation and mechanical drawing before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ2: Can the 150 bar rating be used as the pressure limit for the entire pipework assembly?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot by itself. The stated rating applies to the sensor-to-adapter connection, and the CRN-related MAWP is listed as 150 bar. The sensor, weld, pipework or vessel, and other pressure-boundary components must also meet the applicable operating requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ3: What information is most useful when replacing an adapter in a process line?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRecord the existing adapter part number, sensor interface, process connection dimensions, wetted material, operating pressure, and process medium. Photographs and engineering drawings can help identify differences that a nominal thread measurement may miss.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ4: Does the specified stainless steel guarantee compatibility with aggressive cleaning chemicals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Compatibility depends on the chemical composition, concentration, temperature, exposure time, and operating conditions. Evaluate the actual medium against the 1.4404 \/ 316L material specification before approving the installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ5: What should be investigated if leakage appears after sensor installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFirst isolate and depressurize the system under the site's safety procedure. Then inspect the sealing-cone interface, sensor compatibility, adapter condition, and welded connection. Use approved inspection and pressure-test methods to identify the leak source before returning the equipment to service.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/E30013.png?v=1792141493\" alt=\"\"\u003e\u003c\/p\u003e","brand":"IFM","offers":[{"title":"Default Title","offer_id":67651816325302,"sku":"E30013","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7863\/8774\/files\/E30013-3_7d76de49-34aa-41a6-888c-11187fe9fdbd.jpg?v=1792143052","url":"https:\/\/www.plcsparehub.com\/ar\/products\/e30013-ifm-welding-adapter-for-process-sensors-316l-stainless-steel-g1","provider":"Global PLC Spare Hub","version":"1.0","type":"link"}